Hi All… Just to confirm that I detected this minor audio-alert issue. In my case, the CQ call sounds like clipped at the beggining. COuldn’t check the DX sounds, because, unfortunately, I

I see the same behavior on "Testing your sound Cahr" with the d missing.Can play the WAV file through other media players just fine. de Mike W9MDB

Hi Laurie, Same here with 2.15.1, correct sound card but no sound. W7 pro, was fine with previous version 2.15.0. Update; noticed that another sound card USB light was flashing when using TEST, went

Laurie 2.15.1 fixed my 2.15.0 download issue I had been posting for weeks. Defender gave me a gentle warning about 2.15.1 but let me proceed with the install. Thanks for the fix. 73, Jim K7EG

Laurie Here at home I have a Rasp pi running on my LAN which is an AIS monitor that feeds spots to MarineTraffic. Shortly after upgrading to .15.0 I received the following Access Denied screen

You're talking about two different devices on your network. Can't think of anyway JTAlert would be related to MarineTraffic -- I have one of those units too. de Mike W9MDB

Mike Yes I am talking about two different devices on the same LAN. MarineTraffic's explanation for denying me access is QUOTE Christiana Ladopoulou (MarineTraffic Support) Nov 1, 16:41 EET Dear

Would help if they could give you some more information on the traffic they're seeing. Ports at least and any packet info

Hi Laurie, Just download the latest version, but after my first FT8 contact this morning, it didn't indicate I had worked the contact before. I looked in the WSJTX.log and found the contact correctly

After upgrade there is a 30 second delay between the alert or test audio button press and the sound coming from the speakers Steve WS5W

Are you running a Flex with DAX audio? There have been a number of reports of excessive delay in playing audio, nothing as large as 30 secs, either 5 or 10 seconds. Common among the

Is it something to do for to get back b4log after fatal error Windows where i lost all data or i have to Write back manually from my log 73 de LA9GSA Sent from Mail for Windows 10

If you have lost your b4Log.mdb file a new empty one will be created. You can load that file with old contacts by doing an import of an adif file. Do an adif export from your main logger

OK thanks Sent from Mail for Windows 10

MikeYes we both have the COMAR unit so there should be next to no difference in the setup.JTAlert 2.15.0 was recently released as well as SLR350Ni_v_1_5_4_final was releaseda couple weeks ago. This is

Thank you... spot on advice!! But... Do you know if there is a way to get around Malwarebytes from Quarantining JTAlerts 2.15.1? I tell it to put it back, but every time I click on it, it quarantines

Create an exclusion for the JTAlert program directory. https://support.malwarebytes.com/docs/DOC-1130 de Mike W9MDB

Downloaded the new 2.15.1 with no problems from avg discarding the update. Thanks Laurie Wayne VK4ACN

Thank you Laurie VK3AMA and Mike W9MDB!! Your suggestions worked Great!! Up and running again. Eric W7IGC

Pity the MarineTraffic people didn't list what traffic they deemed unusual enough to block your IP. What ports were involved, the amount of data, what sort of connection, http, https, etc,