Date   

locked Re: Scan Log and Rebuild Kills my 'Wanted Settings'

scubajosh77@...
 

Thank you for the response.  But that does not explain how I can log a QSO with someone in New Mexico for example, and then run the Scan Log and Rebuild function, and New Mexico shows up on my Wanted List for the same band.  If I log a QSO with a State, DXCC, etc. shouldn't it be removed from my want alerts when I do the Scan and Rebuild?

Josh, KN4VDR


locked Re: Scan Log and Rebuild Kills my 'Wanted Settings'

HamApps Support (VK3AMA)
 

On 17/07/2020 7:46 am, scubajosh77 via groups.io wrote:
I'm going to start off this with a disclaimer that I'm brand new to JTAlert as of yesterday so it may very well be that I don't understand something correctly.  I'm using it with JTDX.  I have an .adif log setup specifically for JTAlert.  When I log a QSO with a new state, it doesn't remove it from my wanted list.  Also I tried to 'Scan Log and Rebuild' the JTAlert .adif file thinking that was how to update the wanted lists against the log, but doing so reset all of my wanted settings.  Have I mis-configured something?  I thought the whole point of the wanted lists was to keep track of your completed QSO goals?

OM (Name?, Callsign?),

The Scan Log & Rebuild will rebuild your Wanted Alert lists based on the QSOs in your Log. It is not an update so any manual changes you have made will be lost due to the rebuild. There is no need to perform manual updates of the lists if your using JTAlert with a Log. Just hit the Scan, the process is automatic.

de Laurie VK3AMA


locked Scan Log and Rebuild Kills my 'Wanted Settings'

scubajosh77@...
 

I'm going to start off this with a disclaimer that I'm brand new to JTAlert as of yesterday so it may very well be that I don't understand something correctly.  I'm using it with JTDX.  I have an .adif log setup specifically for JTAlert.  When I log a QSO with a new state, it doesn't remove it from my wanted list.  Also I tried to 'Scan Log and Rebuild' the JTAlert .adif file thinking that was how to update the wanted lists against the log, but doing so reset all of my wanted settings.  Have I mis-configured something?  I thought the whole point of the wanted lists was to keep track of your completed QSO goals?


locked Re: display stopped

Joe
 

Not sure how they got changed but the filters were, indeed, messed up.  Sorry to be a bother!

thanks,

73,

Joe/WQ6Q


locked Re: Location alert by grid

asobel@...
 

Laurie

 

The JTAlert Wanted Grid Alert is tailored for the seekers of Work All Grids Awards such as eGrid by eQSL.

It does keep a list of all NOT needed grid squares and search for all other grid squares.

I am talking about an alert for a location, Say Rome, searching for one needed grid square.

You put the location grid of Rome and get a visual and voice alert when ever a station from Rome is online.

 

Amos 4X4MF

 

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of HamApps Support (VK3AMA)
Sent: Thursday, July 16, 2020 11:13 PM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Location alert by grid

 

On 16/07/2020 4:21 pm, asobel@... wrote:

JTAlert does have a theoretical option of creating alert on location by grid.
Look at User Defined Alert.
You can use Wanted Grid as an Alert Trigger but if takes quite complicated programming to make a Wanted Grid act like Wanted Callsign.
Programmers, please provide us with a solution.
4X4MF


JTAlert already has a Wanted Grid Alert.

de Laurie VK3AMA


locked Re: Location alert by grid

HamApps Support (VK3AMA)
 

On 16/07/2020 4:21 pm, asobel@... wrote:
JTAlert does have a theoretical option of creating alert on location by grid.
Look at User Defined Alert.
You can use Wanted Grid as an Alert Trigger but if takes quite complicated programming to make a Wanted Grid act like Wanted Callsign.
Programmers, please provide us with a solution.
4X4MF

JTAlert already has a Wanted Grid Alert.

de Laurie VK3AMA


locked Re: display stopped

HamApps Support (VK3AMA)
 

On 17/07/2020 5:53 am, Joe wrote:
Things were working, for weeks, then suddenly no calls were being displayed in the JTAlert app main window.  WSJTX is decoding them, the JTAlert decode window shows them, but no callsigns are being displayed.

Ring a bell with anyone??

Joe/WQ6Q

Joe,

If the Decodes window is displaying decodes, than the main JTAlert processing is working.

The missing callsigns in the main display will be due to having one or more Alert filters set. JTAlert will be showing "Filter" in the titlebar status text. What filters do you have set under the "Alerts -> Filters" menu?

Are you sure that ALL decoded callsigns are non-displaying or do you randomly get some callsigns displayed like only CQs?

A couple of possibilities...
  • The "Show only callsigns generating Alerts" filter is set, but you don't have any Alert types enabled.

  • One of the QSL membership (lotw, eqsl) filters is set, but the Callsign database file (which contains the membership data) has been removed. A reinstall of JTAlert will reinstall the missing file.

de Laurie VK3AMA




locked display stopped

Joe
 

Things were working, for weeks, then suddenly no calls were being displayed in the JTAlert app main window.  WSJTX is decoding them, the JTAlert decode window shows them, but no callsigns are being displayed.

Ring a bell with anyone??

Joe/WQ6Q


locked Location alert by grid

asobel@...
 

JTAlert does have a theoretical option of creating alert on location by grid.
Look at User Defined Alert.
You can use Wanted Grid as an Alert Trigger but if takes quite complicated programming to make a Wanted Grid act like Wanted Callsign.
Programmers, please provide us with a solution.
4X4MF


locked Re: JTAlert screen stays small

BenFieke Meyer
 

Hi Mike,

Thanks for your suggestion and it did the trick!!! I have got my proper sized JTAlert screen back and can check the settings and it was so easy!!!

Very much appreciated!!

Kind Regards

Ben Meyer, ZL1CAH



On 16/07/2020 1:20 am, Michael Black via groups.io wrote:
On Wednesday, July 15, 2020, 08:17:33 AM CDT, BenFieke Meyer <benfieke@...> wrote:


Hi There,

For some reason I cannot get the oblong screen from JTAlert on top of my
WSJT-X screen anymore. If I move the mouse over the JTAlert Icon in the
taskbar I can see a miniature oblong JTAlert screen with the callsigns
in colours, but they are too small to read and not overlayed on the
WSJT-X screen. If I click on the JTAlert Icon, I only get the WSTJ-X
screen without the oblong JTAlert screen. I also cannot check any
settings anymore for JTAlert.

I run HRD ver. 6.5.0.207 ,  WSJT-X ver 2.2.2 and JTAlert ver 2.16.8  .

Has anybody an idea how to fix this?

Regards

Ben Meyer, ZL1CAH




locked Re: JTAlert screen stays small

Kenneth Dauma
 

I had the same problem. For some reason WSJT-X got resized and it covers up JTAlert.
I pulled down the top of the WSJT-X and moved it up until I got the JTAlert window.
All is good now.

Regards

Ken
WB0YBZ

On Wed, Jul 15, 2020 at 8:17 AM BenFieke Meyer <benfieke@...> wrote:
Hi There,

For some reason I cannot get the oblong screen from JTAlert on top of my
WSJT-X screen anymore. If I move the mouse over the JTAlert Icon in the
taskbar I can see a miniature oblong JTAlert screen with the callsigns
in colours, but they are too small to read and not overlayed on the
WSJT-X screen. If I click on the JTAlert Icon, I only get the WSTJ-X
screen without the oblong JTAlert screen. I also cannot check any
settings anymore for JTAlert.

I run HRD ver. 6.5.0.207 ,  WSJT-X ver 2.2.2 and JTAlert ver 2.16.8  .

Has anybody an idea how to fix this?

Regards

Ben Meyer, ZL1CAH





locked Re: JTAlert screen stays small

Michael Black
 

On Wednesday, July 15, 2020, 08:17:33 AM CDT, BenFieke Meyer <benfieke@...> wrote:


Hi There,

For some reason I cannot get the oblong screen from JTAlert on top of my
WSJT-X screen anymore. If I move the mouse over the JTAlert Icon in the
taskbar I can see a miniature oblong JTAlert screen with the callsigns
in colours, but they are too small to read and not overlayed on the
WSJT-X screen. If I click on the JTAlert Icon, I only get the WSTJ-X
screen without the oblong JTAlert screen. I also cannot check any
settings anymore for JTAlert.

I run HRD ver. 6.5.0.207 ,  WSJT-X ver 2.2.2 and JTAlert ver 2.16.8  .

Has anybody an idea how to fix this?

Regards

Ben Meyer, ZL1CAH




locked JTAlert screen stays small

BenFieke Meyer
 

Hi There,

For some reason I cannot get the oblong screen from JTAlert on top of my WSJT-X screen anymore. If I move the mouse over the JTAlert Icon in the taskbar I can see a miniature oblong JTAlert screen with the callsigns in colours, but they are too small to read and not overlayed on the WSJT-X screen. If I click on the JTAlert Icon, I only get the WSTJ-X screen without the oblong JTAlert screen. I also cannot check any settings anymore for JTAlert.

I run HRD ver. 6.5.0.207 ,  WSJT-X ver 2.2.2 and JTAlert ver 2.16.8  .

Has anybody an idea how to fix this?

Regards

Ben Meyer, ZL1CAH


locked Re: Color blind #FT8

HamApps Support (VK3AMA)
 

On 15/07/2020 10:49 am, kk6mf@... wrote:
I have a friend who is Color blind to some extent and he is attempting to use WSJT-X & JT Alarm.
Is there or could there be a option to help with Color Blindness.  A symbol that could added to or added to a colored line?

Tnx, Larry - KK6MF
If your referring to JTAlert rather than WSJT-X, try using the Decodes Window. Each of the Wanted types, Dxcc, State, Cont, Grid, etc, have their own column and if the decode generates one or more alerts the corresponding column cell in the display with be highlighted. While the Callsigns coloring is restricted to a single (highest priority) Alert, the Decodes window can show in a single line all the Alerts that were generated for that Callsign/decode.

de Laurie VK3AMA


locked Re: Color blind #FT8

g4wjs
 

On 15/07/2020 03:18, kk6mf@lbliss.com wrote:
Well.. Not that it right solution to help with color blindness, just a thought. The colors represent a lot of things, whether you work the operator before, New grid, New prefix, DX, someone calling/answering you, etc..  How can you differentiate them when you are color blind? At the same time, not eliminating color all together. The only thing I could come up with was a symbol.
It could be a W for worked, or Even a G for Green, or R for Red. With the Stay at Home restriction and 150 mile separation and not seeing his screen.
I'm at a loss to get him active and on the air, I'm open to any and all suggestions.

How are other Color Blind operators handling it?

Tnx, Larry - KK6MF
Larry,

in WSJT-X all those colours are user definable. Most colour blindness is an inability to differentiate two or three hues, others that are distinguishable can be selected. The highlights in WSJT-X for new DXCC, Continent, or Zones are all accompanied by a text description on the end of the line, Own Call should be obvious, so it seems to me that the only differentiable colours that need to be customized are those that denote CQ, New Call, New Call on Band, New Grid, and New Grid on Band.

73
Bill
G4WJS.



--
73
Bill
G4WJS.


locked Re: Color blind #FT8

Larry Bliss
 

Well.. Not that it right solution to help with color blindness, just a thought. The colors represent a lot of things, whether you work the operator before, New grid, New prefix, DX, someone calling/answering you, etc..  How can you differentiate them when you are color blind? At the same time, not eliminating color all together. The only thing I could come up with was a symbol.
It could be a W for worked, or Even a G for Green, or R for Red. With the Stay at Home restriction and 150 mile separation and not seeing his screen.
I'm at a loss to get him active and on the air, I'm open to any and all suggestions.

How are other Color Blind operators handling it?

Tnx, Larry - KK6MF


locked Re: Color blind #FT8

g4wjs
 

On 15/07/2020 01:49, kk6mf@... wrote:
I searched for "Color Blind" and only found 2 messages that did not answer my question.

I have a friend who is Color blind to some extent and he is attempting to use WSJT-X & JT Alarm.
Is there or could there be a option to help with Color Blindness.  A symbol that could added to or added to a colored line?

Tnx, Larry - KK6MF

Hi Larry,

I'm don't understand what "A symbol that could added to or added to a colored line?" entails. Is there some specific part of the WSJT-X user interface that is causing them problems?

73
Bill
G4WJS.


--
73
Bill
G4WJS.


locked Color blind #FT8

Larry Bliss
 

I searched for "Color Blind" and only found 2 messages that did not answer my question.

I have a friend who is Color blind to some extent and he is attempting to use WSJT-X & JT Alarm.
Is there or could there be a option to help with Color Blindness.  A symbol that could added to or added to a colored line?

Tnx, Larry - KK6MF


locked Re: Alert Types Window shows on all desktops

Joe, KO8V
 

Thank you for fixing this.  I've been an advocate of this program for a couple of years.  I just started using its custom coding. I started using the window to remind me of my codings.  That's when I noticed it.  


again thanks for the great work y'all do.  This is an invaluable program.  
--
73
Joe, KO8V


locked Re: Time and band stamp

Michael Black
 

It's in WSJT-X and it adds the timestamp of the current decode if it has enough room to display it.

Nothing to do with JTAlert.

Why do you ask?

Mike W9MDB




On Tuesday, July 14, 2020, 04:14:08 PM CDT, richard clare <crrr@...> wrote:


I was wondering what causes the time and band stamp on the waterfall of WSJT-X? Richard wb6ewm

5421 - 5440 of 36207