Date   

locked Re: CQ Marathon query

Phil Cooper
 

Hi Patrick,

 

What alerted me was that it was the same station on two different bands that triggered the same alert.

That was what made me query it in the first place.

 

73 de Phil GU0SUP

 

 

-----Original Message-----
From: "Patrick Hung" <pathung@...>
Sent: Wednesday, 3 February, 2021 16:25
To: Support@HamApps.groups.io
Subject: Re: [HamApps] CQ Marathon query

A possible answer - CQ Marathon counts both DX and CQ Zones (each combination counts once), so if a station in the same country but different CQ Zone appears, the alert is triggered.
--
73,

Patrick - W6AJR


locked Re: CQ Marathon query

Phil Cooper
 

Hi Dave,

 

Yes, everything is up to date.

 

73 de Phil GU0SUP

 

 

-----Original Message-----
From: "Dave Cole" <dave@...>
Sent: Wednesday, 3 February, 2021 15:00
To: Support@HamApps.groups.io
Subject: Re: [HamApps] CQ Marathon query

Wow... I am at a loss as well... Try reinstalling, I am assuming you
are at the latest version?

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 2/3/21 6:24 AM, Phil Cooper via groups.io wrote:
> Hi Steve,
>
> Yes, that's checked too....
>
> 73 de Phil GU0SUP
>
> -----Original Message-----
> From: "Steve, N3SL" <n3sl@...>
> Sent: Wednesday, 3 February, 2021 14:16
> To: Support@hamapps.groups.io
> Subject: Re: [HamApps] CQ Marathon query
>
> Have you checked the "No QSL Confirmation" box - presuming you're not
> wanting/needing a confirmation?
>
> On Wed, Feb 3, 2021 at 8:07 AM Phil Cooper via groups.io
> <http://groups.io> <pcooper@...
> <mailto:suremail.gg@groups.io>> wrote:
>
> Hi Dave,
>
> That is exactly what IS set in my settings under CQ Marathon, but I
> am still seeing the same country being alerted on 20m when it has
> already been worked on 17m.
>
> Same goes if I work something on FT8, and change to FT4, a
> previously worked country still alerts as a wanted CQ Marathon.
>
> 73 de Phil GU0SUP
>
> -----Original Message-----
> From: "Dave Cole" <dave@... <mailto:dave@...>>
> Sent: Wednesday, 3 February, 2021 13:34
> To: Support@HamApps.groups.io <mailto:Support@HamApps.groups.io>
> Subject: Re: [HamApps] CQ Marathon query
>
> Hi,
>
> Yes! Perform the following steps:
>
> 1. Go to "Settings".
> 2. Select "Manage Settings".
> 3. Click the "+" to the left of the words "Wanted CQ Marathon", in the
> settings hierarchical list.
> 3. Click the word "Bands", directly under under "Wanted CQ Marathon".
> 4. A dialog box opens up, with many ooptions in it, under the
> "Tracking" area, select "Any Band", then additionally select "Any
> Mode",
> and save your settings, then exit.
>
> That should set you up for the Marathon...
>
> 73, and thanks,
> Dave (NK7Z)
> https://www.nk7z.net
> ARRL Volunteer Examiner
> ARRL Technical Specialist, RFI
> ARRL Asst. Director, NW Division, Technical Resources
>
> On 2/3/21 3:17 AM, Phil Cooper via groups.io <http://groups.io> wrote:
> > Hi all,
> >
> > Is there a simple way to get the CQ Marathon alerts to only work
> with
> > one country over all bands?
> >
> > To explain, if I work - say - OY1R on 20m FT8, I also get a New
> Marathon
> > alert for that call on FT4, and also on any other band/mode.
> >
> > As the CQ Marathon award only considers countries once,
> regardless of
> > band (or mode), it would be useful if JTAlert followed that.
> >
> > Maybe I am just missing something?
> >
> > 73 de Phil GU0SUP
> >
> >
>
>
>
>
>
>






locked Re: JTAlert not working??

neil_zampella
 

What do you show for your UDP interface settings?    WSJT-X v2.3.0 has new settings that you should select and use.  Here's mine:

 

 

Neil, KN3ILZ


locked Re: Config problems

William Osborne
 

Thanks Herb

Thanks,
Bill


locked Re: Config problems

neil_zampella
 

Its a WSJT-X setting, under REPORTING tab.

 

Neil, KN3ILZ


locked Re: Config problems

WB8ASI Herb
 

It's at the top of the list when you click Settings.  73, Herb WB8ASI


locked Config problems

William Osborne
 

Where do I find "Settings -> WSJT-X UDP Multicast on Loopback" this setting?

Thanks,
Bill--K5ZQ


locked Re: CQ Marathon query

Jim N6VH
 


On 2/3/2021 6:24 AM, Phil Cooper via groups.io wrote:

Hi Steve,

 

Yes, that's checked too....

 

73 de Phil GU0SUP

 

Phil,

Go to Settings - Alerts - Wanted CQ Marathon.

Check "Auto clear triggered Alert entity after logging".

See attached picture.



locked Re: CQ Marathon query

Patrick Hung
 

A possible answer - CQ Marathon counts both DX and CQ Zones (each combination counts once), so if a station in the same country but different CQ Zone appears, the alert is triggered.
--
73,

Patrick - W6AJR


locked JTAlert not working??

Morris WA4MIT
 

Hello
I am a long time Alert user but suddenly this week having issues that I cannot seem to debug. I am using Alert 2.16.7 with either WSJTX 2.3.0 or JTDX 2.2.0 rc152 (older version but works for me). I am not seeing any callsigns being displayed
in JTAlert, if I double click a callsign it is placed into Alert but no QRZ lookup (XML subscriber) at this point I cannot place another call into Alert the first call remains and alert is not logging into HRD (.323) latest release. To my knowledge nothing
has been changed anywhere this all started this week. I looked at help files about the UDP changing did not help. These same symptoms are happening with JTDX and WSJTX. I went into Windows firewall and Alert was already given a pass and I 
added JTDX and WSJTX but no change. Everything was working great prior to this week.
Thanks 73 
Morris WA4MIT


locked Re: JTAlert locks up if too many QSO's in HRD logbook #HRD

neil_zampella
 

As mentioned in the original thread .. did you go back into WSJT-X, select the LOOPBACK selection in the UDP IP address, click on OK to save the settings, then exit WSJT-X, and JT-Alert, then restart both?    If you did, use the CONTACT SUPPORT link under the HELP menu so that Laurie will get the files he needs to assist you.

Repeating you issue in every thread about HRD doesn't help without Laurie knowing the exact environment.

 

Neil, KN3ILZ


locked Re: CQ Marathon query

Dave (NK7Z)
 

Wow... I am at a loss as well... Try reinstalling, I am assuming you are at the latest version?

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 2/3/21 6:24 AM, Phil Cooper via groups.io wrote:
Hi Steve,
Yes, that's checked too....
73 de Phil GU0SUP
-----Original Message-----
From: "Steve, N3SL" <n3sl@arrl.net>
Sent: Wednesday, 3 February, 2021 14:16
To: Support@hamapps.groups.io
Subject: Re: [HamApps] CQ Marathon query
Have you checked the "No QSL Confirmation" box - presuming you're not wanting/needing a confirmation?
On Wed, Feb 3, 2021 at 8:07 AM Phil Cooper via groups.io <http://groups.io> <pcooper=suremail.gg@groups.io <mailto:suremail.gg@groups.io>> wrote:
Hi Dave,
That is exactly what IS set in my settings under CQ Marathon, but I
am still seeing the same country being alerted on 20m when it has
already been worked on 17m.
Same goes if I work something on FT8, and change to FT4, a
previously worked country still alerts as a wanted CQ Marathon.
73 de Phil GU0SUP
-----Original Message-----
From: "Dave Cole" <dave@nk7z.net <mailto:dave@nk7z.net>>
Sent: Wednesday, 3 February, 2021 13:34
To: Support@HamApps.groups.io <mailto:Support@HamApps.groups.io>
Subject: Re: [HamApps] CQ Marathon query
Hi,
Yes! Perform the following steps:
1. Go to "Settings".
2. Select "Manage Settings".
3. Click the "+" to the left of the words "Wanted CQ Marathon", in the
settings hierarchical list.
3. Click the word "Bands", directly under under "Wanted CQ Marathon".
4. A dialog box opens up, with many ooptions in it, under the
"Tracking" area, select "Any Band", then additionally select "Any
Mode",
and save your settings, then exit.
That should set you up for the Marathon...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 2/3/21 3:17 AM, Phil Cooper via groups.io <http://groups.io> wrote:
> Hi all,
>
> Is there a simple way to get the CQ Marathon alerts to only work
with
> one country over all bands?
>
> To explain, if I work - say - OY1R on 20m FT8, I also get a New
Marathon
> alert for that call on FT4, and also on any other band/mode.
>
> As the CQ Marathon award only considers countries once,
regardless of
> band (or mode), it would be useful if JTAlert followed that.
>
> Maybe I am just missing something?
>
> 73 de Phil GU0SUP
>
>


locked Re: CQ Marathon query

Steve, N3SL
 

Presuming you've done a "rebuild," I can't think of anything else!  Very strange.


On Wed, Feb 3, 2021 at 8:24 AM Phil Cooper via groups.io <pcooper=suremail.gg@groups.io> wrote:

Hi Steve,

 

Yes, that's checked too....

 

73 de Phil GU0SUP

 

 

-----Original Message-----
From: "Steve, N3SL" <n3sl@...>
Sent: Wednesday, 3 February, 2021 14:16
To: Support@hamapps.groups.io
Subject: Re: [HamApps] CQ Marathon query

Have you checked the "No QSL Confirmation" box - presuming you're not wanting/needing a confirmation?

On Wed, Feb 3, 2021 at 8:07 AM Phil Cooper via groups.io <pcooper=suremail.gg@groups.io> wrote:

Hi Dave,

 

That is exactly what IS set in my settings under CQ Marathon, but I am still seeing the same country being alerted on 20m when it has already been worked on 17m.

Same goes if I work something on FT8, and change to FT4, a previously worked country still alerts as a wanted CQ Marathon.

 

73 de Phil GU0SUP

 

 

 

-----Original Message-----
From: "Dave Cole" <dave@...>
Sent: Wednesday, 3 February, 2021 13:34
To: Support@HamApps.groups.io
Subject: Re: [HamApps] CQ Marathon query

Hi,

Yes! Perform the following steps:

1. Go to "Settings".
2. Select "Manage Settings".
3. Click the "+" to the left of the words "Wanted CQ Marathon", in the
settings hierarchical list.
3. Click the word "Bands", directly under under "Wanted CQ Marathon".
4. A dialog box opens up, with many ooptions in it, under the
"Tracking" area, select "Any Band", then additionally select "Any Mode",
and save your settings, then exit.

That should set you up for the Marathon...

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 2/3/21 3:17 AM, Phil Cooper via groups.io wrote:
> Hi all,
>
> Is there a simple way to get the CQ Marathon alerts to only work with
> one country over all bands?
>
> To explain, if I work - say - OY1R on 20m FT8, I also get a New Marathon
> alert for that call on FT4, and also on any other band/mode.
>
> As the CQ Marathon award only considers countries once, regardless of
> band (or mode), it would be useful if JTAlert followed that.
>
> Maybe I am just missing something?
>
> 73 de Phil GU0SUP
>
>






locked Re: CQ Marathon query

Phil Cooper
 

Hi Steve,

 

Yes, that's checked too....

 

73 de Phil GU0SUP

 

 

-----Original Message-----
From: "Steve, N3SL" <n3sl@...>
Sent: Wednesday, 3 February, 2021 14:16
To: Support@hamapps.groups.io
Subject: Re: [HamApps] CQ Marathon query

Have you checked the "No QSL Confirmation" box - presuming you're not wanting/needing a confirmation?

On Wed, Feb 3, 2021 at 8:07 AM Phil Cooper via groups.io <pcooper=suremail.gg@groups.io> wrote:

Hi Dave,

 

That is exactly what IS set in my settings under CQ Marathon, but I am still seeing the same country being alerted on 20m when it has already been worked on 17m.

Same goes if I work something on FT8, and change to FT4, a previously worked country still alerts as a wanted CQ Marathon.

 

73 de Phil GU0SUP

 

 

 

-----Original Message-----
From: "Dave Cole" <dave@...>
Sent: Wednesday, 3 February, 2021 13:34
To: Support@HamApps.groups.io
Subject: Re: [HamApps] CQ Marathon query

Hi,

Yes! Perform the following steps:

1. Go to "Settings".
2. Select "Manage Settings".
3. Click the "+" to the left of the words "Wanted CQ Marathon", in the
settings hierarchical list.
3. Click the word "Bands", directly under under "Wanted CQ Marathon".
4. A dialog box opens up, with many ooptions in it, under the
"Tracking" area, select "Any Band", then additionally select "Any Mode",
and save your settings, then exit.

That should set you up for the Marathon...

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 2/3/21 3:17 AM, Phil Cooper via groups.io wrote:
> Hi all,
>
> Is there a simple way to get the CQ Marathon alerts to only work with
> one country over all bands?
>
> To explain, if I work - say - OY1R on 20m FT8, I also get a New Marathon
> alert for that call on FT4, and also on any other band/mode.
>
> As the CQ Marathon award only considers countries once, regardless of
> band (or mode), it would be useful if JTAlert followed that.
>
> Maybe I am just missing something?
>
> 73 de Phil GU0SUP
>
>






locked Re: CQ Marathon query

Steve, N3SL
 

Have you checked the "No QSL Confirmation" box - presuming you're not wanting/needing a confirmation?


On Wed, Feb 3, 2021 at 8:07 AM Phil Cooper via groups.io <pcooper=suremail.gg@groups.io> wrote:

Hi Dave,

 

That is exactly what IS set in my settings under CQ Marathon, but I am still seeing the same country being alerted on 20m when it has already been worked on 17m.

Same goes if I work something on FT8, and change to FT4, a previously worked country still alerts as a wanted CQ Marathon.

 

73 de Phil GU0SUP

 

 

 

-----Original Message-----
From: "Dave Cole" <dave@...>
Sent: Wednesday, 3 February, 2021 13:34
To: Support@HamApps.groups.io
Subject: Re: [HamApps] CQ Marathon query

Hi,

Yes! Perform the following steps:

1. Go to "Settings".
2. Select "Manage Settings".
3. Click the "+" to the left of the words "Wanted CQ Marathon", in the
settings hierarchical list.
3. Click the word "Bands", directly under under "Wanted CQ Marathon".
4. A dialog box opens up, with many ooptions in it, under the
"Tracking" area, select "Any Band", then additionally select "Any Mode",
and save your settings, then exit.

That should set you up for the Marathon...

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 2/3/21 3:17 AM, Phil Cooper via groups.io wrote:
> Hi all,
>
> Is there a simple way to get the CQ Marathon alerts to only work with
> one country over all bands?
>
> To explain, if I work - say - OY1R on 20m FT8, I also get a New Marathon
> alert for that call on FT4, and also on any other band/mode.
>
> As the CQ Marathon award only considers countries once, regardless of
> band (or mode), it would be useful if JTAlert followed that.
>
> Maybe I am just missing something?
>
> 73 de Phil GU0SUP
>
>






locked Re: CQ Marathon query

Phil Cooper
 

Hi Dave,

 

That is exactly what IS set in my settings under CQ Marathon, but I am still seeing the same country being alerted on 20m when it has already been worked on 17m.

Same goes if I work something on FT8, and change to FT4, a previously worked country still alerts as a wanted CQ Marathon.

 

73 de Phil GU0SUP

 

 

 

-----Original Message-----
From: "Dave Cole" <dave@...>
Sent: Wednesday, 3 February, 2021 13:34
To: Support@HamApps.groups.io
Subject: Re: [HamApps] CQ Marathon query

Hi,

Yes! Perform the following steps:

1. Go to "Settings".
2. Select "Manage Settings".
3. Click the "+" to the left of the words "Wanted CQ Marathon", in the
settings hierarchical list.
3. Click the word "Bands", directly under under "Wanted CQ Marathon".
4. A dialog box opens up, with many ooptions in it, under the
"Tracking" area, select "Any Band", then additionally select "Any Mode",
and save your settings, then exit.

That should set you up for the Marathon...

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 2/3/21 3:17 AM, Phil Cooper via groups.io wrote:
> Hi all,
>
> Is there a simple way to get the CQ Marathon alerts to only work with
> one country over all bands?
>
> To explain, if I work - say - OY1R on 20m FT8, I also get a New Marathon
> alert for that call on FT4, and also on any other band/mode.
>
> As the CQ Marathon award only considers countries once, regardless of
> band (or mode), it would be useful if JTAlert followed that.
>
> Maybe I am just missing something?
>
> 73 de Phil GU0SUP
>
>






locked Re: CQ Marathon query

Dave (NK7Z)
 

Hi,

Yes! Perform the following steps:

1. Go to "Settings".
2. Select "Manage Settings".
3. Click the "+" to the left of the words "Wanted CQ Marathon", in the settings hierarchical list.
3. Click the word "Bands", directly under under "Wanted CQ Marathon".
4. A dialog box opens up, with many ooptions in it, under the "Tracking" area, select "Any Band", then additionally select "Any Mode", and save your settings, then exit.

That should set you up for the Marathon...

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 2/3/21 3:17 AM, Phil Cooper via groups.io wrote:
Hi all,
Is there a simple way to get the CQ Marathon alerts to only work with one country over all bands?
To explain, if I work - say - OY1R on 20m FT8, I also get a New Marathon alert for that call on FT4, and also on any other band/mode.
As the CQ Marathon award only considers countries once, regardless of band (or mode), it would be useful if JTAlert followed that.
Maybe I am just missing something?
73 de Phil GU0SUP


locked CQ Marathon query

Phil Cooper
 

Hi all,

 

Is there a simple way to get the CQ Marathon alerts to only work with one country over all bands?

 

To explain, if I work - say - OY1R on 20m FT8, I also get a New Marathon alert for that call on FT4, and also on any other band/mode.

 

As the CQ Marathon award only considers countries once, regardless of band (or mode), it would be useful if JTAlert followed that.

 

Maybe I am just missing something?

 

73 de Phil GU0SUP


locked Re: JTAlert locks up if too many QSO's in HRD logbook #HRD

Monty Wilson, NR0A
 

Yes, I know I need to move to Maria.  However, since all of this was working under WSJT-X 2.2.2 and since the only known change to the system was the installation of WSJT-X 2.3.0., I am reluctant to make to many changes without an indication that is definitely the problem.

 

….of course, now I need to get WST-X and JTALERT communicating again……

 

Thanks

 

Monty, NR0A

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of Darin Crowley
Sent: Tuesday, February 2, 2021 07:21 PM
To: Support@hamapps.groups.io
Subject: Re: [HamApps] JTAlert locks up if too many QSO's in HRD logbook #HRD

 

Getting Maria loaded and working was pretty straight forward with instructions on HRD sites.

 

Darin

 

On Tue, Feb 2, 2021, 5:41 PM <ka5bjc@...> wrote:

This sounds like the problem I have had for half a year or so but I have HRD5. Like Barry, I exported everything, created a new database and imported everything. Seems to work so I deleted the old database and ODBC. Now I need to learn about Maria and how to get the data into it. Don't you have to define all the fields first?


locked Re: JTAlert locks up if too many QSO's in HRD logbook #HRD

Darin Crowley
 

Getting Maria loaded and working was pretty straight forward with instructions on HRD sites.

Darin

On Tue, Feb 2, 2021, 5:41 PM <ka5bjc@...> wrote:
This sounds like the problem I have had for half a year or so but I have HRD5. Like Barry, I exported everything, created a new database and imported everything. Seems to work so I deleted the old database and ODBC. Now I need to learn about Maria and how to get the data into it. Don't you have to define all the fields first?

4201 - 4220 of 37152