locked JTalert with WSJT and ACLog
|
Terence Taylor <n6mon@...>
I have ACLog set up and installed JTAlert for WSJTx. The contacts appear in ACLog, the only issue is that the mode gets sent as SSB not JT8 and the signal reports get set as 59 not the WSJTx signal reports (DBm).
|
|
|
|
David De Coons
In WSJT-X radio setup do you have the mode set to DATA/PKT?
I am using WSJT-X 2.2.2, JTAlert 2.16.15, and AC Log 6.7. The radio is a Flex 6700.
In AC Log under Settings/Rig Interface use Mode Determined by Rig. The radio should be set to USB data mode. What is your radio?
73 Dave wo2x
From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of Terence Taylor
I have ACLog set up and installed JTAlert for WSJTx. The contacts appear in ACLog, the only issue is that the mode gets sent as SSB not JT8 and the signal reports get set as 59 not the WSJTx signal reports (DBm).
|
|
|
|
Terence Taylor <n6mon@...>
Answers below
On 11/9/2020 10:49 AM, David De Coons wrote: *Yes IC-7300*
|
|
|
|
David De Coons
In WSJT-X Settings/Radio you should have it set to IC-7300 and have mode set to Data/Pkt. Then radio should be in USB Data
toggle quoted messageShow quoted text
Dave wo2x
-----Original Message-----
From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of Terence Taylor Sent: Monday, November 9, 2020 4:56 PM To: Support@HamApps.groups.io Subject: Re: [HamApps] JTalert with WSJT and ACLog Answers below On 11/9/2020 10:49 AM, David De Coons wrote: *Yes IC-7300*
|
|
|
|
Terence Taylor <n6mon@...>
All of that is correct and how it is set,
On Monday, November 9, 2020, 3:11:39 PM PST, David De Coons <rocketnj@...> wrote:
In WSJT-X Settings/Radio you should have it set to IC-7300 and have mode set to Data/Pkt. Then radio should be in USB Data Dave wo2x -----Original Message----- From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of Terence Taylor Sent: Monday, November 9, 2020 4:56 PM To: Support@HamApps.groups.io Subject: Re: [HamApps] JTalert with WSJT and ACLog Answers below On 11/9/2020 10:49 AM, David De Coons wrote: > > In WSJT-X radio setup do you have the mode set to DATA/PKT? *Yes* > > I am using WSJT-X 2.2.2, JTAlert 2.16.15, and AC Log 6.7. The radio is a Flex 6700. > > *2.2.0 2.16.14 6.7* > > In AC Log under Settings/Rig Interface use Mode Determined by Rig. The radio should be set to USB data mode. What is your radio? > *Yes IC-7300*
|
|
|