Date   

locked Callsign window actions not enabling WSJT "enable tx"

Jim Cary
 

When I double click on either a staton calling CQ or my call in the Callsign #1 window, the "Enable TX" button on WSJT-X does not activate.  I have the "callsign Options" wsjtx reply set to "double click"  But that doesn't seem to have any effect.  Tried "single click" but the same thing happens.

What am I doing wrong?

Jim
W2SM


locked Re: JTAlert Main Window not Visible SOLVED

Robie - AJ4F
 

The JTalert main screen issue was resolved by deleting the ini file and letting JTAlert regenerate it,


The issue of no communication between WSJT-X and JTAlert was intermittent an has not recurred after switching JTAlert & WSJT-X to multicast.


Thanks for all the assistance!

Robie - AJ4F 

On Tue, Aug 31, 2021, 9:46 PM Laurie, VK3AMA <hamapps.support@...> wrote:


On 1/09/2021 11:50 am, Robie - AJ4F wrote:
> Both WSJT-X and JTAlert are set up for unicast.

If you're using Unicast then it is likely that ACLog is seizing
exclusive control of the UDP port and preventing JTAlert from receiving
the UDP messages. Either turn off ACLog integration with WSJTX or switch
both WSJTX and ACLog to multicast, JTAlert automatically detects if
multicast is being used, but you need to ensure that the "Settings ->
WSJT-X UDP Multicast on loopback" menu is ticked. See the JTAlert "Help
-WSJTX UDP Setup" menu.

de Laurie VK3AMA









locked Re: Floating title bar?

John Miller K8UMF
 

Thanks Mike, it has been awhile since I used JTalert.

John


locked Re: Missing start menu with version 2.50.5

Raymond Mikula
 

ok, if I look at the task bar I do see two "notes"  The note that is shown in my attached screen capture does not activate the missing/floating window.  I do have four displays in use and have carefully searched all of them but there is no menu to be found.  I also include a screen capture of the tasks that are running.

Ray/W9NZ


On Sat, Sep 4, 2021 at 08:31 PM, Michael Black wrote:
The "menu at the top" is now a separate window.
It should be the 1st thing to come up followed shortly by the call window.
 
Hover over the JTAlert icon in the task bar and you should see the other window.
You might have to move it if it's off screen.


locked Re: SNR Not showing in Callsign window

Michael Black
 

That shows when your current QSO partner is also running JTAlert and has text message capability.

Mike W9MDB




On Sunday, September 5, 2021, 08:08:50 AM CDT, Neil Foster <archernf@...> wrote:


Mike....when the box marked Online is checked, what does that refer too? The LOTW and eQSL I understand
TNX and stay well     Neil    N4FN


locked Re: SNR Not showing in Callsign window

Neil Foster
 

Mike....when the box marked Online is checked, what does that refer too? The LOTW and eQSL I understand
TNX and stay well     Neil    N4FN


locked Re: Floating title bar?

Ron W3RJW
 

On Sat, Sep 4, 2021 at 04:33 PM, John Miller K8UMF wrote:
Not sure what I am doing wrong but the main window is separated from the title bar/options.
John,

The separate windows give you much flexibility in your screen layout. Here's just one example. You can still lock the JTAlert title bar to WSJT-x if you want to.


 
--
73
Ron, W3RJW

FTdx-5000, Timewave Navigator, WSJT-x 2.5.0, rc3 Improved, JTAlert 2.50.4, HRD Deluxe v6.7.0.357
FTdx-3000, SignaLink USB


locked Re: Floating title bar?

Michael Black
 

That's how it behaves now -- it's a separate window.
The floating bar is the old AutoIT code which will eventually disappear.

Maybe Laurie can confirm the future behavior...hope to see all those options in the new callsign menu rather than another window.

Mike W9MDB


On Saturday, September 4, 2021, 04:59:37 PM CDT, John Miller K8UMF <imtekms@...> wrote:


jtalertProblem.jpg
Here is the floating title bar problem.

Thank you!

John


On Sat, Sep 4, 2021 at 4:50 PM Michael Black via groups.io <mdblack98=yahoo.com@groups.io> wrote:
Can you post a screen shot of that?

Not clear what you're saying.

Mike W9MDB




On Saturday, September 4, 2021, 03:33:20 PM CDT, John Miller K8UMF <imtekms@...> wrote:


Not sure what I am doing wrong but the main window is separated from the title bar/options. It took a bit of playing around to get the .net stuff working but problem persists after uninstall/reinstall.

Thanks,

John


locked Re: Missing start menu with version 2.50.5

Michael Black
 

The "menu at the top" is now a separate window.
It should be the 1st thing to come up followed shortly by the call window.

Hover over the JTAlert icon in the task bar and you should see the other window.
You might have to move it if it's off screen.

Mike




On Saturday, September 4, 2021, 06:55:30 PM CDT, Raymond Mikula <rmikula@...> wrote:


I've upgraded from a prior version of Jtalert to version 2.50.5.  I get the "good news" NET 5 message.
I'm missing the menu at the top.  I've deleted and reinstalled JTalert.  Need some guidance as to how to trouble shoot this problem.  


locked Missing start menu with version 2.50.5

Raymond Mikula
 

I've upgraded from a prior version of Jtalert to version 2.50.5.  I get the "good news" NET 5 message.
I'm missing the menu at the top.  I've deleted and reinstalled JTalert.  Need some guidance as to how to trouble shoot this problem.  


locked Re: Floating title bar?

John Miller K8UMF
 

jtalertProblem.jpg
Here is the floating title bar problem.

Thank you!

John


On Sat, Sep 4, 2021 at 4:50 PM Michael Black via groups.io <mdblack98=yahoo.com@groups.io> wrote:
Can you post a screen shot of that?

Not clear what you're saying.

Mike W9MDB




On Saturday, September 4, 2021, 03:33:20 PM CDT, John Miller K8UMF <imtekms@...> wrote:


Not sure what I am doing wrong but the main window is separated from the title bar/options. It took a bit of playing around to get the .net stuff working but problem persists after uninstall/reinstall.

Thanks,

John


locked Re: Floating title bar?

Michael Black
 

Can you post a screen shot of that?

Not clear what you're saying.

Mike W9MDB




On Saturday, September 4, 2021, 03:33:20 PM CDT, John Miller K8UMF <imtekms@...> wrote:


Not sure what I am doing wrong but the main window is separated from the title bar/options. It took a bit of playing around to get the .net stuff working but problem persists after uninstall/reinstall.

Thanks,

John


locked New Computer installation No operator call sign box

Tom Harson
 

Hi

I just got a new computer and, installed 2.50. When I envoke the program for the first time, NO call sign box appears. I have tried a lot of things but I have not solved this issue. I have the same issue with version 2.16.16 and 2.16.17. Obviously need some help !

73 de Tom K5VJZ


locked Floating title bar?

John Miller K8UMF
 

Not sure what I am doing wrong but the main window is separated from the title bar/options. It took a bit of playing around to get the .net stuff working but problem persists after uninstall/reinstall.

Thanks,

John


locked Re: No sound and other issues

Gerry S
 

Thank you so much Laurie. It was off the screen. Also I had not reset a file path for the sounds.


Thank you for all you do for us.

73,

Gerry

K1NY


locked Re: SNR Not showing in Callsign window

Brad Garber
 

Thanks.  That worked.
73
Brad W1XI


locked Re: SNR Not showing in Callsign window

Michael Black
 

Click the gear icon in the lower right corner.

Then in the popup box check dB

Inline image

Mike W9MDB



On Saturday, September 4, 2021, 11:45:36 AM CDT, Brad Garber <btgarber@...> wrote:


The SNR is no longer showing in the callsign boxes in the callsign window. How can I get it to show again?
Thanks


locked SNR Not showing in Callsign window

Brad Garber
 

The SNR is no longer showing in the callsign boxes in the callsign window. How can I get it to show again?
Thanks


locked Re: No sound and other issues

JTAlert Support (VK3AMA)
 

On 4/09/2021 6:27 am, Gerry S via groups.io wrote:
I am not seeing the main window.. Don't know why.   Just a window with Callsigns #1

That is my issue I see

Tks
gerry

The Callsigns window is controlled by the JTAlertV2.Manager.exe process and that process is started by the main JTAlert.exe process which is also the main window. So for the Callsigns window to be visible the main JTAlert window would have had to be started.

There should be an entry for the main window in the Windows taskbar, is that visible? There should be an entry with a name starting with "JTAlert 2.50.0" eg.
    

If there is a taskbar entry, either the main window is off screen, a Google search on "Windows recover off-screen window" will give you instruction for recovering from this very common Windows problem, or the JTAlert window is being po9stiion off screen by WSJTX if you have the JTAlert window docked to WSJTX, and the WSJTX window is positioned near to the screen edge drag the WSJTX window up or down the screen to bring JTAlert into view then once the JTAlert menu is visible turn off the docking.

If there is no taskbar entry for JTAlert, check taskmanager and see if the JTAlert.exe process is running. Under normal operation there should be 2 JTAlert named entries, JTAlert.exe and JTAlertV2.Manager.exe. If JTAlert.exe is not running, don't try starting JTAlert again unless you kill the JTAlertV2.Manager process first. I recommend a Windows restart to ensure any JTAlert processes and file locks are cleared.

If still no joy, it is likely that the JTAlert.exe process is being force killed by your PC Protection software which would account for the JTAlertV2.Manager to be left running as it is normally closed automatically when JTAlert closes. You may have to flag JTAlert and its directories as safe.

de Laurie VK3AMA


locked enhancement request

Joe
 

Laurie:

In the new version of JTAlert (2.50.5), I note that for some windows, like the Decodes window, it makes sense to clear the panel after each decode, while for others, like the Callers panel, one can set the persistence of the information shown in that panel, from "no auto clear" down to 1 minute.  I would like to be able to set this same parameter for clearing the DXCC Alert window, so that I can see, what DX I might have missed while I was away from my station.  This is valuable information in that it lets you know, especially over a few days, when a DX entity was being decoded at your station.  Is there already a way to do this, or would this be a reasonable thing to add??

When I initially saw the drop down box with "Callers (own call alert)" I thought this was going to be a drop down that allowed me to select a panel for configuration.  Changing it so that it does, in fact, work that way doesn't seem like a major change, but I fully realize it may be more difficult that it appears, and/or, the priority of such a modification might be so far down the list as to be not likely in the near future.  Alternatively, and maybe even better, would be a separate window that simply captured every (time stamped) DXCC alert until cleared, if enabled.

Should I get my hopes up ;-)

3041 - 3060 of 39820