Date   

locked Re: JT Alert 2.15.5 slow

Rich McCabe
 

I personally would wait it out.  I think Laurie might have a fix in the works.

Not for me to say though :)

Rich


locked Re: JT Alert 2.15.5 slow

Larry Bryan
 

Great but where does one find the 2.15.3? Is there an archive somewhere. Checked the files folder on groups.io but it's empty.

Larry Bryan
W8LIG/AFD5H/AFA5LB
Deputy Director Transglobal Network Operations
    


locked Re: JT Alert 2.15.5 slow

Bernd - KB7AK
 

Same issue here, downgraded to 2.15.3


locked Re: Moving programs

Michael Black
 

Help/FAQ/Move JTAlert to a new PC

de Mike W9MDB




On Sunday, December 15, 2019, 11:29:38 PM CST, Robert K. Green <ultfire@...> wrote:


Hi all,

         I have been using JTDX V2.0.1-rc129 with JTAlertX 2.11.5 on a Dell D630 XP laptop for some time quite successfully.

 

I now I need to move these two programs over to a second D630 XP laptop and need to know if I can move the original programs across without loosing the set up and the worked log including the worked B4 stations?

 

Is this possible as I really don’t wish to install new copies.    Which would be the safest way ?

 

I cant run Win7 as there are other programs on the computer which will only run under XP.

 

Thank you

 

Rob VK4ALL.

 

.

 

 


locked Moving programs

Robert K. Green <ultfire@...>
 

Hi all,

         I have been using JTDX V2.0.1-rc129 with JTAlertX 2.11.5 on a Dell D630 XP laptop for some time quite successfully.

 

I now I need to move these two programs over to a second D630 XP laptop and need to know if I can move the original programs across without loosing the set up and the worked log including the worked B4 stations?

 

Is this possible as I really don’t wish to install new copies.    Which would be the safest way ?

 

I cant run Win7 as there are other programs on the computer which will only run under XP.

 

Thank you

 

Rob VK4ALL.

 

.

 

 


locked Re: ADIF SQLLite File not found

WB8ASI Herb
 

From another Log4OM user, I increased my "Check QSO Log Record" to 7 secs. and rarely have the no log warning anymore.  It's always actually logged anyways.  All is well. 73, Herb WB8ASI

On December 15, 2019 at 9:20 PM "HamApps Support (VK3AMA)" <vk3ama.ham.apps@...> wrote:

On 16/12/2019 9:18 am, KC5KE@... wrote:
Almost the same error message with Log4OM/
Does the QSO get logged into Log4OM despite the JTAlert warning?
  • If no then you likely have a Log4OM setup problem, see the JTAlert help file for instructions.
  • If yes then double-check you have set JTAlert to use the correct sqlite file for your log, also try increasing the "Check QSO log record" time under the "Miscellaneous -> Performance" section of the Settings window.

de Laurie VK3AMA


 


locked Re: ADIF SQLLite File not found

HamApps Support (VK3AMA)
 

On 16/12/2019 9:18 am, KC5KE@... wrote:
Almost the same error message with Log4OM/
Does the QSO get logged into Log4OM despite the JTAlert warning?
  • If no then you likely have a Log4OM setup problem, see the JTAlert help file for instructions.
  • If yes then double-check you have set JTAlert to use the correct sqlite file for your log, also try increasing the "Check QSO log record" time under the "Miscellaneous -> Performance" section of the Settings window.

de Laurie VK3AMA


locked Re: JT Alert 2.15.5 slow

David Burden
 

Also downgraded here to 2.15.3.

Anyone else have the issue that if you a running a busy session with back to back contacts on Ft8 and FT4 that after a while JT alert populates the current contacts DXCC with the previous contacts DXCC????

PC is not the issue as its a brand new Dell i7 with 32GB Ram.


73 David


locked Re: Decodes Window of 2.15.5 works for one JTAlert instance #FT8

m_scot_alex
 

Hi - 

Yes, I have it running. Look at the JT Alert help file - the process should still be valid. Note that there are multiple steps that include configuring the Log4OM Communicator instead of the main program and configuration in the JT Alert.

Here's a link to a YouTube video that isn't in English but the steps look valid: https://www.youtube.com/watch?v=-8V6XJvHJqc 

73,

Mike - N8MSA


On Sun, Dec 15, 2019 at 04:32 PM, <asobel@...> wrote:

Dear Mike

 

OK, I got it running, many thanks for your patients with me.

One problem: I can't get Log4OM to run too. Did you manage it?

 

Yours Sincerely

Amos 4X4MF

 


locked Re: ADIF SQLLite File not found

KC5KE@...
 

Almost the same error message with Log4OM/


locked Re: Decodes Window of 2.15.5 works for one JTAlert instance #FT8

asobel@...
 

Dear Mike

 

OK, I got it running, many thanks for your patients with me.

One problem: I can't get Log4OM to run too. Did you manage it?

 

Yours Sincerely

Amos 4X4MF

 

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of m_scot_alex
Sent: יום א 15 דצמבר 2019 21:40
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Decodes Window of 2.15.5 works for one JTAlert instance #FT8 #FT8

 

Sorry for the delay; just returned from business travel.

I'm using the Settings>Applications>Auto-Start function as shown in these screen-shots:



All of this in launched by clicking on the JTA 2.15.5 "WSJT-X" shortcut, which launches the first instance of JTA which in turn launches everything else per the screen caps. Note the delays - I had to stretch those out as of 2.15.3 to prevent race conditions that caused issues during initialization.

Good luck!

73,

Mike - N8MSA

Attachments:


locked Re: JTAlert and WSJT settings.

John Petrocelli
 

For what it is wort, mine here works well.

I run several other tasks concurrently:
   10 Chrome tabs open
   2 Internet Explorer tabs
   Firefox
   Altap Salamander (file manager)
   CC Cluster

  System :
    Dell optiplex 755 dual core at 3.4 GHz
    8 GB RAM
    Windows 7 64 bit


  One other thing to mention is that I run with WSJT-X & JTAlert at elevated priority - Either "Above Normal" or "High".
  This does not seem to adversely impact any of the other things that are running concurrently
John R. Petrocelli - WA2HIP
¶¶¶¶¶¶¶¶¶¶
Primary Home Page:
   http://wa2hip.com
On 12/15/2019 8:02 PM, N2TK, Tony via Groups.Io wrote:

Got it working. And it works fine except for the delay in JTAlert  2.15.5. But I can live with that.

N2tK, Tony

 

From: tony.kaz@... <tony.kaz@...>
Sent: Saturday, December 14, 2019 2:56 PM
To: 'Support@HamApps.groups.io' <Support@HamApps.groups.io>
Subject: RE: [HamApps] JTAlert and WSJT settings.

 

I should add I use WSJT-V DXbase Bridge so QSO’s from WSJT are automatically loaded into DXBase.

N2TK, Tony

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of N2TK, Tony via Groups.Io
Sent: Saturday, December 14, 2019 2:25 PM
To: Support@HamApps.groups.io
Subject: [HamApps] JTAlert and WSJT settings.

 

 

Help. I am confused. What I am trying to do is setup JTAlert/WSJT so that the calls I see highlighted in JTAlert are for countries that I have not confirmed on a particular band for FT8/FT4.I also want to see the calls in a different color that I have worked but not confirmed for a particular band. Is this possible?
I am still; using DXBase. I import my adif file from DXBase into JTAlert on a weekly basis until I install DXLab.

Tnx

N2TK, Tony



locked Re: JTAlert and WSJT settings.

N2TK, Tony
 

Got it working. And it works fine except for the delay in JTAlert  2.15.5. But I can live with that.

N2tK, Tony

 

From: tony.kaz@... <tony.kaz@...>
Sent: Saturday, December 14, 2019 2:56 PM
To: 'Support@HamApps.groups.io' <Support@HamApps.groups.io>
Subject: RE: [HamApps] JTAlert and WSJT settings.

 

I should add I use WSJT-V DXbase Bridge so QSO’s from WSJT are automatically loaded into DXBase.

N2TK, Tony

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of N2TK, Tony via Groups.Io
Sent: Saturday, December 14, 2019 2:25 PM
To: Support@HamApps.groups.io
Subject: [HamApps] JTAlert and WSJT settings.

 

 

Help. I am confused. What I am trying to do is setup JTAlert/WSJT so that the calls I see highlighted in JTAlert are for countries that I have not confirmed on a particular band for FT8/FT4.I also want to see the calls in a different color that I have worked but not confirmed for a particular band. Is this possible?
I am still; using DXBase. I import my adif file from DXBase into JTAlert on a weekly basis until I install DXLab.

Tnx

N2TK, Tony


locked Re: Decodes Window of 2.15.5 works for one JTAlert instance #FT8

m_scot_alex
 

Sorry for the delay; just returned from business travel.

I'm using the Settings>Applications>Auto-Start function as shown in these screen-shots:



All of this in launched by clicking on the JTA 2.15.5 "WSJT-X" shortcut, which launches the first instance of JTA which in turn launches everything else per the screen caps. Note the delays - I had to stretch those out as of 2.15.3 to prevent race conditions that caused issues during initialization.

Good luck!

73,

Mike - N8MSA


locked Re: JT Alert 2.15.5 slow

f8nhf
 

Good evening, everyone.

I have the same problem

F8NHF Denis


locked Re: JT Alert 2.15.5 slow

Björn SM7IUN
 

Same here. Several seconds before the calls show up.

Björn SM7IUN

Den sön 15 dec. 2019 kl 11:08 skrev <pa3cps@...>:

same here

Geert
pa3cps


locked Re: SV2HXX-JTALERTX

VASILEIOS ROVAS <sv2hxx.rovasvasilis@...>
 

SEND YOU EMAIL FROM MAIN PROGRAMM I WAIT YOU!!!

Στις Κυρ, 15 Δεκ 2019 στις 12:56 π.μ., ο/η HamApps Support (VK3AMA) <vk3ama.ham.apps@...> έγραψε:

On 15/12/2019 1:34 am, VASILEIOS ROVAS wrote:
what files exactly do you want me to send? the files in the programm files of the program?

Just use the "Help" (or "? ") -> "Contact Support" menu, on the main JTAlert window. The necessary files are automatically sent.

de Laurie VK3AMA


locked Re: JT Alert 2.15.5 slow

pa3cps@...
 

same here

Geert
pa3cps


locked Re: after update problem

ne1y@...
 

perfect ... thanks for a great product that is really addicting.   NE1Y   


locked Re: SV2HXX-JTALERTX

HamApps Support (VK3AMA)
 

On 15/12/2019 1:34 am, VASILEIOS ROVAS wrote:
what files exactly do you want me to send? the files in the programm files of the program?

Just use the "Help" (or "? ") -> "Contact Support" menu, on the main JTAlert window. The necessary files are automatically sent.

de Laurie VK3AMA