Thanks Mike!

Settings/Manage Settings/Alerts/CQ and QRZ de Mike W9MDB

Thanks Mike, I would like to try that. Where do I go to turn on the flags? Bob KO2F

Yes...you get credit for each band/mode every month. So 12 bands, 3 modes (Just looking at FT8, JT65, and JT9) , 12 months means up to 432 QSOs to the same call sign. :-) de Mike W9MDB

I think I found it, it seems that there is a distinction between FT8 and JT65 and JT9

Hi Jim, Yes, I did the scan, I scan several times a day, usually after I uploaded and synchronized with LoTW.

You can turn on flags which indicate if a CQ is directional or not. Alerts/CQ and QRZ has the two indicators "*" and "#" for non-directional an directional...so if you see "#" you should know to look

I really appreciate the fact that I can select an incoming CQ in the JTAlert application to trigger a response. This helps a lot in FT8 when there is so much band activity that the you have to scroll

That really has nothing to with this email list. Your problem is probably RF in the shack. You'll probably find a certain power level on certain bands will interrupt the USB devices. All sorts of

Hi, Many thanks to those who responded. to my post re the above. 73, Wes. GW3RIH

Bernd, Your screenshots didn't come through, so I am shooting in the dark. Did you do a logbook scan since you got the LoTW confirmation? The JTAlert-X worked B4 status is only as good as the last

Using WSJT-X, v1.80 and FT-1000D for Digital Modes (especially FT-8). The interface for the CAT Control is from MFJ. Unfortunately, the CAT Control with WSJT-X for the FT-1000D seems to be

I am probably still misunderstanding something, but I was expecting that if I have worked a station on 40m before since the beginning of January, it wouldn't be marked as a needed grid (it was even

Dave, Firstly, not related to the Grid alerts, your running an old pre-release beta of WSJT-X. You should be running the 1.8.0 general release. There were many

It does not populate when I have grid only. When I activate state or dxcc country it does populate. I cannot get the grid chase feature to work. I just uninstalled 2.10.8 and reinstalled it. Same

Laurie, Thanks, now I understand. I do LOTW sync daily or more often and now have done JTAlert scan log and will do so more often. Having lots of fun chasing grids in the ARRL International Grid

Thank You

Tim, Simple. Turn off all alert types (including CQ) except for the alerts your interested in. Then set the "Generate alerts for CQ only Callsigns" alert filter. JTAlert will then only

Rich, A grid will continue to be alerted until it is marked as no longer needed, that is it has been LoTW confirmed. You need to periodically sync DXKeeper with LoTW to get

Janny, The Band spots were temporarily disabled while an excessive load event was occurring on the Server, which has now been resolved. The Band spots displays have been working