Date   

locked Re: jtalert v 2.50.6 broke

Jim Tanis
 

Try a reboot.  I have that problem when I switch from FT8 to FT4 in WSJT .  A reboot restores function.  I don't seem to have that problem going the other way.

73 Jim NX0R - Hays, KS


On Tue, Sep 14, 2021 at 6:01 PM Mike Wilson <mwilson1946@...> wrote:

Installed 2.50.6 and now no display of calls, decode in wsjt-x ok. Went back to 2.50.5 and now it also will not displace the decodes from wsjt-x.

 

 

 

73 de KE5WCT

Mike Wilson

Sent from Mail for Windows 10

 

 


locked jtalert v 2.50.6 broke

Mike Wilson <mwilson1946@...>
 

Installed 2.50.6 and now no display of calls, decode in wsjt-x ok. Went back to 2.50.5 and now it also will not displace the decodes from wsjt-x.

 

 

 

73 de KE5WCT

Mike Wilson

Sent from Mail for Windows 10

 

 


locked Re: How do I stop DX Alert from sounding when a station (normally stateside) is calling DX

 

OK, Tnx Laurie.  I will check my settings some more.

Glenn
K4ZOT


locked B4 Behavior

Craig
 

I continue to struggle with getting B4 to behave accurately.  For example, I called VK6EI this evening on 30M FT8 based on JTAlert showing a not worked status. When the QSO was completed and logged with DXKeeper, my log showed that I have worked this station 5 times in 2021 on 30M FT8.  My JTAlert B4 settings are ALL unchecked.  Looking for guidance on this regularly occurring issue.  I am using V2.50.5  Thanks. 
--
Craig
NZ4CW


locked F5 chat window always "on top"

WB5JJJ - George
 

Running 2.50.6 and found that the chat box is now always on top.  That option is NOT checked and I even toggled it to make sure.  It also will NOT minimize as well.  I have to uncheck Position Locked so I could move it out of the way if I don't want to close it down with "x" all the time.  
--
73's
George - WB5JJJ
Hamshack Holine #4969


locked Re: Jtalert messaging

Jim Tanis
 

Mine is working fine with the new version too. 


On Tue, Sep 14, 2021, 7:00 AM kb2m@... <kb2mjeff@...> wrote:

Just sent a test message here to myself with new version and it worked with no issues or configuration changes...


73 Jeff kb2m



On 9/13/2021 9:35 PM, Jim Tanis wrote:
I tried to send one to myself (Didn't know that was possible)  But I did not get a response.  Is there some configuring to do on messaging?  It always worked before.


On Mon, Sep 13, 2021 at 8:32 PM HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:
On 14/09/2021 10:32 am, Jim Tanis wrote:
Is jtalert messaging working?  Sent several messages and no response. 

If working, is it backwards compatible?

73 Jim NX0R 

Messaging is working. You can test by sending a message to yourself.

   

The current Messaging is backwards compatible with older implementations, up to a point. What JTAlert version are you using?

de Laurie VK3AMA


locked Re: Jtalert messaging

kb2m@arrl.net
 

Just sent a test message here to myself with new version and it worked with no issues or configuration changes...


73 Jeff kb2m



On 9/13/2021 9:35 PM, Jim Tanis wrote:
I tried to send one to myself (Didn't know that was possible)  But I did not get a response.  Is there some configuring to do on messaging?  It always worked before.


On Mon, Sep 13, 2021 at 8:32 PM HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:
On 14/09/2021 10:32 am, Jim Tanis wrote:
Is jtalert messaging working?  Sent several messages and no response. 

If working, is it backwards compatible?

73 Jim NX0R 

Messaging is working. You can test by sending a message to yourself.

   

The current Messaging is backwards compatible with older implementations, up to a point. What JTAlert version are you using?

de Laurie VK3AMA


locked Re: Jtalert messaging

Jim Tanis
 

Working for me!  Thanks! 


On Mon, Sep 13, 2021, 8:52 PM Monty Wilson, NR0A <nr0a.monty@...> wrote:

Laurie has reported that a few people were having the problem you are having.  Because of that he just released 2.50.6 yesterday that includes a fix for this issue.

 

 

 

Monty, NR0A

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of Jim Tanis
Sent: Monday, September 13, 2021 08:34 PM
To: Support@hamapps.groups.io
Subject: Re: [HamApps] Jtalert messaging

 

2.50.5 is the version I am using

 

On Mon, Sep 13, 2021 at 8:32 PM HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:

On 14/09/2021 10:32 am, Jim Tanis wrote:

Is jtalert messaging working?  Sent several messages and no response. 

 

If working, is it backwards compatible?

 

73 Jim NX0R 


Messaging is working. You can test by sending a message to yourself.

   

The current Messaging is backwards compatible with older implementations, up to a point. What JTAlert version are you using?

de Laurie VK3AMA


locked Re: Jtalert messaging

Monty Wilson, NR0A
 

Laurie has reported that a few people were having the problem you are having.  Because of that he just released 2.50.6 yesterday that includes a fix for this issue.

 

 

 

Monty, NR0A

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of Jim Tanis
Sent: Monday, September 13, 2021 08:34 PM
To: Support@hamapps.groups.io
Subject: Re: [HamApps] Jtalert messaging

 

2.50.5 is the version I am using

 

On Mon, Sep 13, 2021 at 8:32 PM HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:

On 14/09/2021 10:32 am, Jim Tanis wrote:

Is jtalert messaging working?  Sent several messages and no response. 

 

If working, is it backwards compatible?

 

73 Jim NX0R 


Messaging is working. You can test by sending a message to yourself.

   

The current Messaging is backwards compatible with older implementations, up to a point. What JTAlert version are you using?

de Laurie VK3AMA


locked Re: Jtalert messaging

Jim Tanis
 

I must have had a bad install.  Installed the .6 version (Had the .5 one installed) and the problem went away.  A bad install is the only thing I can think of.  TNX es 73  Jim NX0R - Hays, KS


On Mon, Sep 13, 2021 at 7:32 PM Jim Tanis <jimnx0r@...> wrote:
Is jtalert messaging working?  Sent several messages and no response. 

If working, is it backwards compatible?

73 Jim NX0R 


locked Re: Jtalert messaging

Jim Tanis
 

I tried to send one to myself (Didn't know that was possible)  But I did not get a response.  Is there some configuring to do on messaging?  It always worked before.


On Mon, Sep 13, 2021 at 8:32 PM HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:
On 14/09/2021 10:32 am, Jim Tanis wrote:
Is jtalert messaging working?  Sent several messages and no response. 

If working, is it backwards compatible?

73 Jim NX0R 

Messaging is working. You can test by sending a message to yourself.

   

The current Messaging is backwards compatible with older implementations, up to a point. What JTAlert version are you using?

de Laurie VK3AMA


locked Re: Jtalert messaging

Jim Tanis
 

2.50.5 is the version I am using


On Mon, Sep 13, 2021 at 8:32 PM HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:
On 14/09/2021 10:32 am, Jim Tanis wrote:
Is jtalert messaging working?  Sent several messages and no response. 

If working, is it backwards compatible?

73 Jim NX0R 

Messaging is working. You can test by sending a message to yourself.

   

The current Messaging is backwards compatible with older implementations, up to a point. What JTAlert version are you using?

de Laurie VK3AMA


locked Re: Jtalert messaging

Jim Tanis
 

I got your message, but you apparently did not get the 2 I attempted to send back.


On Mon, Sep 13, 2021 at 8:32 PM HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:
On 14/09/2021 10:32 am, Jim Tanis wrote:
Is jtalert messaging working?  Sent several messages and no response. 

If working, is it backwards compatible?

73 Jim NX0R 

Messaging is working. You can test by sending a message to yourself.

   

The current Messaging is backwards compatible with older implementations, up to a point. What JTAlert version are you using?

de Laurie VK3AMA


locked Re: Jtalert messaging

JTAlert Support (VK3AMA)
 

On 14/09/2021 10:32 am, Jim Tanis wrote:
Is jtalert messaging working?  Sent several messages and no response. 

If working, is it backwards compatible?

73 Jim NX0R 

Messaging is working. You can test by sending a message to yourself.

   

The current Messaging is backwards compatible with older implementations, up to a point. What JTAlert version are you using?

de Laurie VK3AMA


locked Jtalert messaging

Jim Tanis
 

Is jtalert messaging working?  Sent several messages and no response. 

If working, is it backwards compatible?

73 Jim NX0R 


locked Re: V2.505 and worked B4

Craig
 

Laurie - I continue to struggle with getting B4 to behave accurately.  For example, I called VK6EI this evening on 30M FT8 based on JTAlert showing not worked before. When completed and logged with DXLab DXKeeper, my log is showing that I have worked this station 5 times in 2021 on 30M FT8.  My JTAlert B4 settings are ALL unchecked.  Can you provide me with some guidance on this regularly occurring issue.  I am using V2.50.5  Thank you. 


locked Re: How do I stop DX Alert from sounding when a station (normally stateside) is calling DX

JTAlert Support (VK3AMA)
 

On 14/09/2021 8:39 am, GLENN - K4ZOT wrote:
How do I stop DX Alert from voice sounding when a station (normally stateside) is just calling DX in their call?  I have looked everywhere and can not find the solution.

Any help appreciated.

Glenn
K4ZOT

JTAlert doesn't have and has never had a voiced Alert for stations calling CQ DX.

If it is the DXCC Alert that is being triggered that will be because the Country of the Alerting callsign is set as needed in JTAlert. The DXCC Alert does not trigger on the CQ direction word.

de Laurie VK3AMA


locked How do I stop DX Alert from sounding when a station (normally stateside) is calling DX

 
Edited

How do I stop DX Alert from voice sounding when a station (normally stateside) is just calling DX in their call?  I have looked everywhere and can not find the solution.

Any help appreciated.

Glenn
K4ZOT


locked Re: 09/12/2021 Database File Error

neil_zampella
 

FWIW ... when Laurie releases a new version, the Callsign Database is included in that download so there shouldn't be a reason to download it again.   

 

That said, he should be given some leeway as he's trying to work on the program, and maintain the websites at the same time :)

 

Neil, KN3ILZ


locked Re: 09/12/2021 Database File Error

Jerry
 

Looks like it’s fixed now.  Thanks!

3501 - 3520 of 40371