|
locked
Re: Callsign Database Question
Joe WB9SBD
Is there any reader for those
files other than notepad, that makes them easier to read
through?
toggle quoted messageShow quoted text
Joe WB9SBD
On 6/9/2020 11:55 PM, HamApps Support
(VK3AMA) wrote:
|
|
|
|
locked
Re: JT Alert new install
Michael Black
Did you turn on the UDP Server boxes in the Reporting tab? Mike W9MDB
On Wednesday, June 10, 2020, 01:44:43 AM CDT, wazzan1@... <wazzan1@...> wrote:
hi all, just installed JT Alert [ for use with JTDX] and had the attached message. Anyone have any idea how to fix this regards Wayne VK4WTN
|
|
|
|
locked
Re: JT Alert new install
neil_zampella
Going to ask the obvious questions: 1. Did you install JT-Alert by setting the setup to "run as administrator"? 2. Did you check to see if your antivirus has quarantined any JT-Alert files? 3. Did anything else change on your system? There is a Windows update out. Neil, KN3ILZ
|
|
|
|
locked
Re: download ver 2.16.6
neil_zampella
What antivirus are you using? It has happened previously that some antivirus programs will quarantine program DLLs and not notify the user. I would make sure you have the HAMLIB directory excluded from scans or, if your antivirus has the capability, to notify you before it tries to 'help' you. Once you do that, run the JT-Alert setup again. I suspect your problem will have been fixed. Neil, KN3ILZ
|
|
|
|
locked
Re: JTAlert 2.16.7 not logging Country field in HRD
#HRD
David De Coons
Too many typos in my first post. Moral of the story, don’t use the phone to type 😊
Dave wo2x
From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of Alfred Reeves
Sent: Wednesday, June 10, 2020 6:41 AM To: Support@HamApps.groups.io Subject: Re: [HamApps] JTAlert 2.16.7 not logging Country field in HRD #HRD
Great point Dave.. I have found the same issue with many hams that I have helped to solve problems.. On 6/10/2020 6:29 AM, David De Coons wrote:
|
|
|
|
locked
Re: JTAlert 2.16.7 not logging Country field in HRD
#HRD
Alfred Reeves
Great point Dave.. I have found the same issue
with many hams that I have helped to solve problems..
toggle quoted messageShow quoted text
Al W1JHU
On 6/10/2020 6:29 AM, David De Coons
wrote:
I am running HRD 6.7.277, JTAlert 2.16.7, and WSJT-X.
|
|
|
|
locked
Re: JTAlert 2.16.7 not logging Country field in HRD
#HRD
David De Coons
I am running HRD 6.7.277, JTAlert 2.16.7, and WSJT-X.
toggle quoted messageShow quoted text
Country logging is working. Also 100% of the QSOs are logged. I help friends set this up and when I see the intermittent logging it is almost always due to the computer ewsources (CPU/RAM) being insufficient. I had one person trying to run everything on a 10 year old Fujitsi tablet with 4 GB ram. The OS was accessing the swap file so much everything would freezes every few minutes. Another friend was using a USB to HDMI adapter on his laptop to drive a 42” TV as a monitor. There wasn’t enough data throuput for the video. In most cases once hardware upgrades were performed the amount ofbdecodes permcycle went up substantially. On 20 meters yhe last few days i am getting over 36 decodes on many cycles. First thing to check is CPU. Anything over peaks of 60% usage consistently should be considered for an upgrade. Second is RAM, minimum of 8 GB is needed to accompdate the OS and programs. For those having issues with HRD, the latest version as of this writing is 6.7.277, not 275. Also check your cpu and ram usage in Task Manager. Hit CTRT-ALT-DEL and choose Task Manager. Also try turning off the color notifications and see if it maes a difference in intermittent logging. Dave wo2x
On Jun 10, 2020, at 2:46 AM, HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:
|
|
|
|
locked
Re: JTAlert 2.16.7 is available
Carlos Reboreda <ea1dwi@...>
Hi Barry, thank you very much for the answer, I really appreciate it. I can’t even send the file to ESET, as the antivirus stops the download, so the file never came complete to my HD.
I admire Lauries work and I trust on the professional protocols he use. It isn’t about that, it’s just about my own protocols. As a matter of fact, I feel I shouldn’t bring this opinions to the list, as they don’t help much.
Yesterday I was in the elevator and I neighbour came into the elevator, when the door was almost closed. He was without a mask on and he said: Ooops, sorry, relax, I am free of virus, I did a test weeks ago, he said. Well, I stopped the elevator on the first flat and I took the stairs. -wink-
Laurie, your software is great and you wrote already your name n the history of Ham Radio, like many others as K1EA, HB9DRV, etc, did. This problem I have with the download is just “my problem”, not your problem.
Happy week to all…
Carlos EA1DWI
Enviado desde Correo para Windows 10
De: Barry Murrell ZS2EZ
Hi Carlos
You need to submit a report to ESET to verify the file is clear – they will then whitelist it in their next definition update. You will then be able to update in a day or two.
I use ESET Internet Security, but was happy to pause mine for 10 minutes – I trust Laurie’s checking process before he posts a file for download…. This is now the second time in a row ESET has flagged JTAlert – I submitted the last one, didn’t bother this time. Likely to happen next time too…
I generally don’t like pausing my protection – but in this case I know that Laurie is very thorough with checking process and trust his software (and the HamApps site).
73 de BARRY MURRELL ZS2EZ KF26ta - Port Elizabeth, South Africa EPC#0558 DMC#1690 30MDG#4081 DXCC HONOR ROLL (332/340) DXCC(mixed)#41,146 DXCC(RTTY)#1,916 DXCC(phone)#34,990 DXCC(CW)#11,714 DXCC 80m,40m,30m,20m,17m,15m,12m,10m 5BDXCC#8,916 WAS Triple Play #492 WAS(RTTY)#538 WAS(Digital)#163-Endorsements JT65,FT8 WAZ(RTTY)#185 WAE-I(mixed)#72 WAZS(mixed)#214 AAA#1569 AS ZR6DXB: VUCC(50MHZ)#1,334 UKSMG WAE(Silver)#75 UKSMG AFRICA#22 WAC (Satellite) website : www.zs2ez.co.za
From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of Carlos Reboreda
Sent: Tuesday, 09 June 2020 18:30 To: Support@hamapps.groups.io Subject: Re: [HamApps] JTAlert 2.16.7 is available
Hi Neil,
Turning off the antivirus? Bad deal, in my opinión. I trust n my antivirus.. not a single virus in my PC since I installed it, many years ago. I download a lot of files and never had this experience, so I just want to know what the developer says, if he has anything to say about it. I trust on JTalert and so do I with my ESET antivirus.
73s Carlos EA1DWI
De: neil_zampella
The file is safe ..
TURN OFF your antivirus, download the file, mark the file and the hamapps directory AS SAFE in your antivirus exemption list, install the update. Turn the antivirus back on.
Neil, KN3ILZ
Hasan .. Defender doesn't suck .. but its written so that low usage programs (most ham applications) seem to be most affected by it.
|
|
|
|
locked
Re: JTAlert 2.16.7 is available
Barry Murrell ZS2EZ
Hi Carlos
You need to submit a report to ESET to verify the file is clear – they will then whitelist it in their next definition update. You will then be able to update in a day or two.
I use ESET Internet Security, but was happy to pause mine for 10 minutes – I trust Laurie’s checking process before he posts a file for download…. This is now the second time in a row ESET has flagged JTAlert – I submitted the last one, didn’t bother this time. Likely to happen next time too…
I generally don’t like pausing my protection – but in this case I know that Laurie is very thorough with checking process and trust his software (and the HamApps site).
73 de BARRY MURRELL ZS2EZ KF26ta - Port Elizabeth, South Africa EPC#0558 DMC#1690 30MDG#4081 DXCC HONOR ROLL (332/340) DXCC(mixed)#41,146 DXCC(RTTY)#1,916 DXCC(phone)#34,990 DXCC(CW)#11,714 DXCC 80m,40m,30m,20m,17m,15m,12m,10m 5BDXCC#8,916 WAS Triple Play #492 WAS(RTTY)#538 WAS(Digital)#163-Endorsements JT65,FT8 WAZ(RTTY)#185 WAE-I(mixed)#72 WAZS(mixed)#214 AAA#1569 AS ZR6DXB: VUCC(50MHZ)#1,334 UKSMG WAE(Silver)#75 UKSMG AFRICA#22 WAC (Satellite) website : www.zs2ez.co.za
From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of Carlos Reboreda
Sent: Tuesday, 09 June 2020 18:30 To: Support@hamapps.groups.io Subject: Re: [HamApps] JTAlert 2.16.7 is available
Hi Neil,
Turning off the antivirus? Bad deal, in my opinión. I trust n my antivirus.. not a single virus in my PC since I installed it, many years ago. I download a lot of files and never had this experience, so I just want to know what the developer says, if he has anything to say about it. I trust on JTalert and so do I with my ESET antivirus.
73s Carlos EA1DWI
De: neil_zampella
The file is safe ..
TURN OFF your antivirus, download the file, mark the file and the hamapps directory AS SAFE in your antivirus exemption list, install the update. Turn the antivirus back on.
Neil, KN3ILZ
Hasan .. Defender doesn't suck .. but its written so that low usage programs (most ham applications) seem to be most affected by it.
|
|
|
|
locked
Re: JTAlert 2.16.7 not logging Country field in HRD
#HRD
HamApps Support (VK3AMA)
On 10/06/2020 4:25 pm, Kyle K7KE wrote:
I am using the latest versions of HRD and JTAlert. JTAlert is set to log to HRD, the latest version. But randomly JTAlert fails to log some QSOs to HRD. Then some QSOs will be logged. Then some will not. As a test, when I run GridTracker (for an extended period of time) instead of JTAlert, all QSOs are logged. I am baffled. I prefer JTAlert to GT, but can't figure out why some QSOs are not logged.Kyle, What version of WSJT-X or is it JTDX? Please quote the actual version number, not "the latest". Thanks de Laurie VK3AMA
|
|
|
|
locked
JT Alert new install
wazzan1@...
hi all, just installed JT Alert [ for use with JTDX] and had the attached message. Anyone have any idea how to fix this
regards Wayne VK4WTN
|
|
|
|
locked
Re: JTAlert 2.16.7 not logging Country field in HRD
#HRD
HamApps Support (VK3AMA)
On 10/06/2020 4:25 pm, Kyle K7KE wrote:
I am using the latest versions of HRD and JTAlert. JTAlert is set to log to HRD, the latest version. But randomly JTAlert fails to log some QSOs to HRD. Then some QSOs will be logged. Then some will not. As a test, when I run GridTracker (for an extended period of time) instead of JTAlert, all QSOs are logged. I am baffled. I prefer JTAlert to GT, but can't figure out why some QSOs are not logged.Kyle, How long ago was the last failed upload? If it has only been a few days, there will likley be something in the JTAlert session files. Please use the "Help" (or "? ") -> "Contact Support" menu, on the main JTAlert window, to send me your JTAlert files for analysis. Pleas include a note of the last Callsign that failed to upload. de Laurie VK3AMA
|
|
|
|
locked
Re: JTAlert 2.16.7 not logging Country field in HRD
#HRD
Kyle K7KE
I am using the latest versions of HRD and JTAlert. JTAlert is set to log to HRD, the latest version. But randomly JTAlert fails to log some QSOs to HRD. Then some QSOs will be logged. Then some will not. As a test, when I run GridTracker (for an extended period of time) instead of JTAlert, all QSOs are logged. I am baffled. I prefer JTAlert to GT, but can't figure out why some QSOs are not logged.
Kyle K7KE
|
|
|
|
locked
Re: JTAlert 2.16.7 is available
Carlos Reboreda <ea1dwi@...>
Hi again, Nei…
I know that I can turn off my antivirus whenever I want, but it isn’t my choice. I don’t mean the file isn’t safe neither, BUT, I prefer to wait to the next downloadable (by me) beta and follow my instinct.
I hope you all enjoy the new beta and help Laurie to develope the JTA the more, the best. I will, as soon as I can download it under my criteria.
Hope all of you, and all of yours, are safe and healthy these days. All great here, thanks God
73s Carlos EA1DWI
Enviado desde Correo para Windows 10
De: neil_zampella
You're only turning it off in order to be able to download the file from a known SAFE site. You then add the HAMAPPS directory to your SAFE exemptions on your antivirus, and turn it back on. Neil, KN3ILZ
On Tue, Jun 9, 2020 at 12:30 PM, Carlos Reboreda wrote:
|
|
|
|
locked
Re: JTAlert 2.16.7 not logging Country field in HRD
#HRD
HamApps Support (VK3AMA)
On 10/06/2020 2:45 pm, Roger M via
groups.io wrote:
I just installed JTAlert version 2.16.7. When did you last update HRD? Nothing has changed in JTAlert with respect to HRD logging since the changes of 2.16.4 needed to accommodate the HRD 6.7.0.269 FT4 changes. JTAlert will only send DXCC number and Country Name in the HRD logging command if the DXCC is > 0, that is for a valid DXCC Country. Is JTAlert showing country data in its log field area prior to logging, if so that should be getting sent to HRD. Sorry, I am unable to test HRD logging, I don't own a copy. Perhaps one of the group members who runs HRD will chime in with their observations. de Laurie VK3AMA
|
|
|
|
locked
Re: Callsign Database Question
HamApps Support (VK3AMA)
The old, still browseable, but now obsolete, download page is at https://wireless.fcc.gov/uls/data/complete/
de Laurie VK3AMA
|
|
|
|
locked
Re: Callsign Database Question
HamApps Support (VK3AMA)
On 10/06/2020 2:27 pm, Michael Black
via groups.io wrote:
They changed the download url from https: to ftp: but didn't take down the old https: address or redirect. de Laurie VK3AMA
|
|
|
|
locked
JTAlert 2.16.7 not logging Country field in HRD
#HRD
Roger M
Hi,
I just installed JTAlert version 2.16.7. After installing, it no longer logs the Country field in HRD. The Country field displays [None] in HRD. I have QRZ XML Lookup enabled in JTalert, and my account is valid. I am running HRD version 6.7.0.275. This all worked fine with the previous version of JTAlert, 2.16.6 Thanks in advance, Roger AC6BW
|
|
|
|
locked
Re: Callsign Database Question
HamApps Support (VK3AMA)
On 10/06/2020 2:09 pm, HamApps Support
(VK3AMA) via groups.io wrote:
Either they have changed the location of the database dump file and I am downloading an old version or they are no longer updating the file (pandemic restrictions perhaps).FYI, I found the problem. The FCC has changed the location of the daily and weekly files. The old https: address still works and can be browsed but all the images are broken and only delivers files last updated in March. The new files are now hosted at an ftp: address. de Laurie VK3AMA
|
|
|
|
locked
Re: Callsign Database Question
Michael Black
I just checked here And the files are dated 2020-06-07 and WI9D is now in Wisconsin EN.dat:EN|2716963|||WI9D|L|L00870765|HANSEN, RANDALL L|RANDALL|L|HANSEN|||||318 E 9th St|Westfield|WI|53964|||000|0011002607|I|||
On Tuesday, June 9, 2020, 11:09:18 PM CDT, HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:
On 10/06/2020 12:53 pm, JT Croteau
wrote:
Thanks for the reply. I double checked before posting and the FCC website showed WI. I'm fact, I just checked the website again and it is still showing WI. Very strange. I'm going to have to email the OP.OM, Your observation prompted me to look closer at what I am getting from the FCC. Either they have changed the location of the database dump file and I am downloading an old version or they are no longer updating the file (pandemic restrictions perhaps). The files listed in the zip file are all dated 2020-3-02, March 2nd for the file downloaded June 8th. If the Callsign in question updated their FCC address from AZ to WI after that date, then JTAlert would not know about it due to these out-of-date file. I'll investigate. de Laurie VK3AMA
|
|
|
