By default WSJT-X logs to an ADIF file. File/Open log directory You will find wsjtx_log.adi If you enable Reporting correctly it will go to JTAlert. If you then set up a logger in JTAlert it will

I have WSJT-X running and will get started with JTAlert in the next day or two.  With WSJT-X 2.4.0 there is a popup at the end of a successful QSO that says 'Click OK to confirm the following QSO'. 

I connected up with and got him fixed. Was a problem installing the correct .Net package which was giving problems. Required unistalling the old .net package, reboot, install new one, reboot. All

Hi Joe, Thanks, but that did not work..

See the Help topic -> WSJT-X UDP Setup in JTAlert's main window. 73, ... Joe, W4TV

Callsigns Window ... Click on the "hamburger" icon in the upper left, select "View type" and the 7th option will be "Alert FFMA Grid" You can configure any pane in the Callsigns Window to show FFMA

Wyndell - What callsign do you enter when the person hasn't been posted on the POTA web site and you have no idea he is out activating a park? There's more to this than you realize. 73, Marlo KA2IRQ

Hello, I just installed JT and am unable to get it to sync to wsjtx. When JTA starts all I see is a ???m in the heading. See link,https://ibb.co/10cMY1b . I have uninstalled and reinstalled, looked at

There is a mention of a "window for Alert FFMA Grids". Where exactly is this found? I'm using v2.50.2. 73 de W4AS

Tnx for your advice Joe. 73's de Gerrit -----Oorspronkelijk bericht----- Van: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] Namens Joe Subich, W4TV Verzonden: maandag 5 juli 2021

*NEVER* run JT-Alert elevated. Instead, make sure none of your other software is running elevated (and if the other applications require elevation, *REPLACE THEM*). Running any application

Good Morning, I would like to report that I have the same problem. I installed earlier versions and the latest version and when I click the call sign tab the rig will not TX. I also went to the Call

Hi Many Thanks that works fine... I had not seen thismenu :-) 73 -- Daniel https://F6FLU.org Gordon Brown a écrit le 05/07/2021 à 12:18 :

Hi all JTAlert (version 2.50.1) does not remember the "on top" settings. Of course I press the "save" button once I have set it. I always need to go back to the settings so it works as I want it

If there is a taskbar entry for the Message window you can bring the window into view. I use this link

Hello, I have a problem with the"message" window in JTAlert (V 2.50.2). I use 1 laptop PC with 2 external screens say screen 1 and screen 2. The "message"window is normally on screen 2 and the main

Did you try to start JTAlert elevated (Administrator rights)? Did the trick for me. Gerrit – PA3DJY Van: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] Namens

Please help…. I’ve done everything I can think of. I know your supposed to be able to double click a callsign in the Callsigns Window, and it should place the JTDX into transmit. My previous

I get this trying to run and don't know why?

But you can go to wanted call signs and enter call signs Wyndell - K5WJF Resistance is NOT futile, it's Voltage divided by Current