Running latest versions of HRD, WSJT-X and jyalert. I have QRZ logging turned on in jtalert under web services but it does not auto fill when contact logged. I have to do a manual lookup. Is there

I had to set my log4om manually. It would not autofind but i assume cause my lig is on onedrive

After turning ACLog off it does start to show call signs, but clicking on them does nothing. Sometimes the call signs are flashing? Sometimes no calls show at all? Don VA3ZV

Gary, I am curious. Why did you bother with N3FJP? WSJT-X will give you a Cabrillo log and JTAlert will tell you when you have already worked a station on a particular band. AK2L

Does JTAlert work if you don't start ACLog? Mike W9MDB

After upgrading both JTAlert and WSJT-X, JTAlert stopped working? Went back to Ver 2.16.17 and still nothing? WSJT-X seems to work and still communicates with ACLog? Unable to communicate with the

Hello, I am running 2.50.1 and have noticed that i am getting an error box that JTA can not confirm that the call was logged, I looked in settings and notice that there is no log file listed on the

Please disregard . It would help if I had hit the save button. My error. Sorry to bother everyone. -- 73 NU4N Dave

GM. I am using 2.50.1

What version of JTAlert? Mike W9MDB

GM. In peak hours with a lot of decodes coming from WSJT-X, the JTAlert window as I have configured (3X7) will overflow. Normally this is not an issue. Excess alerts will fill the screen and then

I have the parameters for docking above WSJT-X set correctly. Alert is not following WXJT-X Any ideas ?? Thanks -- 73 NU4N Dave-T

Hello, 2.50.1 vers. work fine,but i have a decodes windows blank,any infos is inside. I work with NET 5,win 10 ,64 bit .I have this problem with Wsjt-x and JTDX , FT8 or FT4 . Thank you 73's de

When i log via jtalert/wsjt the mode is always entered correctly. Drop down should be able change mode if manually logging.

Just got all working with JTAlert, WSJT and N3FJP for Field day. All appears to be functioning except that N3FJP always shows CW Mode (or wherever you set it manually). Wondering if I am missing

Do any hotkeys work (see manual)? 73 Charlie G4EST www.g4est.me.uk Stay safe out there

Good morning, I have a problem with JTAlert, after changing from Win 7 to Win10, after installing JTAlert 2.16.17, when running the program, it only shows me the "Decodes" screen but the main screen,

The only reason left for non coloring of the WSJT-X decodes with JTAlert alert colors is not having the Alerts enabled in JTAlert (see under the "Alerts" menu of the main JTAlert window.

Laurie VK3AMA wrote: "Check the main JTAlert window Settings, "Applications -> WSJT-X/JTDX" section, are the coloring options enabled?" Answer: YES, the coloring options are enabled;

Using 127.0.0.1 Or multicast 239.255.0.1 And make sure all three check boxes are done in reporting tab of wsjt. Maybe include a snap shot of settings so mike or Laurie can help