Date   

locked Sound files for JTAlert ver 2.16.17

Andy k3wyc
 

I recently updated JTAlert, callsign database, and sound files to the current versions.  I didn't like the announcement voice and I have made several attempts to use earlier sound file versions.  All attempts to change the sound files to an earlier version have failed.

Is it possible to choose what sound files version is used with JtAlert ver 2.16.17?  Is so, would someone please tell me how to do it.  Sound file versions 2.2.0, 2.5.0, 2.5.1, and 2.5.2 all install without error but all result in ver 2.5.3 being reported as installed and the voice does not change.

Thanks and 73,
Andy, k3wyc


locked Re: One issue and a couple of suggestions

Carl - WC4H
 

Hi Darryl.

I have the same problem with my 4k monitor.

I changed the resolution to 2560 x 1440 on my Windows and Raspberry Pi 4B.  That helped a lot.

Additionally, on Windows, you can change the Font Size used by Windows.  It might take a little playing around to get it to your taste but it helps a lot.

73.
Carl - WC4H


locked Re: New Computer Hookup Problem

Dave Garber
 

not without seeing the full setup

perhaps you virus program is blocking access to qrz??


Dave Garber
VE3WEJ / VE3IE


On Tue, Feb 16, 2021 at 3:48 PM W7JHR via groups.io <W7JHR=yahoo.com@groups.io> wrote:
Hi Dave,
I have put my correct QRZ login and password in.  Still no joy.  Any thoughts? Very frustrating, I know it’s just a matter getting the settings right.
Thanks,
Jim W7JHR


locked Re: New Computer Hookup Problem

W7JHR@...
 

Hi Dave,
I have put my correct QRZ login and password in.  Still no joy.  Any thoughts? Very frustrating, I know it’s just a matter getting the settings right.
Thanks,
Jim W7JHR


locked Re: New Computer Hookup Problem

Dave Garber
 

Jtalert requires qrz login .  check your user and password are entered and correct


On Mon., Feb. 15, 2021, 7:47 p.m. W7JHR via groups.io, <W7JHR=yahoo.com@groups.io> wrote:
I just changed computers and when I reloaded the WSJT-x and JTAlert software I noticed two changes.  One, the stations in the alert call window show their states but the dx calls don’t show the countries. Two, when I log the QSO to ACLog it only picks up part of the information.  In the past, it would log state, county, grid etc.  Any thoughts?

Thanks,
Jim W7JHR


locked New Computer Hookup Problem

W7JHR@...
 

I just changed computers and when I reloaded the WSJT-x and JTAlert software I noticed two changes.  One, the stations in the alert call window show their states but the dx calls don’t show the countries. Two, when I log the QSO to ACLog it only picks up part of the information.  In the past, it would log state, county, grid etc.  Any thoughts?

Thanks,
Jim W7JHR


locked Re: JTAlert Crash After Viewing Or Changing Settings

David - AK2L
 

Laurie,

After following the "new computer" procedure recommended by you, the problem continued to happen.  As a last resort, I removed JTAlert completely from my computer and did not try to restore previous settings.  I instead went through the various dialogs, changing only a few items at a time, then exiting and re-launching and so on.  The problem still happens.

I like JTAlert so much that I will live with it, but if I can help you diagnose the problem, let me know.  Before starting the last install, while exploring my computer, I did come across some dump files with JTAlert in the name.

AK2L


locked Re: Jtalert not fully updated

Michael Black
 

He needs to contact QRZ and see what's wrong.

I have a secondary callsign and a managed callsign and they both work with the xml query

But his secondary doesn't work even though it's a valid QRZ weg page just like my secondary callsign.



Mike W9MDB


On Monday, February 15, 2021, 12:25:26 AM CST, <asobel@...> wrote:


Lauri

 

4X1UF is a friend of mine. I did warn him about the problem. I did also QSO him many times just to check out if I am heard. What you see below is a QSO of this morning. What’s the connection to B4?

Please explain why the Name and QTH are not displayed.

Usually I regard a callsign that does not display name or QTH as a pirate or a WSJT-X phony call and check him on QRZ. Are there other cases of none display?

 

Amos 4X4MF

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of HamApps Support (VK3AMA)
Sent: Monday, February 15, 2021 7:48 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Jtalert not fully updated

 

On 15/02/2021 3:58 pm, asobel@... wrote:

Laurie

 

This is the problem:

Amos 4X4MF


That looks correct. What's the problem? If it is the lack of a Name & QTH, that would be due to those fields not containing data in the previous QSO in your Log (where the B4 is coming from). If it was a new QSO and not a B4, the result would be the same as the QRZ XML returns the following...

<QRZDatabase version="1.34" xmlns="http://xmldata.qrz.com">
<Session>
<Error>Not found: 4X1UF/QRP</Error>
<Count>50720</Count>
<SubExp>Thu Nov 11 00:00:00 2021</SubExp>
<GMTime>Mon Feb 15 05:39:58 2021</GMTime>
<Remark>cpu: 0.019s</Remark>
</Session>
</QRZDatabase>


Not much JTAlert can do if previous QSOs in your log or the XML lookup returns no data.

de Laurie VK3AMA


locked Re: Jtalert not fully updated

4X1UF Izzy Lavee
 

Different achievements, different awards and above all a challenge

בתאריך יום ב׳, 15 בפבר׳ 2021, 00:03, מאת Dave Garber ‏<ve3wej@...>:

I have seen several operator sign /qrp.   But if i work you. You are in my log without the qrp.   It matters not whether you are 20mw or 2k.   

Just wondering why it matters.    




On Sun., Feb. 14, 2021, 3:09 p.m. 4X1UF Izzy Lavee, <ham.4x1uf@...> wrote:
Hi
Got some complains that when I'm using 4X1UF/QRP  i do not appear as a valid callsign.
Can you please check ? This callsign is part of my main page at QRZ.com 4X1UF.

73

Izzy 4x1uf


locked Re: Jtalert not fully updated

asobel@...
 

Lauri

 

4X1UF is a friend of mine. I did warn him about the problem. I did also QSO him many times just to check out if I am heard. What you see below is a QSO of this morning. What’s the connection to B4?

Please explain why the Name and QTH are not displayed.

Usually I regard a callsign that does not display name or QTH as a pirate or a WSJT-X phony call and check him on QRZ. Are there other cases of none display?

 

Amos 4X4MF

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of HamApps Support (VK3AMA)
Sent: Monday, February 15, 2021 7:48 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Jtalert not fully updated

 

On 15/02/2021 3:58 pm, asobel@... wrote:

Laurie

 

This is the problem:

Amos 4X4MF


That looks correct. What's the problem? If it is the lack of a Name & QTH, that would be due to those fields not containing data in the previous QSO in your Log (where the B4 is coming from). If it was a new QSO and not a B4, the result would be the same as the QRZ XML returns the following...

<QRZDatabase version="1.34" xmlns="http://xmldata.qrz.com">
<Session>
<Error>Not found: 4X1UF/QRP</Error>
<Count>50720</Count>
<SubExp>Thu Nov 11 00:00:00 2021</SubExp>
<GMTime>Mon Feb 15 05:39:58 2021</GMTime>
<Remark>cpu: 0.019s</Remark>
</Session>
</QRZDatabase>


Not much JTAlert can do if previous QSOs in your log or the XML lookup returns no data.

de Laurie VK3AMA


locked Re: Jtalert not fully updated

HamApps Support (VK3AMA)
 

On 15/02/2021 3:58 pm, asobel@... wrote:

Laurie

 

This is the problem:

Amos 4X4MF


That looks correct. What's the problem? If it is the lack of a Name & QTH, that would be due to those fields not containing data in the previous QSO in your Log (where the B4 is coming from). If it was a new QSO and not a B4, the result would be the same as the QRZ XML returns the following...
<QRZDatabase version="1.34" xmlns="http://xmldata.qrz.com">
<Session>
<Error>Not found: 4X1UF/QRP</Error>
<Count>50720</Count>
<SubExp>Thu Nov 11 00:00:00 2021</SubExp>
<GMTime>Mon Feb 15 05:39:58 2021</GMTime>
<Remark>cpu: 0.019s</Remark>
</Session>
</QRZDatabase>


Not much JTAlert can do if previous QSOs in your log or the XML lookup returns no data.

de Laurie VK3AMA


locked Re: Jtalert not fully updated

Michael Black
 

I think if you add that callsign as a Managed call instead of a Secondary the QRZ query will work.
I just tested that and it seems to be the fix.

Mike W9MDB




On Sunday, February 14, 2021, 10:59:12 PM CST, asobel@... <asobel@...> wrote:


Laurie

 

This is the problem:

 

 

 

Amos 4X4MF

 

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of HamApps Support (VK3AMA)
Sent: Monday, February 15, 2021 12:36 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Jtalert not fully updated

 

On 15/02/2021 7:08 am, 4X1UF Izzy Lavee wrote:

Got some complains that when I'm using 4X1UF/QRP  i do not appear as a valid callsign.

Can you please check ? This callsign is part of my main page at QRZ.com 4X1UF.

 

73

 

Izzy 4x1uf


JTAlert correctly displays 4X1UF/QRP when it is decoded in WSJT-X.
From my tests...
   

Are the complaints coming from JTAlert users?

de Laurie VK3AMA


locked Re: Jtalert not fully updated

asobel@...
 

Laurie

 

This is the problem:

 

 

 

Amos 4X4MF

 

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of HamApps Support (VK3AMA)
Sent: Monday, February 15, 2021 12:36 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Jtalert not fully updated

 

On 15/02/2021 7:08 am, 4X1UF Izzy Lavee wrote:

Got some complains that when I'm using 4X1UF/QRP  i do not appear as a valid callsign.

Can you please check ? This callsign is part of my main page at QRZ.com 4X1UF.

 

73

 

Izzy 4x1uf


JTAlert correctly displays 4X1UF/QRP when it is decoded in WSJT-X.
From my tests...
   

Are the complaints coming from JTAlert users?

de Laurie VK3AMA


locked Re: One issue and a couple of suggestions

HamApps Support (VK3AMA)
 

On 15/02/2021 6:08 am, Darryl Wagoner wrote:
Feature request:

Being able to increase font size.  I have a 4k monitor and the CQ special characters are hard to see.

Great app by the way

Darryl DE WA1GON

Is the Callsign display also very small? If so see the Help File, "Troubleshooting -> Very small callsign display font" topic.

If it is not a problem with font-scaling as referenced in the Help file, try enabling the Callsign CQ border display under teh "Alerts -> CQ" section of teh Settings window. Try setting a different color for the  directed CQ compared to the normal CQ. In my case I have the directed CQ set to purple so it stands out.

de Laurie VK3AMA


locked Re: Jtalert not fully updated

HamApps Support (VK3AMA)
 

On 15/02/2021 7:08 am, 4X1UF Izzy Lavee wrote:
Got some complains that when I'm using 4X1UF/QRP  i do not appear as a valid callsign.
Can you please check ? This callsign is part of my main page at QRZ.com 4X1UF.

73

Izzy 4x1uf

JTAlert correctly displays 4X1UF/QRP when it is decoded in WSJT-X.
From my tests...
   

Are the complaints coming from JTAlert users?

de Laurie VK3AMA


locked Re: Jtalert not fully updated

Dave Garber
 

I have seen several operator sign /qrp.   But if i work you. You are in my log without the qrp.   It matters not whether you are 20mw or 2k.   

Just wondering why it matters.    




On Sun., Feb. 14, 2021, 3:09 p.m. 4X1UF Izzy Lavee, <ham.4x1uf@...> wrote:
Hi
Got some complains that when I'm using 4X1UF/QRP  i do not appear as a valid callsign.
Can you please check ? This callsign is part of my main page at QRZ.com 4X1UF.

73

Izzy 4x1uf


locked Jtalert not fully updated

4X1UF Izzy Lavee
 

Hi
Got some complains that when I'm using 4X1UF/QRP  i do not appear as a valid callsign.
Can you please check ? This callsign is part of my main page at QRZ.com 4X1UF.

73

Izzy 4x1uf


locked One issue and a couple of suggestions

Darryl Wagoner
 

The issue:

Logging to AC sometimes fails for no apparent reason.  

Feature request:

Being able to increase font size.  I have a 4k monitor and the CQ special characters are hard to see.

Great app by the way

Darryl DE WA1GON


locked Re: V2.16.17 crashes after logging in HRD 6.7.0.323

DM1TS Torsten
 

Hi Laurie,
I have experimented a lot and in the end just started from scratch: new hard disk in the PC, fresh Windows up to the current patch level 20H2 on it, all drivers for the hardware new and then first a fresh SmartSDR for the Flex, a new WSJT-X, a fresh HRD and also a fresh JTAlert in the respective latest versions. After that I did not restore the existing settings of the old system, but set everything new. Only the HRD logbook and the all.txt and the wsjtx_log.adi I have imported.
After that it worked in principle again, JTAlert no longer crashes abruptly and without message. Remaining is a problem in the interaction between WSJT-X and JTAlert, but I describe that in a separate mail.

73 de Torsten
DM1TS, JO61OB

Am 05.02.2021 um 22:11 schrieb Laurie, VK3AMA:

On 6/02/2021 5:20 am, DM1TS Torsten wrote:
Hi,
I had to do a complete change of my HAM software to a new PC. This worked well thanks to the backup options. Here runs now WSJT-X in V2.3.0, in addition JTALERT in V2.16.17 and HRD in V6.7.0.323.
As soon as I have made a QSO in WSJT-X the log window pops up and I confirm the log entry. HRD reports immediately afterwards that the QSO is also there in the log, I see the entry also immediately. At this moment JTALERT terminates without warning or indication of an error. This happens after every QSO. In the event log of Windows I find the following information:

-- snip --

Is there any idea for this, unfortunately I can't work anymore.

73 de Torsten
DM1TS, JO61OB
It is unlikely to be JTAlert 2.16.17, which is quite stable, released late last year with no similar reports. JTAlert will typically show an error window when there is a critical failure. Since it is quietly closing, I am suspicious that your PC protection software may be interfering, what do you use?
Try downgrading JTAlert to an earlier version, try 2.16.16 or 2.16.15. Both are available on the JTAlert download page @ https://hamapps.com/JTAlert/
Just run the setup, no need to uninstall first. Your configuration is safe and will not be altered or deleted.
de Laurie VK3AMA


locked Re: WSJT-X v2.4.0-rc1 Q65

William Thomas
 

Thanks Laurie, I never doubted that Q65 would be supported. 

73 Bill WT0DX

3121 - 3140 of 36204