Date   

locked Re: Decodes window not always populating

W4WT
 

Laurie,

I have the startup options set to "delete old records" and I do not apply a filter to the decodes display.

Joe W4WT


locked Re: JTAlert 2.16.4 is depopulating with 2nd wsjt-x 2.2.1 decode

HamApps Support (VK3AMA)
 

I already answered your question posted on the wsjtx group

Simple fix, your need to be running a JTAlert version compatible (2.16.4 is NOT) with the new early decodes processing of WSJT-X 2.2.1. Upgrade JTAlert, the latest is 2.16.7.
--
de Laurie, VK3AMA


locked JTAlert 2.16.4 is depopulating with 2nd wsjt-x 2.2.1 decode

Bob Frostholm
 

Windows 7, Ultimate, with Intel Core i7 processor...HP Laptop. FT8 and
prior to that, JT65, have been running perfect for me for the past 5+
years.... never any issues.

After upgrading to WSJT-X 2.2.1, I'm having a strange behavior with
JTAlert 2.16.4.

As the 15 second decode process reaches about 11 seconds, an initial
decode takes place an populates my JTAlert screen. So far so good.

But then a couple of seconds later, another decode takes place, adding a
handful of ADDITIONAL lines to my WSJT-X Activity screen.... but at that
time, my initial JTAlert screen clears and only the handful of new
decodes appear for the balance of the next 15 seconds.

Has anyone else seen this and have a solution to offer?

--
73

Bob

Ko6Lu



--
Bob
KO6LU


locked Re: JTAlert stops reporting decodes and logging to HRD sporadically #HRD

HamApps Support (VK3AMA)
 

On 12/06/2020 1:08 am, Jim Denneny wrote:
Yesterday I had same issue with JTAlert.  Latest WSJT-X, JTAlert, Win10 v1909.  JTAlert would not capture WSJT-X signals.  Today, it works.  Go figure

73, Jim K7EG

Another example where a Win10 restart corrected application misbehavior.

de Laurie VK3AMA


locked Re: Sound Test works no audio alert for CQ

Arni Hagen
 

Excellent instructions

 

You all have many great sound files!

 

Thank you, W5SRO

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of HamApps Support (VK3AMA)
Sent: Thursday, June 11, 2020 12:45 PM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Sound Test works no audio alert for CQ

 

On 11/06/2020 11:38 pm, Arni Hagen wrote:

Using Sounds 2.5.3, Call Signs 2020.06.08
Sound Test returns spoken "Test 1 2 3"
No audio alert for received my call or CQ
point me to the instructions. Thanks, W5SRO

Check that you have a sounds assigned for these Alerts.

de Laurie VK3AMA


locked Re: JTAlert to N3FJP VHF Contest Log v6.2

HamApps Support (VK3AMA)
 

On 12/06/2020 6:48 am, Mike Coogan wrote:
With June VHF Contest this weekend, doing a test of JTAlert logging WSJT-X Digi modes to N3FJP VHF Contest Log, v6.2. All appears to work except
receive the above alarm, that JTAlert did not log test Qso's. They are in fact logged as expected. Ignore the alarm??
Thanks Laurie for your great program.
Mike KB7ME

Mike,

Two possible causes.
  1. N3FJP log is busy post logging and had not written the QSO to its log file when JTAlert went to check. See the JTAlert Help File, "Frequently Asked Questions -> Warning about QSO not logged when it is logged" topic and adjust the time value.

  2. If after adjusting the retry time from point 1, your still get this error the likely cause is that you haven't setup JTAlert correctly and it is not reading the correct log file. See the JTAlert Help File, "Tutorials -> N3FJP Contest Logs Logging" topic.

Let us know how you get on.

de Laurie VK3AMA


locked JTAlert to N3FJP VHF Contest Log v6.2

Mike Coogan
 



With June VHF Contest this weekend, doing a test of JTAlert logging WSJT-X Digi modes to N3FJP VHF Contest Log, v6.2. All appears to work except
receive the above alarm, that JTAlert did not log test Qso's. They are in fact logged as expected. Ignore the alarm??
Thanks Laurie for your great program.
Mike KB7ME



locked Re: Decodes window not always populating

John Holmes W9ILY
 

Laurie,
In have "Delete Old Records" checked and I do not use any filters.
Thanks.

John W9ILY


locked Re: Midway?

Carter
 

In 2002, I worked P5/4L4FN on 15 meter RTTY. The band was not overloaded with amps as you might expect. The only problem was that he was running at the "European" 66 words per minute instead of the more usual 60 wpm. Fortunately, after a couple of calls I realized that and changed the Kantronics KAM+ to 66 wpm and got him on the first call and his QSL.

On Thursday, June 11, 2020, 9:24:14 AM EDT, Jim N6VH <n6vh@...> wrote:



On 6/10/2020 2:36 PM, HamApps Support (VK3AMA) wrote:
On 11/06/2020 6:27 am, Jim N6VH wrote:

Yes, you are right. He is using the /4 to indicate the call area. However, that is interpreted by some logging programs as /AH4, which is Midway. Log4OM v2 (my main logging program) considers AH6P/4 as Midway. Log4Om v1 lists it as Hawaii. N1MM+ shows Midway. DXKeeper, as Laurie already mentioned, doesn't list a country, and asks for a country code to be entered. ACLog lists it as Hawaii.  Swisslog shows Midway. If I enter AH6P/W4, all logs correctly show United States. That would probably be the better call for him to use.

73,

Jim N6VH


Jim, good report, thanks for the tests.

It could be worse, the Station in question could be running portable in Zone 5 and signing "/P5".

de Laurie VK3AMA


locked Re: Sound Test works no audio alert for CQ

HamApps Support (VK3AMA)
 

On 11/06/2020 11:38 pm, Arni Hagen wrote:
Using Sounds 2.5.3, Call Signs 2020.06.08
Sound Test returns spoken "Test 1 2 3"
No audio alert for received my call or CQ
point me to the instructions. Thanks, W5SRO
Check that you have a sounds assigned for these Alerts.

de Laurie VK3AMA


locked Sound Test works no audio alert for CQ

Arni Hagen
 

Using Sounds 2.5.3, Call Signs 2020.06.08
Sound Test returns spoken "Test 1 2 3"
No audio alert for received my call or CQ
point me to the instructions. Thanks, W5SRO


locked Re: JTAlert stops reporting decodes and logging to HRD sporadically #HRD

Jim Denneny
 

Michael

Yesterday I had same issue with JTAlert.  Latest WSJT-X, JTAlert, Win10 v1909.  JTAlert would not capture WSJT-X signals.  Today, it works.  Go figure

73, Jim K7EG


locked Re: Midway?

Jim N6VH
 


On 6/10/2020 2:36 PM, HamApps Support (VK3AMA) wrote:
On 11/06/2020 6:27 am, Jim N6VH wrote:

Yes, you are right. He is using the /4 to indicate the call area. However, that is interpreted by some logging programs as /AH4, which is Midway. Log4OM v2 (my main logging program) considers AH6P/4 as Midway. Log4Om v1 lists it as Hawaii. N1MM+ shows Midway. DXKeeper, as Laurie already mentioned, doesn't list a country, and asks for a country code to be entered. ACLog lists it as Hawaii.  Swisslog shows Midway. If I enter AH6P/W4, all logs correctly show United States. That would probably be the better call for him to use.

73,

Jim N6VH


Jim, good report, thanks for the tests.

It could be worse, the Station in question could be running portable in Zone 5 and signing "/P5".

de Laurie VK3AMA

_._,_._,_


I can't even imagine what the band would sound like - especially when everybody turned on their amps.  :-)

73,

Jim N6VH



locked Re: Download ver 2.16.7 immediately getting removed by Norton

neil_zampella
 

Whenever any antivirus labels something as 'trojan.GEN.MBT' its basically saying, this looks like something, that may be something else, it may be safe but we're not sure, so we're going to give it a label, and quarantine.

GEN stands for 'generic' which means it could be anything.

Neil, KN3ILZ


On Wed, Jun 10, 2020 at 04:37 PM, Jim N6VH wrote:

Trojan.GEN.MBT


locked Re: Decodes window not always populating

WB8ASI Herb
 

You can toggle it off and on using F9.  I'm using Delete Old Files and filtering out Worked B4.  73 Herb WB8ASI


locked Re: download ver 2.16.6

Andrew Buza
 

Thanks Mike; As usual you have been a great resource of help.  I'll be reviewing that Microsoft link and setting up defender for the future both for JTalert and Log4Om. You were the one who helped me initially install Log40m after getting my rig to run WSJTx and JTalert.
Interesting development; Couldn't get ver 2.16.7 to run. I assumed it was the antivirus.  Previously I have used MS Edge to download programs.  Today I used Firefox and the program installed smooth as a baby's bottom.  Made contacts and all running well.  Another learning experience;  not only is antivirus a problem but the darn browser can also be the cause.


locked Re: JTAlert stops reporting decodes and logging to HRD sporadically #HRD

roamer
 



Get Outlook for Android gggggbgggghhz,xsestt3zeeees


From: Support@HamApps.groups.io <Support@HamApps.groups.io> on behalf of Michael, DJ2VA via groups.io <dj2va@...>
Sent: Sunday, June 7, 2020 4:22:39 AM
To: Support@HamApps.groups.io <Support@HamApps.groups.io>
Subject: [HamApps] JTAlert stops reporting decodes and logging to HRD sporadically #HRD
 
I was using several previous versions of JTAlert, WSJT-X and Hamradio Deluxe. Reporting Alerts and logging to HRD 6.7.0.xxx worked fine until I upgraded to JTAlert 2.16.6 and WSJT-X 2.2.0 RC3.
Now happens again and again, that JTAlert stops reporting decodes after a random period of time (several minutes). At the same time QSOs are no longer logged to HRD. Leaving everything on its own it takes again several minutes and suddenyl reporting starts again, also logging to HRD works again.

I could also force JTAlert to start reporting / logging, by closing and restarting JTAlert.
Does anybody else recognize that? Any ideas how to solve that problem?

73,
Michael


locked Re: JTAlert 2.16.7 not logging Country field in HRD #HRD

HamApps Support (VK3AMA)
 

On 11/06/2020 1:57 am, David De Coons wrote:
Laurie, you can direct HRD related support issues from users to me if you like. I really appreciate your app and I want to contribute. 

73
Dave wo2x

Tnx Dave!

de Laurie VK3AMA


locked Re: JTAlert 2.16.7 not logging Country field in HRD #HRD

HamApps Support (VK3AMA)
 

On 11/06/2020 1:42 am, Roger M via groups.io wrote:
Regarding the issue of JTAlert not logging the country field to HRD:
After a system reboot, the problem has not occurred again.

Thanks for your help.

Roger
AC6BW

Thanks for the update Roger.

Since a PC restart corrected the problem, my guess is your running Windows 10, is that the case?
It has been my experience with Win10 that when unusual, unexpected or abnormal application behavior is experienced, often the fix is to perform a Windows restart, and this is not exclusive to JTAlert. I frequently see this on my development PC when using Visual Studio it starts to be erratic and an application restart doesn't correct the problems, but a PC restart does, and this is without any pending Windows updates.

de Laurie VK3AMA


locked Re: Decodes window not always populating

HamApps Support (VK3AMA)
 

On 11/06/2020 5:26 am, Joe Spear wrote:
I have the same problem with the window not populating on startup.  It was happening with 2.16.4 and is happening with 2.16.7.  Refresh doesn't help.  Need to close and re-open and then it populates, as John said.  It's as if the decodes file isn't being loaded before the window is shown.

Joe W4WT

Joe,

Referring to https://hamapps.groups.io/g/Support/message/30323 want are your answers to the two questions asked?

de Laurie VK3AMA