Date   

locked Re: JTAlert - Worked B4 Working But Not Quite 100% #FT8

JTAlert Support (VK3AMA)
 

On 15/11/2021 7:54 am, A. Mark Gillespie (VK3BU) wrote:
Sorry, clicked on the wrong 3D2 station.

Here's what happens with 3D2USU.
_._,_._,_



There can be a number of reasons why the QSO History is not displaying results.
  • Not having a logger enabled in JTAlert.
  • JTAlert is looking at the wrong or empty log file.
  • Protection software interference preventing JTAlert from reading the log file.
  • In your example there are no FT8 QSOs with 3D2USU in your log.

What logger do you have enabled in JTAlert

Assuming you are using a log with JTAlert, are there any 3D2USU QSOs in that log recorded? If there are, for what mode?

de Laurie VK3AMA


locked Re: Wanted filter for other bands

Pawel Stobinski
 

Thanks, Laurie. Keeping fingers crossed :D

Paul, sq5nry


locked Re: JTAlert - Worked B4 Working But Not Quite 100% #FT8

A. Mark Gillespie (VK3BU)
 

Sorry, clicked on the wrong 3D2 station.

Here's what happens with 3D2USU.


locked Re: JTAlert - Worked B4 Working But Not Quite 100% #FT8

Joe Subich, W4TV
 

Worked B4 Operating Incorrectly In JTAlert
This is correct. Although you have worked 3D2USU, you apparently
have not worked 3D2TS.

73,

... Joe, W4TV


On 2021-11-14 2:25 AM, A. Mark Gillespie (VK3BU) wrote:
Hi All,
I've recently rediscovered the hobby and have just set up WSJT-X and JTAlert over the last couple of days. I'm currently only using QRZ.com for a log.
Everything seems to be working as it should, except for one aspect of JTAlert's worked B4 functionality.
I have worked 3D2USU once on two different bands. I'm getting grey a background on worked before stations in both WSJT-X and JTAlert, however when I right click on the worked B4 station in JTAlert and click on "Show QSO's History Popup", the popup states that it's not a worked B4 station.
It's all very odd since JTAlert does know that stations are worked before, but the "Show QSO's History Popup" alone doesn't seem to know about the worked B4 station.
Any ideas on how I can rectify the situation?
Thank you.
73 Mark
Worked B4 Operating Correctly In WSJT-X
Worked B4 Operating Correctly In JTAlert
Worked B4 Operating Incorrectly In JTAlert


locked Re: JTAlert misses some decodes from JTDX

JTAlert Support (VK3AMA)
 

On 12/11/2021 11:11 pm, Dwight Bosselman wrote:
As you said "If the original decode associated with a JTAlert callsign is no longer shown in JTDX than the callsign click event is ignored by JTDX."

FYI, this is also how WSJTX behaves.

de Laurie VK3AMA


locked Re: WSJTX & JTDX with JTAlert

JTAlert Support (VK3AMA)
 

On 14/11/2021 1:50 am, Pawel Stobinski wrote:

I wanted to have two WSJTXs + one JTDX instance running each with its JTAlert. I can get WSJTXs+JTAlerts alone working but then trying to start JTAlert for JTDX fails, as if it's not identifying the JTDX. And vice versa, JTAlert+JTDX started first work okay but then adding WSJTx is not successful. Is there a way to get such a set working well?

Best regards, Paul, sq5nry


Sorry, That's not possible.

I did some searching and found this note in the 2.10.0 release notes...
  Changes:

    - The multi-instance support has also been changed. Running multiple copies
       of JTAlert against both WSJT-X and JTDX simultaneously is not supported.
       You can run multiple instances of JTAlert against either WSJT-X OR JTDX
       only. Both types of applications can be running simultaneously on the PC,
       but only one JTAlert operating mode (against WSJT-X or JTDX) is allowed.

The above notes have been added to the JTAlert Help file, "Multiple Instances" topic for the next JTAlert release.

de Laurie VK3AMA


locked Re: JTAlert Chrome segfault

JTAlert Support (VK3AMA)
 

On 15/11/2021 4:36 am, Michael Black via groups.io wrote:
JTAlert seg faults with his Chrome browser when clicking the Q button.
I don't see any information in the debug logs that helps.
Changing his default browser to Edge fixes it....back to Chrome still seg faults.

Did the same on my system and Chrome (same version as his) works OK.

Can we maybe get some debug to find out what's going on?

Mike W9MDB

Nothing I can do. JTAlert doesn't know which browser is the Windows default. The code executed by JTAlert is identical for all browsers...
    If $call <> "" Then
        ShellExecute("http://www.qrz.com/db/" & $call)
    Else
        ShellExecute("http://www.qrz.com/")
    EndIf

The
ShellExecute is an inbuilt AutoIT function, there is no facility for additional debugging.

de Laurie VK3AMA


locked Re: Wanted filter for other bands

JTAlert Support (VK3AMA)
 

On 14/11/2021 2:04 am, Pawel Stobinski wrote:

Hello, I'd like to suggest a feature request. I'm using one WSJTX+JTAlert for SAT work and I found I cannot easily define Wanted DXCC. Highest built-in band is 2m however WSJTX is duly configured to report real RX band, in this case 3cm. Reconfiguring WSJTX to report in 2m band would perhaps solve the problem but I wouldn't like to resign from proper freq reporting.

Best regards, Paul, sq5nry


Paul,

Adding additional Bands outside the current hard-coded 160m -> 2m range is on my todo list. When that will be available is unknown.

de Laurie VK3AMA


locked Re: How to setup Alerts for grid squares?

JTAlert Support (VK3AMA)
 

On 14/11/2021 6:49 am, Herb Garcia wrote:
I'm having difficulty trying to setup alerts for wanted grid squares. Any advice>

Herb KM6JBI

What is not working for you?

Setting up which grids are wanted requires that the "Settings -> Rebuild Alert Database" menu is executed. There is not option to manually set/unset needed grids.



de Laurie VK3AMA
 


locked JTAlert Chrome segfault

Michael Black
 

Helping out Eli -- JTAlert seg faults with his Chrome browser when clicking the Q button.
I don't see any information in the debug logs that helps.
Changing his default browser to Edge fixes it....back to Chrome still seg faults.

Did the same on my system and Chrome (same version as his) works OK.

Can we maybe get some debug to find out what's going on?

Mike W9MDB



locked JTAlert - Worked B4 Working But Not Quite 100% #FT8

A. Mark Gillespie (VK3BU)
 

Hi All,
I've recently rediscovered the hobby and have just set up WSJT-X and JTAlert over the last couple of days. I'm currently only using QRZ.com for a log.
Everything seems to be working as it should, except for one aspect of JTAlert's worked B4 functionality.
I have worked 3D2USU once on two different bands. I'm getting grey a background on worked before stations in both WSJT-X and JTAlert, however when I right click on the worked B4 station in JTAlert and click on "Show QSO's History Popup", the popup states that it's not a worked B4 station.
It's all very odd since JTAlert does know that stations are worked before, but the "Show QSO's History Popup" alone doesn't seem to know about the worked B4 station.
Any ideas on how I can rectify the situation?
Thank you.
73 Mark

Worked B4 Operating Correctly In WSJT-X


Worked B4 Operating Correctly In JTAlert


Worked B4 Operating Incorrectly In JTAlert


locked Re: How to setup Alerts for grid squares?

Joe Subich, W4TV
 

Any advice
What difficulties? Without specifics, it is very difficult to provide
any advice beyond "Read the Help Files".

73,

... Joe, W4TV


On 2021-11-13 2:49 PM, Herb Garcia wrote:
I'm having difficulty trying to setup alerts for wanted grid squares. Any advice>
Herb KM6JBI


locked How to setup Alerts for grid squares?

Herb Garcia <hpgarcia70@...>
 

I'm having difficulty trying to setup alerts for wanted grid squares. Any advice>

Herb KM6JBI


locked Re: How to ignore country specific CQ's.

John K9EL
 

Joe - wow that was fast.   I did not play around enough with the settings in the Callsigns window and now I see it.   Thank you very much and it is working perfect now!!

73 John K9EL (and yes, of course I have DX Marathon alerts!!!)


locked Re: How to ignore country specific CQ's.

Joe Subich, W4TV
 

John,

I configure JTAlert's Callsigns Windows for:
1) "Main Panel" -> Decodes DX (this excludes [mainland] US stations)
2) Sub Panel 1 -> Alert DXCC ("needed" DXCC)
3) Sub Panel 2 -> Alert CQ Zone
4) Sub Panel 3 (if desired) -> Alert Marathon

When operating 6M, I change Sub Panel 2 or 3 to Alert Grid.

I think the Main Panel/Sub Panel 1 configuration would do what you
want.

73,

... Joe, W4TV

On 2021-11-13 12:36 PM, John K9EL wrote:
Perhaps the setting to do this is there, but I cannot seem to find it.
As I am primarily interested in DX, I would like to eliminate all CQ’s from USA stations from appearing in my Alert box.  It would also be great if there was a way to eliminate alerts from USA-USA QSOs.
Thank you.
73, John K9EL


locked Problems with JTAlert 2.5.7

eam1212003
 

I recently updated from a rather old version (2.2) on my Windows 10 PC. That version worked fine.
As required for neatest version, I set up Net 5 during installation process. Now Alerts work, but I cannot query QRZ XML. It is set up correctly under web services. Further when I click “Q” JTAlert shuts down. I also cannot bring up Support function under help. It will not connect.
Thanks in advance
Eli N6PF 


locked Re: Win11 issues

Jim Nuytens
 

Doesn’t matter if it’s W10 or W11. So many OEM systems like HP and Dell come with so much “venerial disease” bloatware it’s not funny.

My recommendation is if you buy one of these, you’re better off blowing away the drive and doing a clean, virgin Windows install. The system will run faster, better, and give you less headaches in general.


On Nov 13, 2021, at 12:37 PM, Joe <radio.wq6q@...> wrote:


Is your new computer a Dell by any chance?

In tracking down my long latency ISRs I found a Dell "user experience monitor" process that was the culprit.  After deleting all things Dell (Programs and Services ) all has been good.  But this was on W10.

Joe/WQ6Q


locked Re: Win11 issues

Joe
 

Is your new computer a Dell by any chance?

In tracking down my long latency ISRs I found a Dell "user experience monitor" process that was the culprit.  After deleting all things Dell (Programs and Services ) all has been good.  But this was on W10.

Joe/WQ6Q


locked How to ignore country specific CQ's.

John K9EL
 

Perhaps the setting to do this is there, but I cannot seem to find it.

 

As I am primarily interested in DX, I would like to eliminate all CQ’s from USA stations from appearing in my Alert box.  It would also be great if there was a way to eliminate alerts from USA-USA QSOs.

 

Thank you.

 

73, John K9EL

 


locked Wanted filter for other bands

Pawel Stobinski
 

Hello, I'd like to suggest a feature request. I'm using one WSJTX+JTAlert for SAT work and I found I cannot easily define Wanted DXCC. Highest built-in band is 2m however WSJTX is duly configured to report real RX band, in this case 3cm. Reconfiguring WSJTX to report in 2m band would perhaps solve the problem but I wouldn't like to resign from proper freq reporting.

Best regards, Paul, sq5nry

2841 - 2860 of 40358