Date   

locked Re: [Ham-Apps] Error message after saving to DXKeeper

Laurie, VK3AMA <groups03@...>
 

Hello Pat,

OK, looks like a syntax error in the code used to query the database to confirm that the QSO was correctly logged. The QSO is getting logged correctly as you discovered, it is just the confirmation message.

I suspect this is related to your Windows regional settings. Please, what is the version of Windows and the Regional Setting?

de Laurie, VK3AMA

On 18-October-2011 02:54, ON2AD wrote:
Hello Laurie, VK3AMA

After saving QSO I become three error messages:

here the 2 (same) error message:

1. Sorry, there appears to be an error!
err.description is : Syntaxisfout (komma) in query-expressie ('Mode'= JT65') AND ('Freq'=14,07658) AND ('QSO_Begin'=CDate('2011/10/17 14:09:00'))AND('Call'='IZ5TIZ').
err.windescription:
err.number is: 80020009
err.lastsllerror is: 0
err.scriptline is: -1
err.source is: Microsoft JET Database Engine
err.helpfile is:
err.helpcontext is: 5003000

I become this message two times and then the third message is:

JT-Alert QSO log - DXKeeper (in the heading)

(Red cross) FAILURE: QSO Not logged!
The QSO Data: Callsign: IZ5TIZ - Mode JT65 - Frequency: 14,07658
Note: The QSO is still saved to the JT65-HF Log File.

But the good news is that that QSO is saved in DXKeeper
Only I become those three erro
I use Win7 Professional 64 Bits


Hope you can solve this problem Laurie

73 de Pat ON2AD

PS: sorry for my bad English and type errors





------------------------------------

Yahoo!7 Groups Links




locked Re: [Ham-Apps] Database issue

Laurie, VK3AMA <groups03@...>
 

Hi Ron,

This should not happen.
If your HRD log is a MSAccess .mdb file and you still have the log that
was causing the error, please email it direct to me so I can
troubleshoot what is happening.

Until the cause is found I suggest you make a backup of your log before
trying to use the JT-Alert logging.

At this point it is unclear why that error is generated. I have been
logging to HRD Access, MySQL and MSSQL logs on a local PC and over a network to remote machines during tests and haven't seen this error. It
might be specific to your log and I will need to look at it. I will
walk-through the HRD components of my code today.

de Laurie, VK3AMA

On 18-October-2011 04:40, va7hz wrote:
Hi Laurie and the group, the issue I'm having is abit different from some of the others. First let me say I have latest versions of JT65-HF and JT-Alert Everything except the logging to HRD is working. When I would log a QSO it would write to the JT65_log.adi file and thats it no error message, no confirmation. So I moved the log file to the C:&#92;Temp&#92; directory and yes had the &#92; fix done previously. Now I get the confirmation that QSO was logged, but
here is where things go downhill I go and refresh my HRD log to see it and all my qso's in the log disappear. and this is the error message I get

10:19:22 Reload Error: Getting 2987 records -
10:19:22 Reload Error: SELECT COL_PRIMARY_KEY,COL_ADDRESS,COL_AGE,COL_A_INDEX,COL_ANT_AZ,COL_ANT_EL,COL_ANT_PATH,COL_ARRL_SECT,COL_BAND,COL_BAND_RX,COL_BIOGRAPHY,COL_CALL,COL_CHECK,COL_CLASS,COL_CNTY,COL_COMMENT,COL_CONT,COL_CONTACTED_OP,COL_CONTEST_ID,COL_COUNTRY,COL_CQZ,COL_DISTANCE,COL_DXCC,COL_EMAIL,COL_EQ_CALL,COL_EQSL_QSLRDATE,COL_EQSL_QSLSDATE,COL_EQSL_QSL_RCVD,COL_EQSL_QSL_SENT,COL_EQSL_STATUS,COL_FORCE_INIT,COL_FREQ,COL_FREQ_RX,COL_GRIDSQUARE,COL_HEADING,COL_IOTA,COL_ITUZ,COL_K_INDEX,COL_LAT,COL_LON,COL_LOTW_QSLRDATE,COL_LOTW_QSLSDATE,COL_LOTW_QSL_RCVD,COL_LOTW_QSL_SENT,COL_LOTW_STATUS,COL_MAX_BURSTS,COL_MODE,COL_MS_SHOWER,COL_MY_CITY,COL_MY_CNTY,COL_MY_COUNTRY,COL_MY_CQ_ZONE,COL_MY_GRIDSQUARE,COL_MY_IOTA,COL_MY_ITU_ZONE,COL_MY_LAT,COL_MY_LON,COL_MY_NAME,COL_MY_POSTAL_CODE,COL_MY_RIG,COL_MY_SIG,COL_MY_SIG_INFO,COL_MY_STATE,COL_MY_STREET,COL_NAME,COL_NOTES,COL_NR_BURSTS,COL_NR_PINGS,COL_OPERATOR,COL_OWNER_CALLSIGN,COL_PFX,COL_PRECEDENCE,COL_PROP_MODE,COL_PUBLIC_KEY,COL_QSLMSG,COL_QSLRDATE,COL_QSLSDATE,COL_QSL_RCVD,COL_QSL_RCVD_VIA,COL_QSL_SENT,COL_QSL_SENT_VIA,COL_QSL_VIA,COL_QSO_COMPLETE,COL_QSO_RANDOM,COL_QTH,COL_RIG,COL_RST_RCVD,COL_RST_SENT,COL_RX_PWR,COL_SAT_MODE,COL_SAT_NAME,COL_SFI,COL_SIG,COL_SIG_INFO,COL_SRX,COL_SRX_STRING,COL_STATE,COL_STATION_CALLSIGN,COL_STX,COL_STX_STRING,COL_SWL,COL_TEN_TEN,COL_TIME_OFF,COL_TIME_ON,COL_TX_PWR,COL_WEB,COL_USER_DEFINED_0,COL_USER_DEFINED_1,COL_USER_DEFINED_2,COL_USER_DEFINED_3,COL_USER_DEFINED_4,COL_USER_DEFINED_5,COL_USER_DEFINED_6,COL_USER_DEFINED_7,COL_USER_DEFINED_8,COL_USER_DEFINED_9,COL_CREDIT_GRANTED,COL_CREDIT_SUBMITTED FROM [TABLE_HRD_CONTACTS_V01] ORDER BY COL_TIME_ON DESC, COL_CALL DESC
10:19:22 Reload Error: Invalid character value for cast specification on column number 23 (COL_DXCC)
10:19:22 Reload Loaded 0/2987 records in 141 miliseconds, 0.0 records per second


Any ideas? Only way to get my log back is to recreate from backup
Ron VA7HZ


locked Re: [Ham-Apps] attachment

Laurie, VK3AMA <groups03@...>
 

The only way to post a screen-capture is to use an email client and format the message in html and include the image in your email. Unfortunately if posting via the web this cant be done. There is a Yahoo Groups setting that will allow the images via the web, but then users of email clients wont get the image. I have chosen to allow images using the email client method.

de Laurie, VK3AMA

On 18-October-2011 06:04, jgmags2000 wrote:
How do you add an attachment to a post? I want to add a screen shot.

73, KJ1J



------------------------------------

Yahoo!7 Groups Links




locked Re: [Ham-Apps] Error message after saving to DXKeeper

David Westbrook
 

Laurie -- looks like missing quote around the JT65 string value ...
Are those single quotes (as opposed to something different than the string literal quoting) around the column names correct? 
What's the purpose of the exact frequency match in there (as opposed to band match)?

(and is this even jt-alert generated sql, or something DXK's doing?)

--david
KJ4IZW

On Mon, Oct 17, 2011 at 11:54 AM, ON2AD <on2ad@...> wrote:
 

Hello Laurie, VK3AMA

After saving QSO I become three error messages:

here the 2 (same) error message:

1. Sorry, there appears to be an error!
err.description is : Syntaxisfout (komma) in query-expressie ('Mode'= JT65') AND ('Freq'=14,07658) AND ('QSO_Begin'=CDate('2011/10/17 14:09:00'))AND('Call'='IZ5TIZ').
err.windescription:
err.number is: 80020009
err.lastsllerror is: 0
err.scriptline is: -1
err.source is: Microsoft JET Database Engine
err.helpfile is:
err.helpcontext is: 5003000

I become this message two times and then the third message is:

JT-Alert QSO log - DXKeeper (in the heading)

(Red cross) FAILURE: QSO Not logged!
The QSO Data: Callsign: IZ5TIZ - Mode JT65 - Frequency: 14,07658
Note: The QSO is still saved to the JT65-HF Log File.

But the good news is that that QSO is saved in DXKeeper
Only I become those three erro
I use Win7 Professional 64 Bits

Hope you can solve this problem Laurie

73 de Pat ON2AD

PS: sorry for my bad English and type errors



locked Hamspots Message

John <john@...>
 

Hi Laurie.
Sorry for putting the message here but I'm not sure how else to contact you!

Just over a month ago I sent in a problem report for Hamspots complete with a screenshot. Did you get it & or was it filtered into the trash?

I realise you have many other things on at the moment but perhaps you could tell me if it arrived. It was addressed to vk3ama@hamspots.net

Apologies to other members for the OT message.

73,
John G4GCL


locked attachment

jgmags2000 <jgmags2000@...>
 

How do you add an attachment to a post? I want to add a screen shot.

73, KJ1J


locked Re: Trying to get JT-Alert to work with HRD logger

w7rjc
 

Hi de Laurie and Scott also

Thanks for the reply to my trouble with loginng records to HRD logger.

AS was suggested I checked out what method I was (am) using. It is the HRD V5 (access).

I have set the file path in JT-Alert to C:&#92;Users&#92;......HRD Logbook&#92;HRD My Logbook.mdb as scott said his was set.

I then wrote a file to it via HRD Logbook and it recorded it ok ..
atleast the "My logbook.mdb" file showed a change in the last time it was written to which matched the time i sent it.

I can also write a record to the JT65 log using the JT65 log button.

However I cannot get JT-Alert to write a record to HRD Log.

I have never gotten a Popup window.

Also the LotW upload in the HRD Logger screen is always Grayed out.
Is the normal?

When I installed HRD I did-not install it in the C: drive. I installed it in another drive. I has worked ok and still dose .. except for the problem.

Just remembered I have never been able to upload to LotW fro HRD .. I have ben using an upload utility by WD5AEA Which worked oK.

Let me know if yuo need more info. Thanks again for your Help.
Ray W7RJC

--- In Ham-Apps@yahoogroups.com.au, "Laurie, VK3AMA" <groups03@...> wrote:

Hi Ray,

You should get a popup window after logging, advising either success or
failure. If you are not getting any popup, then it sounds like you don't
have the correct path set for the Log file, or DSN if using MSSQL or MySQL.

You are correct, JT-Alert writes an entry to the HRD Log File (MS Access
.mdb file) or the HRD ODBC Database connection (if using MSSQL or
MySQL). If you are unclear on which method you are using you will need
to read the "HRD Logbook.pdf" that gets installed in the HRDV5 program
directory. Someone must have set your log up initially, most likely
using the standard MS Access .mdb file.

You need to determine what sort of log type your using and then either
set the file path under the "HRD V5 (Access)" section of the JT-Alert
config or set the appropriate ODBC DSN under the "HRD V5 (ODBC DSN)"
section of the JT-Alert config.

The log file of "plot log mapper.adi" is not correct, the extension
should be .mdb, the name will be what ever was used when initially
setting up you HRD log.

I'm hoping someone with HRD experience jumps in here to offer you some
more HRD instruction.

Let us know how you go

de Laurie, VK3AMA

On 17-October-2011 14:10, w7rjc wrote:
Hi all,

I have tryed most of the afternoon to get JT-Alert to work with HRD logger .. to no avail. I don't even get any nasty grams.
I have done the &#92; thing in JT65 as suggested.
Perhaps I don't understand it's purpose .. I am expecting it to write a record to the HRD logger file. Is that what it is suppose to do?
If not then what can I expect it to do? (maybe its working and I don'd know it.

I'm running HRD Ver. 5 2893 ; win7 home premiun 64Bit ; JT65 v.1.0.7

I'm also not sure about the file NAME and LOCATION of the HRD log file.I have been using "plot log mapper.adi" ... Is that correct?

Thanks for any and all help. Ray W7RJC


locked Database issue

va7hz <bctech58@...>
 

Hi Laurie and the group, the issue I'm having is abit different from some of the others. First let me say I have latest versions of JT65-HF and JT-Alert Everything except the logging to HRD is working. When I would log a QSO it would write to the JT65_log.adi file and thats it no error message, no confirmation. So I moved the log file to the C:&#92;Temp&#92; directory and yes had the &#92; fix done previously. Now I get the confirmation that QSO was logged, but
here is where things go downhill I go and refresh my HRD log to see it and all my qso's in the log disappear. and this is the error message I get

10:19:22 Reload Error: Getting 2987 records -
10:19:22 Reload Error: SELECT COL_PRIMARY_KEY,COL_ADDRESS,COL_AGE,COL_A_INDEX,COL_ANT_AZ,COL_ANT_EL,COL_ANT_PATH,COL_ARRL_SECT,COL_BAND,COL_BAND_RX,COL_BIOGRAPHY,COL_CALL,COL_CHECK,COL_CLASS,COL_CNTY,COL_COMMENT,COL_CONT,COL_CONTACTED_OP,COL_CONTEST_ID,COL_COUNTRY,COL_CQZ,COL_DISTANCE,COL_DXCC,COL_EMAIL,COL_EQ_CALL,COL_EQSL_QSLRDATE,COL_EQSL_QSLSDATE,COL_EQSL_QSL_RCVD,COL_EQSL_QSL_SENT,COL_EQSL_STATUS,COL_FORCE_INIT,COL_FREQ,COL_FREQ_RX,COL_GRIDSQUARE,COL_HEADING,COL_IOTA,COL_ITUZ,COL_K_INDEX,COL_LAT,COL_LON,COL_LOTW_QSLRDATE,COL_LOTW_QSLSDATE,COL_LOTW_QSL_RCVD,COL_LOTW_QSL_SENT,COL_LOTW_STATUS,COL_MAX_BURSTS,COL_MODE,COL_MS_SHOWER,COL_MY_CITY,COL_MY_CNTY,COL_MY_COUNTRY,COL_MY_CQ_ZONE,COL_MY_GRIDSQUARE,COL_MY_IOTA,COL_MY_ITU_ZONE,COL_MY_LAT,COL_MY_LON,COL_MY_NAME,COL_MY_POSTAL_CODE,COL_MY_RIG,COL_MY_SIG,COL_MY_SIG_INFO,COL_MY_STATE,COL_MY_STREET,COL_NAME,COL_NOTES,COL_NR_BURSTS,COL_NR_PINGS,COL_OPERATOR,COL_OWNER_CALLSIGN,COL_PFX,COL_PRECEDENCE,COL_PROP_MODE,COL_PUBLIC_KEY,COL_QSLMSG,COL_QSLRDATE,COL_QSLSDATE,COL_QSL_RCVD,COL_QSL_RCVD_VIA,COL_QSL_SENT,COL_QSL_SENT_VIA,COL_QSL_VIA,COL_QSO_COMPLETE,COL_QSO_RANDOM,COL_QTH,COL_RIG,COL_RST_RCVD,COL_RST_SENT,COL_RX_PWR,COL_SAT_MODE,COL_SAT_NAME,COL_SFI,COL_SIG,COL_SIG_INFO,COL_SRX,COL_SRX_STRING,COL_STATE,COL_STATION_CALLSIGN,COL_STX,COL_STX_STRING,COL_SWL,COL_TEN_TEN,COL_TIME_OFF,COL_TIME_ON,COL_TX_PWR,COL_WEB,COL_USER_DEFINED_0,COL_USER_DEFINED_1,COL_USER_DEFINED_2,COL_USER_DEFINED_3,COL_USER_DEFINED_4,COL_USER_DEFINED_5,COL_USER_DEFINED_6,COL_USER_DEFINED_7,COL_USER_DEFINED_8,COL_USER_DEFINED_9,COL_CREDIT_GRANTED,COL_CREDIT_SUBMITTED FROM [TABLE_HRD_CONTACTS_V01] ORDER BY COL_TIME_ON DESC, COL_CALL DESC
10:19:22 Reload Error: Invalid character value for cast specification on column number 23 (COL_DXCC)
10:19:22 Reload Loaded 0/2987 records in 141 miliseconds, 0.0 records per second


Any ideas? Only way to get my log back is to recreate from backup
Ron VA7HZ


locked Error message after saving to DXKeeper

ON2AD <on2ad@...>
 

Hello Laurie, VK3AMA

After saving QSO I become three error messages:

here the 2 (same) error message:

1. Sorry, there appears to be an error!
err.description is : Syntaxisfout (komma) in query-expressie ('Mode'= JT65') AND ('Freq'=14,07658) AND ('QSO_Begin'=CDate('2011/10/17 14:09:00'))AND('Call'='IZ5TIZ').
err.windescription:
err.number is: 80020009
err.lastsllerror is: 0
err.scriptline is: -1
err.source is: Microsoft JET Database Engine
err.helpfile is:
err.helpcontext is: 5003000

I become this message two times and then the third message is:

JT-Alert QSO log - DXKeeper (in the heading)

(Red cross) FAILURE: QSO Not logged!
The QSO Data: Callsign: IZ5TIZ - Mode JT65 - Frequency: 14,07658
Note: The QSO is still saved to the JT65-HF Log File.

But the good news is that that QSO is saved in DXKeeper
Only I become those three erro
I use Win7 Professional 64 Bits


Hope you can solve this problem Laurie

73 de Pat ON2AD

PS: sorry for my bad English and type errors


locked Re: [Ham-Apps] Re: B4 on other bands

Jerry Taylor
 

This is going to be an option correct and not a full functional change to how B4's are handled?  

If I've worked John WA3CAS on 20m, but now operating on 40m and see him calling CQ I only want to see him as B4 if I've worked him on 40m. Unless it is flagged or displayed in such a way that tells me I've worked him on another band but not the band I'm currently tuned to.  

I know some ops take issue with answering their CQ if they've already been worked. I'm not 100% sure of what drives this behavior, but do respect their decisions.  But I wouldn't think this would apply to a band not worked before. 

Jerry

Sent from my iPad

On Oct 17, 2011, at 7:12 AM, "JohnB" <brushj@...> wrote:

 

Hi Laurie,

That's exactly what I want to see happen. I want to see "B4" appear next to the call no matter what band I worked him on. I swear that feature was already available in v1.4.1. For me, it would be a welcomed addition to v1.5.

Thanks for all your hard work.

John (WA3CAS)


locked Re: B4 on other bands

JohnB
 

Hi Laurie,

That's exactly what I want to see happen. I want to see "B4" appear next to the call no matter what band I worked him on. I swear that feature was already available in v1.4.1. For me, it would be a welcomed addition to v1.5.

Thanks for all your hard work.

John (WA3CAS)


locked Re: Trying to get JT-Alert to work with HRD logger

Scott
 

Ray,

I'm using Win7 myself, and the path I needed to put in was this: C:&#92;Users&#92;owner&#92;AppData&#92;Roaming&#92;Simon Brown, HB9DRV&#92;HRD Logbook&#92;HRD My Logbook.mdb

I don't know if this will help or not.

73 Scott
KN3A

--- In Ham-Apps@yahoogroups.com.au, "w7rjc" <w7rjc@...> wrote:

Hi all,

I have tryed most of the afternoon to get JT-Alert to work with HRD logger .. to no avail. I don't even get any nasty grams.
I have done the &#92; thing in JT65 as suggested.
Perhaps I don't understand it's purpose .. I am expecting it to write a record to the HRD logger file. Is that what it is suppose to do?
If not then what can I expect it to do? (maybe its working and I don'd know it.

I'm running HRD Ver. 5 2893 ; win7 home premiun 64Bit ; JT65 v.1.0.7

I'm also not sure about the file NAME and LOCATION of the HRD log file.I have been using "plot log mapper.adi" ... Is that correct?

Thanks for any and all help. Ray W7RJC


locked Re: [Ham-Apps] Trying to get JT-Alert to work with HRD logger

Laurie, VK3AMA <groups03@...>
 

Hi Ray,

You should get a popup window after logging, advising either success or failure. If you are not getting any popup, then it sounds like you don't have the correct path set for the Log file, or DSN if using MSSQL or MySQL.

You are correct, JT-Alert writes an entry to the HRD Log File (MS Access .mdb file) or the HRD ODBC Database connection (if using MSSQL or MySQL). If you are unclear on which method you are using you will need to read the "HRD Logbook.pdf" that gets installed in the HRDV5 program directory. Someone must have set your log up initially, most likely using the standard MS Access .mdb file.

You need to determine what sort of log type your using and then either set the file path under the "HRD V5 (Access)" section of the JT-Alert config or set the appropriate ODBC DSN under the "HRD V5 (ODBC DSN)" section of the JT-Alert config.

The log file of "plot log mapper.adi" is not correct, the extension should be .mdb, the name will be what ever was used when initially setting up you HRD log.

I'm hoping someone with HRD experience jumps in here to offer you some more HRD instruction.

Let us know how you go

de Laurie, VK3AMA

On 17-October-2011 14:10, w7rjc wrote:
Hi all,

I have tryed most of the afternoon to get JT-Alert to work with HRD logger .. to no avail. I don't even get any nasty grams.
I have done the &#92; thing in JT65 as suggested.
Perhaps I don't understand it's purpose .. I am expecting it to write a record to the HRD logger file. Is that what it is suppose to do?
If not then what can I expect it to do? (maybe its working and I don'd know it.

I'm running HRD Ver. 5 2893 ; win7 home premiun 64Bit ; JT65 v.1.0.7

I'm also not sure about the file NAME and LOCATION of the HRD log file.I have been using "plot log mapper.adi" ... Is that correct?

Thanks for any and all help. Ray W7RJC


locked Trying to get JT-Alert to work with HRD logger

w7rjc
 

Hi all,

I have tryed most of the afternoon to get JT-Alert to work with HRD logger .. to no avail. I don't even get any nasty grams.
I have done the &#92; thing in JT65 as suggested.
Perhaps I don't understand it's purpose .. I am expecting it to write a record to the HRD logger file. Is that what it is suppose to do?
If not then what can I expect it to do? (maybe its working and I don'd know it.

I'm running HRD Ver. 5 2893 ; win7 home premiun 64Bit ; JT65 v.1.0.7

I'm also not sure about the file NAME and LOCATION of the HRD log file.I have been using "plot log mapper.adi" ... Is that correct?

Thanks for any and all help. Ray W7RJC


locked Re: [Ham-Apps] B4 on other bands

Laurie, VK3AMA <groups03@...>
 

Hi John,

So what you want is... say you have worked VK3AMA only on 20M, you are currently on 10M, VK3AMA is decoded on 10M calling CQ, you want that decode to show as a B4. Is that correct? If so, it is not currently possible unless the QRG in JT65-HF is set to zero, which I would see as undesirable if logging and or RBN spots are important to you.

Having said all that, I could add an option to JT-Alert to ignore the Band for B4 testing. Easy to do, it will be in the next release.

de Laurie, VK3AMA

On 17-October-2011 11:34, JohnB wrote:
Hi Laurie,

B4 alerts for stations worked on the current band is working great, but stations worked on other bands are not being flagged as worked B4.

There's a note in the Worked B4 configuration screen that says "If the QRG is not set in JT65-HF, and if the decoded Callsign previously worked, regardless of band, it will be flagged as worked B4."

I do want stations worked on other bands to be flagged as worked before, so what do I do to make this happen?

John (WA3CAS)


locked B4 on other bands

JohnB
 

Hi Laurie,

B4 alerts for stations worked on the current band is working great, but stations worked on other bands are not being flagged as worked B4.

There's a note in the Worked B4 configuration screen that says "If the QRG is not set in JT65-HF, and if the decoded Callsign previously worked, regardless of band, it will be flagged as worked B4."

I do want stations worked on other bands to be flagged as worked before, so what do I do to make this happen?

John (WA3CAS)


locked Re: [Ham-Apps] Re: JT-Alert 1.5.0 not logging to HRD

Laurie, VK3AMA <groups03@...>
 

Good to hear Larry.

I'm missing all the 10M action (actually every band except 30m) as my SteppIR is off the tower on the ground in preparation for a new SteppIR arriving next week. Early Christmas present to myself :-)

Cheers
de Laurie, VK3AMA

On 17-October-2011 10:06, larryinlima wrote:
Laurie,

Yes that fixed it. I missed that post I guess. Simple fix and now I'm getting the pop up saying success and the refresh logs the contact. Hey great work on this version, I love the new features. I set up my colors for the alerts which makes it easier to pick out things. Now back to 10 mtrs which has been open all day.

Larry
W8LIG

--- In Ham-Apps@yahoogroups.com.au, "Laurie, VK3AMA"<groups03@...> wrote:
Larry,

Are you receiving a popup message indicating that the logging had failed?
If not, then the most likely cause is the missing trailing backslash on
the JT65-HF log path (see my message titled "## IMPORTANT ## - Bug in
JT-Alert 1.5.0 logging").

de Laurie, VK3AMA

On 17-October-2011 06:38, larryinlima wrote:
Laurie,

Unlike the previous post on this, I have all the settings correct. However after three contact since downloading and installing this new version, none of the contacts were posted to my HRD logbbook. Using V5.0 build 2893, Windows7 Pro, JT65 v1.0.7. I installed JT-Alert in the Program Files directory. Any ideas I'll be happy to provide any info from my end as I'm looking forward to no longer having to do manual entry.

Larry
W8LIG


locked Re: JT-Alert 1.5.0 not logging to HRD

Larry Bryan
 

Laurie,

Yes that fixed it. I missed that post I guess. Simple fix and now I'm getting the pop up saying success and the refresh logs the contact. Hey great work on this version, I love the new features. I set up my colors for the alerts which makes it easier to pick out things. Now back to 10 mtrs which has been open all day.

Larry
W8LIG

--- In Ham-Apps@yahoogroups.com.au, "Laurie, VK3AMA" <groups03@...> wrote:

Larry,

Are you receiving a popup message indicating that the logging had failed?
If not, then the most likely cause is the missing trailing backslash on
the JT65-HF log path (see my message titled "## IMPORTANT ## - Bug in
JT-Alert 1.5.0 logging").

de Laurie, VK3AMA

On 17-October-2011 06:38, larryinlima wrote:
Laurie,

Unlike the previous post on this, I have all the settings correct. However after three contact since downloading and installing this new version, none of the contacts were posted to my HRD logbbook. Using V5.0 build 2893, Windows7 Pro, JT65 v1.0.7. I installed JT-Alert in the Program Files directory. Any ideas I'll be happy to provide any info from my end as I'm looking forward to no longer having to do manual entry.

Larry
W8LIG


locked Re: [Ham-Apps] Alert 1.5

Ron Brown <bctech58@...>
 

Nothing like that on my end decoding jt65 and RTTY CPU is only 4% and my computer is no powerhouse

73 Ron VA7HZ


On 2011-10-16, at 8:26, jgmags2000 <jgmags2000@...> wrote:

 

New version has slowed my computer to a crawl. Apps take inordinate time to load.. Windows 7 64 bit. Anyone else experiencing this?

73, John KJ1J


locked Re: LoTW glitch?

Scott
 

Dave,

Yes, I was using the external one. That was working up until last night. Now I'm not able to use the HRD Utilities to upload to LoTW, and I'm not able to upload from within the Logbook. Working on this with VA7HZ in Gtalk, and he said the logfile points to a permissions thing with my Win7. I am not clear on all this but I did grant permissions to all the programs. I installed TrustedQSL right at c:&#92;TrustedQSL. HRD is in the C:&#92;Program Files (x86)&#92;Amateur Radio&#92;Ham Radio Deluxe directory. I think I need to learn about administrator privileges. Ron looked at the logfile from a failed upload and determined that's the issue. I'm completely lost at this time. Long live WinXP!

Scott
KN3A

--- In Ham-Apps@yahoogroups.com.au, Dave Wright <hfradiopro@...> wrote:

Laurie,

I think that Scott's problem is that he is using the external HRD Utilities
rather than the HRD LoTW upload tool in HRD 5.

Dave
K3DCW

On Sun, Oct 16, 2011 at 4:27 PM, Laurie, VK3AMA <groups03@...> wrote:

**


Scott,

Maybe it is too early in the morning for me (still on first coffee), but
I don't understand this statement... "it doesn't tell me there is a QSO
not marked to be uploaded".

Are you saying that the QSO should be flagged for upload to LoTW and it
isn't? If so, I will need to have a look again at HRD and see if there
are additional QSL fields I can set.

de Laurie, VK3AMA

On 17-October-2011 07:09, Scott wrote:
I successfully am able to post to my HRD logbook, no problem at all. But,
when I bring up my HRD Utilities program after it's been received in the
log, it doesn't tell me there is a QSO not marked to be uploaded.

Any workaround for this?

Scott
KN3A



--
Dave
K3DCW
www.k3dcw.net

"Real radio bounces off of the sky"