Date   

locked Re: 2.5.0 -- AutoIt Error

HamApps Support (VK3AMA)
 

On 13/04/2021 7:46 am, David - AK2L wrote:
Launched JTAlert a fourth time.
Main window appeared.  Callsigns window appeared.
I moved the the Callsigns window over a bit so that I could see a window underneath it.
A few seconds later, the AutoIt error appeared yet again.

>How often is this error being thrown?
Every launch.

>Does it occur with every JTAlert startup?
Yes.

>Does it occur immediately at JTAlert startup or does it occur after some time.
No.  But so far it happens within 30 seconds of starting.  Note that WSJT-X is happily decoding during this time.

Try a PC restart.

de Laurie VK3AMA


locked Re: 2.50: hid info bar at bottom of Callsigns window, but how to turn it back on?

HamApps Support (VK3AMA)
 

On 13/04/2021 7:48 am, Jim Reisert AD1C wrote:
I hid the information bar at the bottom of the Callsigns window.  Now
I want to change a setting but the gear icon is gone.  Right-clicking
on the window doesn't bring up a Settings option, so how does one turn
it back on?
Activate the window and hit F2 (the standard for all the new windows) to bring up the options popup.

de Laurie VK3AMA


locked Re: Can the display of Country name under each call in the new Callsigns window be turned off?

Jim Reisert AD1C
 

With the new windows the "Gear icon" in the status bar is your friend.
It is your access into the Options popup for changing the settings of the associated window (in real-time in most cases).
See the "JTAlert 2.50.0 features" help file, "Standard Window Functionality" topic.
The status bar is set to Hidden. There is no gear icon anymore.

--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, https://www.ad1c.us


locked Re: Can the display of Country name under each call in the new Callsigns window be turned off?

HamApps Support (VK3AMA)
 

On 13/04/2021 7:43 am, Michael Black via groups.io wrote:
Right-click the gear in the lower right corner


Left-Click is quicker.

de Laurie VK3AMA


locked Re: Can the graying of worked calls in the WSJT-X window be disabled? (2.50)

Jim Reisert AD1C
 

That turns off ALL the colors. I only want the GRAY turned off.  See Laurie's earlier response.


On Mon, Apr 12, 2021 at 3:49 PM Michael Black via groups.io <mdblack98=yahoo.com@groups.io> wrote:
Inline image

Mike W9MDB




On Monday, April 12, 2021, 04:44:05 PM CDT, Jim Reisert AD1C <jjreisert@...> wrote:


Prior to 2.50, callsigns in the WSJT-X windows were not grayed out if
already worked.  They are now.  Is there a way to turn that off?  The
existing colorization of WSJT-X by JTAlert is sufficient for my needs,
without the gray being added.

--
Jim Reisert AD1C, <jjreisert@...>, https://www.ad1c.us







--
Jim Reisert AD1C, <jjreisert@...>, https://www.ad1c.us


locked Re: Can the display of Country name under each call in the new Callsigns window be turned off?

HamApps Support (VK3AMA)
 

On 13/04/2021 7:41 am, Jim Reisert AD1C wrote:
Can the display of Country name under each call in the new Callsigns
window be turned off?  I don't need that info, and can stack more
calls vertically without it.

With the new windows the "Gear icon" in the status bar is your friend.
It is your access into the Options popup for changing the settings of the associated window (in real-time in most cases).
See the "JTAlert 2.50.0 features" help file, "Standard Window Functionality" topic.

de Laurie VK3AMA


locked Re: Can the graying of worked calls in the WSJT-X window be disabled? (2.50)

Michael Black
 

Inline image

Mike W9MDB




On Monday, April 12, 2021, 04:44:05 PM CDT, Jim Reisert AD1C <jjreisert@...> wrote:


Prior to 2.50, callsigns in the WSJT-X windows were not grayed out if
already worked.  They are now.  Is there a way to turn that off?  The
existing colorization of WSJT-X by JTAlert is sufficient for my needs,
without the gray being added.

--
Jim Reisert AD1C, <jjreisert@...>, https://www.ad1c.us






locked 2.50: hid info bar at bottom of Callsigns window, but how to turn it back on?

Jim Reisert AD1C
 

I hid the information bar at the bottom of the Callsigns window. Now
I want to change a setting but the gear icon is gone. Right-clicking
on the window doesn't bring up a Settings option, so how does one turn
it back on?

--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, https://www.ad1c.us


locked Re: Can the graying of worked calls in the WSJT-X window be disabled? (2.50)

HamApps Support (VK3AMA)
 

On 13/04/2021 7:43 am, Jim Reisert AD1C wrote:
Prior to 2.50, callsigns in the WSJT-X windows were not grayed out if
already worked.  They are now.  Is there a way to turn that off?  The
existing colorization of WSJT-X by JTAlert is sufficient for my needs,
without the gray being added.

Not currently.

de Laurie VK3AMA


locked Re: 2.5.0 -- AutoIt Error

David - AK2L
 

Launched JTAlert a fourth time.
Main window appeared.  Callsigns window appeared.
I moved the the Callsigns window over a bit so that I could see a window underneath it.
A few seconds later, the AutoIt error appeared yet again.

>How often is this error being thrown?
Every launch.

>Does it occur with every JTAlert startup?
Yes.

>Does it occur immediately at JTAlert startup or does it occur after some time.
No.  But so far it happens within 30 seconds of starting.  Note that WSJT-X is happily decoding during this time.


locked Re: Can the display of Country name under each call in the new Callsigns window be turned off?

Jim Reisert AD1C
 

Thanks. I saw the check boxes but completely missed that one!

On Mon, Apr 12, 2021 at 3:43 PM Michael Black via groups.io
<mdblack98=yahoo.com@groups.io> wrote:

Right-click the gear in the lower right corner



Mike W9MDB



On Monday, April 12, 2021, 04:41:45 PM CDT, Jim Reisert AD1C <jjreisert@alum.mit.edu> wrote:


Can the display of Country name under each call in the new Callsigns
window be turned off? I don't need that info, and can stack more
calls vertically without it.

BTW no problems installing or running the new program. The new
messages window works fine here.

--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, https://www.ad1c.us







--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, https://www.ad1c.us


locked Can the graying of worked calls in the WSJT-X window be disabled? (2.50)

Jim Reisert AD1C
 

Prior to 2.50, callsigns in the WSJT-X windows were not grayed out if
already worked. They are now. Is there a way to turn that off? The
existing colorization of WSJT-X by JTAlert is sufficient for my needs,
without the gray being added.

--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, https://www.ad1c.us


locked Re: Can the display of Country name under each call in the new Callsigns window be turned off?

Michael Black
 

Right-click the gear in the lower right corner

Inline image

Mike W9MDB



On Monday, April 12, 2021, 04:41:45 PM CDT, Jim Reisert AD1C <jjreisert@...> wrote:


Can the display of Country name under each call in the new Callsigns
window be turned off?  I don't need that info, and can stack more
calls vertically without it.

BTW no problems installing or running the new program.  The new
messages window works fine here.

--
Jim Reisert AD1C, <jjreisert@...>, https://www.ad1c.us






locked Can the display of Country name under each call in the new Callsigns window be turned off?

Jim Reisert AD1C
 

Can the display of Country name under each call in the new Callsigns
window be turned off? I don't need that info, and can stack more
calls vertically without it.

BTW no problems installing or running the new program. The new
messages window works fine here.

--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, https://www.ad1c.us


locked Re: 2.5.0 -- AutoIt Error

David - AK2L
 

Restarted JTAlert a third time.
Same AutoIt error as before.
This time all I did was resize WSJT-X; that caused the main JTAlert window to move.


locked Re: 2.5.0 -- AutoIt Error

HamApps Support (VK3AMA)
 

On 13/04/2021 7:33 am, David - AK2L wrote:
Installed 2.50.0.  Already had .NET 5.0.5 installed.

AutoIT errors are not affected by the .NET 5 desktop runtime.

The only AutoIT code left is within the main JTAlert window.

How often is this error being thrown?
Does it occur with every JTAlert startup?
Does it occur immediately at JTAlert startup or does it occur after some time.

de Laurie VK3AMA



locked Re: 2.5.0 -- AutoIt Error

David - AK2L
 

Restarted JTAlert.
Attempted to open messaging window.
Same AutoIt Error appeared.  (Same line number.)


locked 2.5.0 -- AutoIt Error

David - AK2L
 

Installed 2.50.0.  Already had .NET 5.0.5 installed.


locked Re: File being updated? v2.50.0

Kevin k5vp
 

Odd, I'm getting access denied.  I'm sure it will be fixed soon.

Best regards,

Kevin Potter 
k5vp


On Mon, Apr 12, 2021 at 2:20 PM David Ross <drossm@...> wrote:
JTAlert v2.50.0 : Download IS NOW AVAILABLE.

David VA3MJR

On 2021-04-12 5:04 p.m., Mike Flowers wrote:
Webpage says:  JTAlert v2.50.0 : File is being updated.

--


locked Re: File being updated? v2.50.0

HamApps Support (VK3AMA)
 

On 13/04/2021 7:04 am, Mike Flowers wrote:
Webpage says:  JTAlert v2.50.0 : File is being updated.

Fixed. Refresh your page.

de Laurie VK3AMA

3261 - 3280 of 36994