Hi, Many thanks to those who responded. to my post re the above. 73, Wes. GW3RIH

Bernd, Your screenshots didn't come through, so I am shooting in the dark. Did you do a logbook scan since you got the LoTW confirmation? The JTAlert-X worked B4 status is only as good as the last

Using WSJT-X, v1.80 and FT-1000D for Digital Modes (especially FT-8). The interface for the CAT Control is from MFJ. Unfortunately, the CAT Control with WSJT-X for the FT-1000D seems to be

I am probably still misunderstanding something, but I was expecting that if I have worked a station on 40m before since the beginning of January, it wouldn't be marked as a needed grid (it was even

Dave, Firstly, not related to the Grid alerts, your running an old pre-release beta of WSJT-X. You should be running the 1.8.0 general release. There were many

It does not populate when I have grid only. When I activate state or dxcc country it does populate. I cannot get the grid chase feature to work. I just uninstalled 2.10.8 and reinstalled it. Same

Laurie, Thanks, now I understand. I do LOTW sync daily or more often and now have done JTAlert scan log and will do so more often. Having lots of fun chasing grids in the ARRL International Grid

Thank You

Tim, Simple. Turn off all alert types (including CQ) except for the alerts your interested in. Then set the "Generate alerts for CQ only Callsigns" alert filter. JTAlert will then only

Rich, A grid will continue to be alerted until it is marked as no longer needed, that is it has been LoTW confirmed. You need to periodically sync DXKeeper with LoTW to get

Janny, The Band spots were temporarily disabled while an excessive load event was occurring on the Server, which has now been resolved. The Band spots displays have been working

Fred, Turn off your JTAlert Alert filters (note the "F" in the titlebar). You have the eQSL filter set so only Callsigns that are known eQSL(AG) members will have their

Already sent you my files (contact support). This is happening to both JTDX and to WSJT-X. Fred - KK5AA

I alert on three criteria: 1) CQ, 2) LoTW Member, 3) Wanted Grid. I see if all three criteria are met at the same time by setting up JTAlert as follows: 1. For CQ, I turn off "Enable CQ and QRZ

That did the trick. Thank you. 73, Tim K5TCJ

Thank you Brian, that took care of the problem. KO2F

My response went to support@hamapps.groups.io and you saw it because it went to the list. I just pointed out something that would help out a fellow ham. I did not claim to be any type of

Hi Mark, I believe that is what I did. Your email response should have been to GW3RIH. Thanks for your support function with JTAlert. 73, Rich - K1HTV = = =

Hi Laurie, As many thousands are now doing, I'm participating in the ARRL International Grid Chase. I just started using the JTAlert grid alert feature, where CQing stations in a grid not yet

YES