Topics

locked Maunally updat GRID squares #JTDX


Danny Van Tricht ON4VT
 

Is it possible to manually edit the list of work grids ?  So far I cannot change it (I did a Log scan but not ALL worked grids are in my alert list!)

73 Danny ON4VT


HamApps Support (VK3AMA)
 

On 7/06/2020 1:17 am, Danny Van Tricht ON4VT wrote:
Is it possible to manually edit the list of work grids ?  So far I cannot change it (I did a Log scan but not ALL worked grids are in my alert list!)

73 Danny ON4VT

It is not possible to manually add Grids to the "Not Needed Lists" a Scan Log is the only way.

If you have Grids in your log that JTAlert appears not to be picking up on the Scan, the cause will be that the Band/Mode/QSLConfirmation status of those missing Grids are not matching what you have set for the Alert Band/Mode tracking and/or the QSL confirmation for the Scan.

I suggest you take a closer look at the Log entry of one of those missing Grids and double-check that it is for the correct Band & Mode and if you have QSL confirmations set for the Scan that the entry has the required QSL flags.

If you can't identify wrong Log entries I will need to get a copy of your Log (send a zipped copy to me direct) and a note of some of the Grids that are not being detected by the JTAlert scan.

de Laurie VK3AMA


HamApps Support (VK3AMA)
 

On 7/06/2020 6:33 am, HamApps Support (VK3AMA) via groups.io wrote:
will need to get a copy of your Log (send a zipped copy to me direct) and a note of some of the Grids that are not being detected by the JTAlert scan.

Don't send your actual log file, just a zipped ADIF export along with a note of a couple of Grids that are not being picked up during the Scan.

de Laurie VK3AMA