Date   

locked Re: Alaska

Bill - AA4M
 

I don't understand your question!

Maybe if I re-phrase  my question.  When JTAlert sees a call outside of CONUS, it colors the call red with a yellow background.  When I work these stations, JTAlert then displays then shows the call with black text on a dark red background.  Normally this works fine.  The exception was an hour ago or so when I worked 2 Alaskan stations on 17M FT8, yet they continued to show as red text on a yellow background (not worked on this band).  I double checked and yes, my log showed them as worked on 17M but JTAlert said they had not been worked on 17M.

73, Bill - AA4M


On 02/09/2020 14:47:25, Brian (N2MLP) wrote:

Confirmed?

 

========================

         de N2MLP Brian

       Monroe County PA

 

 

========================

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of Bill - AA4M
Sent: Sunday, February 9, 2020 4:34 PM
To: Support@HamApps.groups.io
Subject: [HamApps] Alaska

 

I just worked 2 different Alaskan stations on 17M FT8, but they continue to be displayed in my NOT "Worked-B4" color scheme.  All others on the band seem to be identified OK by JTAlert.  What does the program have against our 49th state?  :)

73, Bill  AA4M



locked Re: Audio Error?

Bill - AA4M
 

I installed the virtual cable, rebooted, then assigned Windows to my usual sound driver and WSJT-X to its CODEC driver.  The good news is that I now have Windows sounds when working FT8, but the bad news is that I still get the sound error from JTAlert.  I think I don't understand how the "virtual cable" is actually supposed to work!

73, Bill  AA4M


locked Re: Alaska

Ron W3RJW
 

Certain stations do not show as worked B4 in the latest version during a session. Laurie is working on it.  How about when you restart JTAlert ?
--
73
Ron, W3RJW


locked Re: JTAlert Text Message functions perfectly.

Ron W3RJW
 

Mark,  Were you sleeping in a cocoon in your neighbors pool ??  HiHi
--
73
Ron, W3RJW


locked Re: Alaska

Brian (N2MLP)
 

Confirmed?

 

========================

         de N2MLP Brian

       Monroe County PA

 

 

========================

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of Bill - AA4M
Sent: Sunday, February 9, 2020 4:34 PM
To: Support@HamApps.groups.io
Subject: [HamApps] Alaska

 

I just worked 2 different Alaskan stations on 17M FT8, but they continue to be displayed in my NOT "Worked-B4" color scheme.  All others on the band seem to be identified OK by JTAlert.  What does the program have against our 49th state?  :)

73, Bill  AA4M


locked Alaska

Bill - AA4M
 

I just worked 2 different Alaskan stations on 17M FT8, but they continue to be displayed in my NOT "Worked-B4" color scheme.  All others on the band seem to be identified OK by JTAlert.  What does the program have against our 49th state?  :)

73, Bill  AA4M


locked Re: Sending spots to Spot Collector

Gregg Marco W6IZT
 

Dave:

Thank for your prompt reply. I press CRTL while clicking on the X in thew
filter panel. There are no spots being displayed.

73
Gregg W6IZT

-----Original Message-----
From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of
Dave AA6YQ
Sent: Sunday, February 9, 2020 17:52
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Sending spots to Spot Collector

+ AA6YQ comments below

Using V 2.15.7

Applications>DXLAB Suite, Post decoded Callsigns to spot collector as local
spots is enabled. Spots are not appearing in Spot
Collector.

Perhaps I'm missing something. Any assistance to help me work through this
is greatly appreciated.

+ Please depress your keyboard's CTRL key while clicking the X button in the
Filter panel at the bottom of SpotCollector's Main
window; do the callsigns posted by JTAlert now appear in SpotCollector's
Spot Database Display?

73,

Dave, AA6YQ


locked Re: JTAlert causing DX Keeper to filter Log on Startup #DXLAB

Stewart Wilkinson
 

Thanks Bill.

I never knew that either of those keys did that - I've always used the Mouse to click the 'Enable Tx' or 'Halt Tx'.


locked Re: B4 Display using multiple QTHs

Michael Black
 

Put your log in Dropbox or OneDrive and you won't have to export/import anything.

Just point your logger to the Dropbox/OneDrive file.






On Sunday, February 9, 2020, 01:36:08 PM CST, wmmcc via Groups.Io <wmmcc@...> wrote:


First of all, Thanks to Laurie for JTAlert, I use it daily and am most grateful for all the work.

I have two primary QTHs, about an hour drive apart, both set of software programmed in WSJT-X with the appropriate quadrant locations.  I use Flex radio SmartSDR 3.1.8, WSJT-X and Ham Radio Deluxe logger with JT Alert.   JTAlert(2.15.9), WSJT-X (2.1.2) and HRD Log (6.7.0.244) are all current versions as of today, February 9, 2020.

My problem is trying to coordinate the "B4" designation to the JTAlert call sign labels.  My normal workflow is to backup the HRD logbook and restore at the other QTH.  And I suspect this is part of the problem.  But I can find no information on how to back load the HRD log entries from a separate QTH (but identical call sign etc) into JTAlert so the "B4" designations are accurate.  I see no way to do this on the help files, but wonder if I can load exported HRD Log ADIF files back into JTAlert in some way.  I find the "B4" labels quite helpful.

And BTW, thanks for the alternate view option in JTAlert 2.15.9.  Looks much better and more convenient.

Thanks for any help....

Bill
ARS KK4C


locked removing jtalert

Daniel Curry <dod1450@...>
 

  How do I remove all the jtalerts apps in windows 10?


locked QSO Not Logged

Ernex de la Ossa
 

 

 

Good afternoon, I'm addressing you because I update LOG4OM and I can't upload my contacts from WSJT-X to the LOG4OM guard book, I use LOG4 = M 2.3.0.0, WSJT-X 2.1.2 and JTAlert 2.15.9, the routes of SQLite, both in LOG40M and JTAlert are identical, the "logging time" I tried 5 secs and 8secs and I don't get it, it always comes out "Failure: QSO not Logged, ERROR Message: LOG4OM V2 SQLite: Unable to confirm QSO Logged, NOTE : The QSO is still saved to the WSJT-X Log File. "
I enclose screenshots of my configuration and the "config.json" file of LOG4OM, in case you can help me.

Very grateful in advance, receive a cordial greeting.

 

 

Configuration LOG4OM:

 

 

 

Configuration WSJT-X:

 

 

 

AMATEUR RADIO STATION

EA-4-DF

OP. Ernesto De La Ossa

ITU ZONE: 37     LOCATOR: IN80la    CQ ZONE: 14

16400 Tarancón (Cuenca)

ESPAÑA

 


locked B4 Display using multiple QTHs

wmmcc@...
 

First of all, Thanks to Laurie for JTAlert, I use it daily and am most grateful for all the work.

I have two primary QTHs, about an hour drive apart, both set of software programmed in WSJT-X with the appropriate quadrant locations.  I use Flex radio SmartSDR 3.1.8, WSJT-X and Ham Radio Deluxe logger with JT Alert.   JTAlert(2.15.9), WSJT-X (2.1.2) and HRD Log (6.7.0.244) are all current versions as of today, February 9, 2020.

My problem is trying to coordinate the "B4" designation to the JTAlert call sign labels.  My normal workflow is to backup the HRD logbook and restore at the other QTH.  And I suspect this is part of the problem.  But I can find no information on how to back load the HRD log entries from a separate QTH (but identical call sign etc) into JTAlert so the "B4" designations are accurate.  I see no way to do this on the help files, but wonder if I can load exported HRD Log ADIF files back into JTAlert in some way.  I find the "B4" labels quite helpful.

And BTW, thanks for the alternate view option in JTAlert 2.15.9.  Looks much better and more convenient.

Thanks for any help....

Bill
ARS KK4C


locked Re: Sending spots to Spot Collector

Dave AA6YQ
 

+ AA6YQ comments below

Using V 2.15.7

Applications>DXLAB Suite, Post decoded Callsigns to spot collector as local spots is enabled. Spots are not appearing in Spot
Collector.

Perhaps I'm missing something. Any assistance to help me work through this is greatly appreciated.

+ Please depress your keyboard's CTRL key while clicking the X button in the Filter panel at the bottom of SpotCollector's Main
window; do the callsigns posted by JTAlert now appear in SpotCollector's Spot Database Display?

73,

Dave, AA6YQ


locked Re: audio

Michael Black
 

You need to change the JTAlert sound card to your speakers -- not the rig audio device.

de Mike W9MDB




On Sunday, February 9, 2020, 10:34:48 AM CST, <lozere15@...> wrote:


here is the message that i have after starting
thank you
73


locked Re: audio

lozere15@...
 

here is the message that i have after starting
thank you
73


locked Sending spots to Spot Collector

Gregg Marco W6IZT
 

Using V 2.15.7

 

Applications>DXLAB Suite, Post decoded Callsigns to spot collector as local spots is enabled. Spots are not appearing in Spot Collector.

 

Perhaps I’m missing something. Any assistance to help me work through this is greatly appreciated.

 

73

Gregg W6IZT


locked Re: audio

Michael Black
 

To do what?

Mike




On Sunday, February 9, 2020, 08:20:16 AM CST, <lozere15@...> wrote:


I think you have to have two microphone input
73


locked Re: audio

Michael Black
 

Please explain exactly what you are trying to do....

Why do you need a 2nd microphone input?  Microphone inputs have nothing to do with JTAlert.  JTAlert doesn't record anything and only plays back through a speaker device which can be used/shared by all other applications on your computer.

de Mike W9MDB



On Sunday, February 9, 2020, 08:17:48 AM CST, lozere15@... <lozere15@...> wrote:


thank you for your reply
with which interface to have a second microphone input
to make jt work
73 friends


locked Re: audio

lozere15@...
 

I think you have to have two microphone input
73


locked Re: audio

lozere15@...
 

thank you for your reply
with which interface to have a second microphone input
to make jt work
73 friends