Date   

locked Re: JTAlert 2.16.7 is available

Jacques Corbu
 

HI Charlie
yes tried all these things in the end downloaded from my work portable same configuration as shack dedicated  computer win 10 pro avast etc and it download it and transfered  to shack computer that worked  go figure ? 

Thanks Jacques F1VEV


locked Re: JTAlert 2.16.7 is available

jushamn@...
 

Same problem.


locked Re: JTAlert 2.16.7 is available

neil_zampella
 

The file is safe ..

 

TURN OFF your antivirus, download the file, mark the file and the hamapps directory AS SAFE in your antivirus exemption list, install the update.  Turn the antivirus back on.

 

Neil, KN3ILZ

 

Hasan .. Defender doesn't suck .. but its written so that low usage programs (most ham applications) seem to be most affected by it.


locked ESET Internet Security stops install of JTalert

Frank C. D'Amato
 

Here are my exclusions in ESET to get JTalert to install.


My ESET LOG





Web Access Protection Settings


Real Time Protection Settings


locked Re: JTalert and 2m imported ADIF log does not rebuild - 4m GREEN and CANCEL in REBUILD

Franco
 
Edited

On Tue, Jun 9, 2020 at 06:04 AM, Franco HB9oab wrote:
1. I can't make the rebuild understand the vision of the fields in 2m.
I use an imported ADIF LOG, on all bands it works but not in 2m, I tried with BAND and FREQ but it is always zero on all fields even if I have enabled 2m (see images)

Solution:
I solved for the 2m ...
1. I have things not quite the same as my ADIF log, but it is still calculated on 2m, I will check if it complies with the QSOs. My config error...

2. For the 4m I have disabled and it no longer calculates it.

3. For the CANCEL key during REBUILD I have no solution ...

Thanks for help
73
Franco, HB9oab
http://qrz.com/db/hb9oab


locked Re: Special callsigns

WB8ASI Herb
 

Take a look at the JTA Decodes window.  I use it all the time because I can scan everything vertically much faster, and you can fine tune any filtering you desire.  Try it and I think you'll like it.  73 Herb WB8ASI


locked Re: JTAlert 2.16.7 is available

Frank C. D'Amato
 

I'm in the same boat with ESET Internet Security.  Unable to get JTALERT installed


locked JTalert and 2m imported ADIF log does not rebuild - 4m GREEN and CANCEL in REBUILD

Franco
 

Hi Laurie
I'm having some problems with REBUILD which I don't know if it's my problem and what I need to configure.

There are three working problems on the ADIF LOG:

1. I can't make the rebuild understand the vision of the fields in 2m.
I use an imported ADIF LOG, on all bands it works but not in 2m, I tried with BAND and FREQ but it is always zero on all fields even if I have enabled 2m (see images)

2. the 4m field is always green (I have no QSO in the 4m band), even after more rebuilds it is still green as if there were "new" 

3. during the rebuild the CANCEL key remains active, if I press it, at the end of the analysis it asks me whether to exit or continue. If I EXIT LOG SCAN, it only exits the table it is doing but continues anyway, resetting everything and putting the table in green as if there were "new"



I can't correct these and I don't know if I'm wrong somewhere in my configuration.

Thanks for help
73
Franco, HB9oab
http://qrz.com/db/hb9oab

 


locked Re: JTAlert stops updating for about 2 minutes

John Singler
 

Windows Defender and I already put the WSJT-X, JTAlert, and HRD data and program directories on the exception list
John S


locked Re: JTAlert 2.16.7 is available

Hasan Schiers N0AN
 

Further hints: For Defender 
...and spare us the "Defender sucks" comments.  This is advice for those who run Defender and are staying with it.

On another machine Chrome blocked it but allowed me to let it continue after I read the warning at the file download window.

If you can't get the file to download at all:

(Do this ONLY if you are confident that the file is safe) Any file from Laurie is SAFE as far as I am concerned)

Virus & Threat Protection > Manage Settings > 

1. Turn Real-time protection OFF
2. Turn Cloud-delivered OFF
3. Turn Automatic sample submission OFF
4. Turn Tamper Protection OFF

(Do this ONLY if you are confident that the file is safe) Any file from Laurie is SAFE as far as I am concerned)

Download the file

Then turn all of the above back ON
73, N0AN
Hasan


On Tue, Jun 9, 2020 at 5:51 AM Hasan Schiers N0AN via groups.io <hbasri.schiers6=gmail.com@groups.io> wrote:
2.16.7 Downloaded and Installed without any issues with Win10Pro and Windows Defender, as long as

1. Windows Defender is Up to Date and...
 
2. Proper exclusions were set up ahead of time (and they have been for months)

Running just fine on two different machines.

73, N0AN
Hasan


On Tue, Jun 9, 2020 at 3:51 AM <dk1wb@...> wrote:
Laurie,
Windows Defender warned that Trojan:Win32/Azden.A!cl was found in
x86)\HamApps\JTAlert\plugins\JTAlertSettings.exe and deleted it.
Please confirm.
73,
Hans, DK1WB

Carlos Reboreda schrieb am 09.06.2020 10:18 (GMT +02:00):

Hi all,

 

My experience here is the same… when there are abt 100 Kb left to finish the download, the ESET (for the first time) cancels the download, because it has detected something dangerous on dnl.hamapps.com … I’m not saying that this is the real matter, I just describe what ESET is doing about this download. I’m user of this antivirus for more tan 15 years, every euro i pay every

year for it is worth it. I tried the download with Opera, Edge and Chrome, so I think it isn’t a matter of the web browser you use. Lets see if there any other members experimenting the same

problem or it happens to be a false detection.

 

73 to all!

 

Carlos R.

EA1DWI

 

Enviado desde Correo para Windows 10

 

De: chas cartmel
Enviado: martes, 9 de junio de 2020 9:50
Para: Support@hamapps.groups.io
Asunto: Re: [HamApps] JTAlert 2.16.7 is available

 

Jacques

08:48 BST – all OK here in the UK.
Have you tries a different browser? Occasionally this works for me if I have a ‘glitch’.

73 Charlie

G4EST

www.g4est.me.uk

 

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of Jacques Corbu
Sent: 09 June 2020 07:09
To: Support@HamApps.groups.io
Subject: [HamApps] JTAlert 2.16.7 is available

 

HI Laurie

cannot access new version the website is given as non accessible when I hit download ?  I have never had this issue and it has all the exception requires in avast etc  but this come up 

any idea would be welcomed 

stay safe Jacques F1VEV

 

This email has been scanned by BullGuard antivirus protection.

For more info visit www.bullguard.com

 

 


locked Re: JTAlert 2.16.7 is available

Hasan Schiers N0AN
 

2.16.7 Downloaded and Installed without any issues with Win10Pro and Windows Defender, as long as

1. Windows Defender is Up to Date and...
 
2. Proper exclusions were set up ahead of time (and they have been for months)

Running just fine on two different machines.

73, N0AN
Hasan


On Tue, Jun 9, 2020 at 3:51 AM <dk1wb@...> wrote:
Laurie,
Windows Defender warned that Trojan:Win32/Azden.A!cl was found in
x86)\HamApps\JTAlert\plugins\JTAlertSettings.exe and deleted it.
Please confirm.
73,
Hans, DK1WB

Carlos Reboreda schrieb am 09.06.2020 10:18 (GMT +02:00):

Hi all,

 

My experience here is the same… when there are abt 100 Kb left to finish the download, the ESET (for the first time) cancels the download, because it has detected something dangerous on dnl.hamapps.com … I’m not saying that this is the real matter, I just describe what ESET is doing about this download. I’m user of this antivirus for more tan 15 years, every euro i pay every

year for it is worth it. I tried the download with Opera, Edge and Chrome, so I think it isn’t a matter of the web browser you use. Lets see if there any other members experimenting the same

problem or it happens to be a false detection.

 

73 to all!

 

Carlos R.

EA1DWI

 

Enviado desde Correo para Windows 10

 

De: chas cartmel
Enviado: martes, 9 de junio de 2020 9:50
Para: Support@hamapps.groups.io
Asunto: Re: [HamApps] JTAlert 2.16.7 is available

 

Jacques

08:48 BST – all OK here in the UK.
Have you tries a different browser? Occasionally this works for me if I have a ‘glitch’.

73 Charlie

G4EST

www.g4est.me.uk

 

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of Jacques Corbu
Sent: 09 June 2020 07:09
To: Support@HamApps.groups.io
Subject: [HamApps] JTAlert 2.16.7 is available

 

HI Laurie

cannot access new version the website is given as non accessible when I hit download ?  I have never had this issue and it has all the exception requires in avast etc  but this come up 

any idea would be welcomed 

stay safe Jacques F1VEV

 

This email has been scanned by BullGuard antivirus protection.

For more info visit www.bullguard.com

 

 


locked Re: JTAlert 2.16.7 is available

dk1wb@...
 

Laurie,
Windows Defender warned that Trojan:Win32/Azden.A!cl was found in
x86)\HamApps\JTAlert\plugins\JTAlertSettings.exe and deleted it.
Please confirm.
73,
Hans, DK1WB

Carlos Reboreda schrieb am 09.06.2020 10:18 (GMT +02:00):

Hi all,

 

My experience here is the same… when there are abt 100 Kb left to finish the download, the ESET (for the first time) cancels the download, because it has detected something dangerous on dnl.hamapps.com … I’m not saying that this is the real matter, I just describe what ESET is doing about this download. I’m user of this antivirus for more tan 15 years, every euro i pay every

year for it is worth it. I tried the download with Opera, Edge and Chrome, so I think it isn’t a matter of the web browser you use. Lets see if there any other members experimenting the same

problem or it happens to be a false detection.

 

73 to all!

 

Carlos R.

EA1DWI

 

Enviado desde Correo para Windows 10

 

De: chas cartmel
Enviado: martes, 9 de junio de 2020 9:50
Para: Support@hamapps.groups.io
Asunto: Re: [HamApps] JTAlert 2.16.7 is available

 

Jacques

08:48 BST – all OK here in the UK.
Have you tries a different browser? Occasionally this works for me if I have a ‘glitch’.

73 Charlie

G4EST

www.g4est.me.uk

 

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of Jacques Corbu
Sent: 09 June 2020 07:09
To: Support@HamApps.groups.io
Subject: [HamApps] JTAlert 2.16.7 is available

 

HI Laurie

cannot access new version the website is given as non accessible when I hit download ?  I have never had this issue and it has all the exception requires in avast etc  but this come up 

any idea would be welcomed 

stay safe Jacques F1VEV

 

This email has been scanned by BullGuard antivirus protection.

For more info visit www.bullguard.com

 

 


locked Re: JTAlert 2.16.7 is available

Carlos Reboreda
 

Hi all,

 

My experience here is the same… when there are abt 100 Kb left to finish the download, the ESET (for the first time) cancels the download, because it has detected something dangerous on dnl.hamapps.com … I’m not saying that this is the real matter, I just describe what ESET is doing about this download. I’m user of this antivirus for more tan 15 years, every euro i pay every

year for it is worth it. I tried the download with Opera, Edge and Chrome, so I think it isn’t a matter of the web browser you use. Lets see if there any other members experimenting the same

problem or it happens to be a false detection.

 

73 to all!

 

Carlos R.

EA1DWI

 

Enviado desde Correo para Windows 10

 

De: chas cartmel
Enviado: martes, 9 de junio de 2020 9:50
Para: Support@hamapps.groups.io
Asunto: Re: [HamApps] JTAlert 2.16.7 is available

 

Jacques

08:48 BST – all OK here in the UK.
Have you tries a different browser? Occasionally this works for me if I have a ‘glitch’.

73 Charlie

G4EST

www.g4est.me.uk

 

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of Jacques Corbu
Sent: 09 June 2020 07:09
To: Support@HamApps.groups.io
Subject: [HamApps] JTAlert 2.16.7 is available

 

HI Laurie

cannot access new version the website is given as non accessible when I hit download ?  I have never had this issue and it has all the exception requires in avast etc  but this come up 

any idea would be welcomed 

stay safe Jacques F1VEV

 

This email has been scanned by BullGuard antivirus protection.

For more info visit www.bullguard.com

 


locked Re: JTAlert 2.16.7 is available

chas cartmel
 

Jacques

08:48 BST – all OK here in the UK.
Have you tries a different browser? Occasionally this works for me if I have a ‘glitch’.


73 Charlie

G4EST

www.g4est.me.uk

 

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of Jacques Corbu
Sent: 09 June 2020 07:09
To: Support@HamApps.groups.io
Subject: [HamApps] JTAlert 2.16.7 is available

 

HI Laurie

cannot access new version the website is given as non accessible when I hit download ?  I have never had this issue and it has all the exception requires in avast etc  but this come up 

any idea would be welcomed 

stay safe Jacques F1VEV


This email has been scanned by BullGuard antivirus protection.
For more info visit www.bullguard.com


locked JTAlert 2.16.7 is available. WSJT-X 2.2.x fix + new features. #NewRelease #Announcement

HamApps Support (VK3AMA)
 

The latest JTAlert version 2.16.7 is now available @ https://hamapps.com/JTAlert/
 

Please see the release notes below.

de Laurie VK3AMA

Release Notes:

2.16.7 (09-Jun-2020)

  *** Includes Callsign database file version 2020-06-08 (2020-Jun-08)

  New Features:

    - 4m Band Alerting: All the Wanted Alerts, Scan Log, QSO History & Bands
       Confirmed display now support the 4m band.

    - Multiple Grids per QSO Logs: Logs that support recording multiple grids
       (1,2 or 4) are now supported by the Scan Log & Rebuild operation for
       updating the internal "Wanted Grid" lists and the Worked B4 checks.
       Currently only DXKeeper and standard ADIF logs are supported.

    - WSJT-X decode highlighting: The grid in a decode is now only colored if
       a Wanted Grid Alert is generated using the Grid Alert colors.

  Changes:

    - WSJT-X decode highlighting: Only the "CQ Callsign" in a CQ decode is
       colored, previously the entire decode "CQ Callsign Grid" was colored.

    - WSJT-X decode highlighting: For non-CQ decodes, only the DX Callsign is
       Coloured, previously the exchange part of the decode (eg, report, grid,
       RR73, etc) was also colored.

  Fixes:

    - WSJT-X 2.2.x FT8: Random loss of some early first-pass FT8 decodes received
       at the 11 second point of the Rx period.



locked Re: needed grids not updating once needed one worked

Jim Cary
 

Thanks.
73, Jim


locked Re: needed grids not updating once needed one worked

Larry Banks
 

Hi Jim,
 
Same as DXCC or WAS, the scan is required.

73 -- Larry -- W1DYJ

 

From: Jim Cary
Sent: Monday, June 08, 2020 13:27
Subject: [HamApps] needed grids not updating once needed one worked
 
When I work a needed grid, the needed list is not being updated and the grid still shows as needed.  The only way I can get it to update is to do a complete log scan.  What am I doing wrong?

Jim
W2SM


locked needed grids not updating once needed one worked

Jim Cary
 

When I work a needed grid, the needed list is not being updated and the grid still shows as needed.  The only way I can get it to update is to do a complete log scan.  What am I doing wrong?

Jim
W2SM


locked Re: Using WSJT-X, JTAlert and MacLoggerDX together nicely

Jay
 

That was the work around.  I keep changing the entry in "Logging" for retransmission and the evidently only works on 127.0.0.1.  Never saw the WSJT-X/JTDX entry.

Thanks

jb  N4NQY


locked Re: JTAlert stops updating for about 2 minutes

Michael Black
 

What antivirus are you using?  

Mike W9MDB




On Monday, June 8, 2020, 10:26:38 AM CDT, John Singler <jes148@...> wrote:


I've been trying to solve this for a couple of months and run out of ideas. JTAlert runs fine for minutes to hours and then stops updating call signs. If I mouse over the form, I get an hourglass. The form shrinks a bit (but not the displayed call signs) and the top margin text gets pale. After about 90 seconds the top margin text gets dark again, usually with a Not Responding message,  and after about 2 minutes most or all the call signs decoded while the display is off get written. While all this is annoying, the thing that will eventually bite me is that if I log a QSO while JTAlert is stopped, when it comes back I  get a QSO not logged message - QSO and DX Call call signs don't match.
First thing I did was follow Mike Black's guidance and put the program and data directories for WSJT-X, JTAlert and HRD5 (my logger) on the Windows Defender exception list. JTAlert stops even it it has been minutes to hours since my last transmission and WSJT-X and CAT control are not impacted so I don't see how it can be RFI (but I did put an RFI suppression kit on anyway). . I've checked the CPU load with Performance Monitor and it is 12% to 25%. There was often a spike in HDD activity just before JTAlert stopped but not while it is stopped and that was usually WSJT-X writing a .wav file. WSJT-X doesn't do that any more and JTAlert still stops. I saw message 29770 about a potential fix but missed it the first time and now I get a page not found error for the beta.
I am using Windows 10, ver 1903, WSJT-X 2.2.0, and JTAlert 2.16.6
Any ideas? Thanks
John, KA5BJC