|
locked
Re: 2.16.16 crashes
Dennis
Windows 7 32bit, 4gig RAM, approximately 150 73, de N4QM
On Sunday, December 6, 2020, 01:42:37 PM EST, HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:
On 7/12/2020 4:33 am, Dennis wrote: > I'll be installing the new PC Tuesday so hopefully this will > be a thing of the past for me. > -- > 73, de N4QM What Windows version are you currently running that you're getting this error? Is it an old Server version? de Laurie VK3AMA
|
|
|
|
locked
Re: FT8 & FT4 transmission intermittent problem
Bob Davet
I have another Signalink.
Was thinking about switching them out and seeing if the problem goes away. Just wanted to get some ideas from others. Thanks Bob W8RID
|
|
|
|
locked
QSO History Popup Colors
Paul AC9O
Just curious, what do the different colors mean? Doesn't seem to be related to Worked/Confirmed. Tried to look it up but couldn't find it.
Thanks and 73 Paul, AC9O
|
|
|
|
locked
V2.16.17 - Color
Jim Denneny
The alert colors are not evident with this release. I have not found a procedure in Settings to turn them on.
73, Jim K7EG
|
|
|
|
locked
Re: Text MSG indicator
Dave Garber
Wow. Auto suggest. Ignore my last. I did not notice the square in to right corner
On Wed., Dec. 9, 2020, 11:04 a.m. Dave ve3wej, <ve3wej@...> wrote:
|
|
|
|
locked
Re: Text MSG indicator
Dave Garber
Top left indicator is frog lots user I believe.
Latest release Installed. I did see the solid square on the top right corner indicated user have text msg enabled. I also see the underline under the callsign as well. Isn't it indicates the very same thing? Or am I misunderstood the purpose of the two indicators?
|
|
|
|
locked
Re: 73/RR73
A really useful feature. Is there a way to have it not highlight "73" or "RR73" if the station is worked B4?
73 Tony G4CJC
|
|
|
|
locked
Text MSG indicator
Komkit Listisard
Latest release Installed. I did see the solid square on the top right corner indicated user have text msg enabled. I also see the underline under the callsign as well. Isn't it indicates the very same thing? Or am I misunderstood the purpose of the two indicators?
73, Kit W3KIT
|
|
|
|
locked
Re: FT8 & FT4 transmission intermittent problem
Gene Horr
Bad pot on the signalink. Try some different software level/computer speaker level/Signalink level combos.
Gene NG1H
On Tue., Dec. 8, 2020, 12:07 p.m. Bob Davet, <davet354tfd@...> wrote:
|
|
|
|
locked
Re: FT8 & FT4 transmission intermittent problem
Dave Garber
Sounds like fake it is not on and you are not insert spot
On Tue., Dec. 8, 2020, 12:07 p.m. Bob Davet, <davet354tfd@...> wrote: Not sure if I should post this here or not. So I thought I would start here and go from there.
|
|
|
|
locked
Re: FT8 & FT4 transmission intermittent problem
HamApps Support (VK3AMA)
On 9/12/2020 6:43 am, Bob Davet wrote:
I understand it is not a JTAlert issue. Your likely to get more help from the dedicated WSJT-X support group. https://wsjtx.groups.io/g/main de Laurie VK3AMA
|
|
|
|
locked
Re: FT8 & FT4 transmission intermittent problem
Hi Bob
Have you tried increasing the “dly” a bit?
Cheers David VK7YUM
From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of Bob Davet
Sent: Wednesday, 9 December 2020 6:43 AM To: Support@HamApps.groups.io Subject: Re: [HamApps] FT8 & FT4 transmission intermittent problem
PTT toggles.
|
|
|
|
locked
Re: FT8 & FT4 transmission intermittent problem
Bob Davet
PTT toggles.
I understand it is not a JTAlert issue. Just didn't know where to start so I thought I would start here to see if anyone else had the issue and where they went from her to fix it. Bob W8RID
|
|
|
|
locked
Re: 73/RR73
HamApps Support (VK3AMA)
On 7/12/2020 11:58 pm, F8RZ wrote:
See the Release Notes. The RR73 coloring was introduced with 2.16.8 and then later modified with 2.16.16 to remove the CQ Alert requirement. The colors still use the colors you have set for the CQ Alert. 2.16.8 (19-Jun-2020) 2.16.16 (18-Nov-2020) de Laurie VK3AMA
|
|
|
|
locked
Re: FT8 & FT4 transmission intermittent problem
Michael Black
Not really JTAlert related... Do you mean PTT toggles or that power level fluctuates? Mike W9MDB
On Tuesday, December 8, 2020, 11:07:16 AM CST, Bob Davet <davet354tfd@...> wrote:
Not sure if I should post this here or not. So I thought I would start here and go from there. I have been running FT8 and FT4 for a long time now. Enjoy the mode very much. I am running a IC746Pro with a USB interface with HRD Rig control. Have been pilling up the contacts. Been trying to track down this issue for a while now without any success. Randomly, during my transmissions it will rapidly fluctuate in and out of transmission. I have checked the cables from the Signalink and they are good.(actually used several different cables and it happens) Not sure where to look next. Guessing that it is probably the signalink that may be the issue. If I turn the TX knob on it rapidly back and forth then set it back where I normally have it it seems to run OK for a while. Seems like the TX knob could be "dirty"? None of this seems to be affecting my transmission that I know of. No one has let me know about any possible issues. Bob W8RID
|
|
|
|
locked
FT8 & FT4 transmission intermittent problem
Bob Davet
Not sure if I should post this here or not. So I thought I would start here and go from there.
I have been running FT8 and FT4 for a long time now. Enjoy the mode very much. I am running a IC746Pro with a USB interface with HRD Rig control. Have been pilling up the contacts. Been trying to track down this issue for a while now without any success. Randomly, during my transmissions it will rapidly fluctuate in and out of transmission. I have checked the cables from the Signalink and they are good.(actually used several different cables and it happens) Not sure where to look next. Guessing that it is probably the signalink that may be the issue. If I turn the TX knob on it rapidly back and forth then set it back where I normally have it it seems to run OK for a while. Seems like the TX knob could be "dirty"? None of this seems to be affecting my transmission that I know of. No one has let me know about any possible issues. Bob W8RID
|
|
|
|
locked
回复: [HamApps] 73/RR73
Zhang Hong
It’s usefull. I like it.
发送自 Windows 10 版邮件应用
发件人: F8RZ
H
|
|
|
|
locked
Re: 2.16.16 crashes
Coy Day
Laurie, Looks like that did the trick. I went to C:\Users\n5ok\Appdata\Local and found the HamApps folder there and deleted it. It has been running for about 30 minutes and not a single error. I'm a happy camper! I'll let it run all night here on 40m. That should be a good test. Thanks a bunch! 73, Coy
On Mon, Dec 7, 2020 at 8:27 PM Laurie, VK3AMA <hamapps.support@...> wrote:
--
|
|
|
|
locked
Re: 2.16.16 crashes
Laurie, VK3AMA
On 8/12/2020 12:29 pm, Coy Day wrote:
It came up with almost all of my settings. They must be kept in a separate folder somewhere. If I knew where they were, I would try deleting them.The only setting JTAlert should have remembered after you removed the HamApps directory is your Callsign. All other settings will have defaulted. Sounds to me like you didn't delete the correct directory. Use Windows File Explorer and navigate to %localappdata% then delete the HamApps directory. de Laurie VK3AMA
|
|
|
|
locked
Re: 2.16.16 crashes
Coy Day
Laurie, The short answer is no. I tried upgrading to 2.16.17 first but that didn't help. Next I ran the uninstall program and deleted the folder HamApps. I did a new install of 1.16.17, the sound files and the callsign database. It still comes up with the error. It came up with almost all of my settings. They must be kept in a separate folder somewhere. If I knew where they were, I would try deleting them. Not sure what to do now. It seems strange that it will run without the error as long as no callsigns are being sent from WSJT-X. When I turn the monitor back on or turn up the receive gain so that signals are being copied, it will populate the array several times before I get the error. I appreciate your efforts! 73, Coy
On Sun, Dec 6, 2020 at 12:42 PM HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:
--
|
|
|
