I uninstalled the runtime 5.0.7, and installed 5.0.6. That worked, for a while. Unfortunately, I rebooted the PC to test some backup SW, and the new 5.0.7 update got installed again. FYI, my soundcard

I also use Win4Yaesu. I autostart HRD Logbook, but I don't autostart WSJT-X (or JTDX), nor JTAlert. Do the programs get autostarted in the same sequence as shown in the list? Is there a delay between

#JTDX

Same here. The oldest file was dated Aug 23, 2020. And I don't have any protection SW that is interfering with anything.

FT-450D is another rig that needs some ALC, otherwise power output will drop. It needs to be at least 1/3 of full scale.

Maybe your rig's ALC is set right on the hairy edge, where it starts to drop power. Try increasing the audio level just a little, to increase ALC a bit.

I echo Anthony's comment. I have over 10K QSOs and I am using HRD with Maria DB, and there are no delays or other problems. HRD is soon going to be moving away from MS Access, due to all of the proble

#HRD

Laurie, Please do not discontinue logging to HRD 6.x. It works perfectly fine for most of us, and we appreciate all of your efforts.

#HRD

For WSJT-X, you will need to copy the following files, which are located at: C:\Users\<username>\AppData\Local\WSJT-X. Copy them to the same directory in the new machine. All.txt WSJT-X.ini wsjtx.log

Joe, OK, fair enough. Yes, it does seem strange. All I can suggest is keep trying. Are you using WSJT-X, or JTDX? I recently switched over to JTDX, because it has better decode sensitivity, as well as

Joe, Like Bjorn said, the LIDS who don't know how to operate F/H mode see you working (or attempting to work) the DX in the 0 - 500 Hz slot, after the Fox has pushed you down in frequency. Then, they

It is normal for the Fox to push you up to a higher offset frequency, between 500 - 1000 Hz, if he has not successfully decoded you after 3 cycles in the 0 - 500 Hz frequency slot. At that point, your

OK, you exported and imported the HRD-ADIF version. That is better than using a standard ADIF file. However, as I said before, exporting an XML file, which is a true backup file for HRD, would have be

Better yet, do all that Laurie says, but in step 2, backup your HRD log to an XML file. Then, in step 5, restore the XML file to your log. The reason for this is that the XML file will contain all of

@JoAnn Donaldson Don't worry, that's an honest mistake. It got me a couple of times, as well. It's not always apparent that some settings are contained in the header lines, in addition to the sub-cate

David, Thanks. I'll keep you in mind in case I need any future HRD support. I skipped installing HRD .277, since the release notes indicate that it is a minor release, whose only change applies just t

#HRD

"When did you last update HRD? Nothing has changed in JTAlert with respect to HRD logging since the changes of 2.16.4 needed to accommodate the HRD 6.7.0.269 FT4 changes." HRD was last updated quite a

#HRD

Hi, I just installed JTAlert version 2.16.7. After installing, it no longer logs the Country field in HRD. The Country field displays [None] in HRD. I have QRZ XML Lookup enabled in JTalert, and my ac

#HRD

Laurie, What Gender are you using Male or Female? Female What don't you like about the new voice files? Is it the pronunciation or the accent of the announcer? The pronunciation sounds rushed, with to

Thanks Tom. I installed 2.5.1, and it installed OK. I will test it tonight. Roger AC6BW

Hi, I don't like the new spotting voice that is in the latest Ham Apps Sound 2.5.2 file. I'd like to go back to the previous version. How do I do that? I don't have an install file for the previous ve