Johan, Google translate says "cessé de fonctionner" translates as "stopped working". Is that correct? Is it only the Decodes window that is having problems? If so it is

No, select 64 bit (x64) if you have installed the 64 bit version of JT-Alert and select 32 (x86) bit if you have installed the 32 bit version of JT-Alert. In *BOTH* cases make sure you select the

Are you saying you have the runtime 5.0.9 installed? Are you sure you installed the correct version for your computer? 32 bit or 64 bit?? You download it from here:

You're directly logging to Logger32, correct? I suspect its taking control of the UDP port. Look under HELP for Multicast setup. If Logger32 can handle Multicasting UDP packets, then setting up

You do realize that this will not give you any alerts from JTAlert as it has no access to see if you worked anyone before on any mode. Neil, KN3ILZ

hi all this day i have install jtalert for wsjt same prob desktop runtime 5.0.9 installed anyone have an idea ? Regards F4HHL

Bob, Go to Settings - Alerts - Miscellaneous Alerts - Wanted Callsign. Under Options, check "Alert when decoded Callsign worked B4". 73, Jim N6VH

I recently set up logger32 on a new IC-7300 transceiver and have rig control and decoding working well on JTDX and WSJT-X. However, when I launch logger32, JTAlert stops decoding. Please note that the

Here are my setup pages. This works for me.

Good evening Steve can you tell me the method you use I have HRD de luxe as my log 73 Denis F8NHF

Hi Laurie, As many have said, THANKS for the wonderful work you do to enhance our hobby. I have an observation that may not have a solution. I chase grids among other things...a fun way is chasing

test 73 Bob Ko6Lu -- Bob KO6LU

Thanks much for solving my mystery. Sorry I missed your previous post - I tend to not do much FT4 and I never had the occasion to experience the problem. The situation with V31MA constantly calling

I already raised this issue in message #36167 in mid July. It only seems to happen on FT4 as everything works as expected on FT8. It also happens if you switch bands and back again whilst on

Okay Thanks, I will give that a try. Steve - AD4K

Steve, JTAlert loads worked before data form your logging program at startup and updates it as you log stations, if you don't have JTAlert doing the logging into your logging program then it will not

I recently upgraded to JTALERT Version 2.50.5 which has the new "Miscellaneous Alerts" "B4" history selection. I did not change my B4 settings to anything but continuous (no timeout). It might be

Jim, Running WSJTX v 2.4.0 . . . Not sure where routed, found it to be bizarre as just an issue with one call sign and still existed after app and pc reboots . . -- Paul / N3PS

Paul, this sounds like a WSJT-X issue. What version are you running? -- Jim Reisert AD1C, <jjreisert@...>, https://www.ad1c.us

Hi all just reinstall my radio Pc i have apron with JTAlert for JTDX when windows decode is open i ahev this message Uninstall my AV/ reinstall software/reboot install a ols version always the