Date   

locked Re: Windows Defender Indicates a Trojan in JTAlert 2.50.4

Michael Black
 

Antivirus removed it.
Reinstall

Make an exclusion for the JTAlert program folder.

Mike




On Sunday, July 18, 2021, 11:24:49 AM CDT, Tim Thorson <kd6hof@...> wrote:


FYI

upon restart:

image.png

73, Tim  KD6HOF



On Sun, Jul 18, 2021 at 9:01 AM Tim Thorson via groups.io <kd6hof=gmail.com@groups.io> wrote:
Laurie,

I Just got hit too...

I'm running:
image.png
 See capture below:

image.png

all was fine then...

This happened as soon as I went to setting (manage settings) F2

This may render the app DOA for users -

My 'Device Specs':

image.png
image.png

Included txt file for Operating State

73, Tim  KD6HOF



On Sun, Jul 18, 2021 at 6:43 AM Paul <VE3PS@...> wrote:

Laurie,

I downloaded the latest 64-bit JTAlert version this morning and installed it.  I launched the app and clicked on Settings at which time Windows Defender notified me of a threat.  When I investigated, I found the following:

Although I know you are very careful to confirm that your files are clean, because it is a ‘named threat’ (i.e., not ‘generic’), I thought I should mention it to you in case others have experienced the same ‘issue’.

FYI, this is my Windows info and latest Defender update status:

 

73…  Paul (VE3PS)


locked Re: Windows Defender Indicates a Trojan in JTAlert 2.50.4

Tim Thorson
 

FYI

upon restart:

image.png

73, Tim  KD6HOF



On Sun, Jul 18, 2021 at 9:01 AM Tim Thorson via groups.io <kd6hof=gmail.com@groups.io> wrote:
Laurie,

I Just got hit too...

I'm running:
image.png
 See capture below:

image.png

all was fine then...

This happened as soon as I went to setting (manage settings) F2

This may render the app DOA for users -

My 'Device Specs':

image.png
image.png

Included txt file for Operating State

73, Tim  KD6HOF



On Sun, Jul 18, 2021 at 6:43 AM Paul <VE3PS@...> wrote:

Laurie,

I downloaded the latest 64-bit JTAlert version this morning and installed it.  I launched the app and clicked on Settings at which time Windows Defender notified me of a threat.  When I investigated, I found the following:

Although I know you are very careful to confirm that your files are clean, because it is a ‘named threat’ (i.e., not ‘generic’), I thought I should mention it to you in case others have experienced the same ‘issue’.

FYI, this is my Windows info and latest Defender update status:

 

73…  Paul (VE3PS)


locked Re: Decodes window: View->Clear Display has no effect

Don, K4GO
 

YES!!!

That fixed it and again, thank you very much for such a wonderful piece of software.

73  Don  K4GO


locked Re: Windows Defender Indicates a Trojan in JTAlert 2.50.4

Tim Thorson
 

Laurie,

I Just got hit too...

I'm running:
image.png
 See capture below:

image.png

all was fine then...

This happened as soon as I went to setting (manage settings) F2

This may render the app DOA for users -

My 'Device Specs':

image.png
image.png

Included txt file for Operating State

73, Tim  KD6HOF



On Sun, Jul 18, 2021 at 6:43 AM Paul <VE3PS@...> wrote:

Laurie,

I downloaded the latest 64-bit JTAlert version this morning and installed it.  I launched the app and clicked on Settings at which time Windows Defender notified me of a threat.  When I investigated, I found the following:

Although I know you are very careful to confirm that your files are clean, because it is a ‘named threat’ (i.e., not ‘generic’), I thought I should mention it to you in case others have experienced the same ‘issue’.

FYI, this is my Windows info and latest Defender update status:

 

73…  Paul (VE3PS)


locked Re: Decode Keywords - Help button doesn't work

Joe Subich, W4TV
 

Correct ... like Keywords, Directed CQ is a recent addition and
Laurie has not written the help topic.

73,

... Joe, W4TV

On 2021-07-18 10:46 AM, Jim Reisert AD1C wrote:
Help doesn't work in the Directed CQ window either.
My program is installed in: E:\JTAlert
On Sun, Jul 18, 2021 at 8:44 AM Jim Reisert AD1C <jjreisert@...>
wrote:

I'm in the Decode Keywords window. The Help button does not work:

Can’t reach this page

- Make sure the web address //ieframe.dll/dnserrordiagoff.htm# is
correct


[image: JTAlertSettings_2021-07-18_08-44-35.png]
--
Jim Reisert AD1C, <jjreisert@...>, https://www.ad1c.us
<http://www.ad1c.us>


locked Re: Decode Keywords - Help button doesn't work

Joe Subich, W4TV
 

There is no help page for "Decode Keywords" ... look into
Help -> Settings -> Alerts -> Miscellaneous Alerts and you
will find that "Decode Keywords" is not present (not written).

What information are you seeking?

73,

... Joe, W4TV

On 2021-07-18 10:44 AM, Jim Reisert AD1C wrote:
I'm in the Decode Keywords window. The Help button does not work:
Can’t reach this page
- Make sure the web address //ieframe.dll/dnserrordiagoff.htm# is
correct
[image: JTAlertSettings_2021-07-18_08-44-35.png]


locked Re: Confirmed Band Window not Opening

Joe Subich, W4TV
 

Do you have "Show Log Fields" enabled in the Main window? Shown
Confirmed Bands is part of the Main Window that only appears if
"Show Log Fields" is enabled.

73,

... Joe, W4TV

On 2021-07-18 9:46 AM, Greg Foster wrote:
I am running ver. 2.50.4 and the Confirmed Band window is not opening. I am
using "Standard ADIF File" to log and when I open JTAlert the file is
scanned (25K+ records) Yet the window does not open. When I go into
View>Show Confirmed Bands there is a check mark beside Enable and a "dot"
beside Callsign but everything is greyed out. This use to work, what have I
done?
Greg Foster
VE3PJ
Cell 613-328-6538


locked Re: Decode Keywords - Help button doesn't work

Jim Reisert AD1C
 

Help doesn't work in the Directed CQ window either.

My program is installed in:   E:\JTAlert

On Sun, Jul 18, 2021 at 8:44 AM Jim Reisert AD1C <jjreisert@...> wrote:
I'm in the Decode Keywords window. The Help button does not work:

Can’t reach this page
  • Make sure the web address //ieframe.dll/dnserrordiagoff.htm# is correct

JTAlertSettings_2021-07-18_08-44-35.png
--
Jim Reisert AD1C, <jjreisert@...>, https://www.ad1c.us


--
Jim Reisert AD1C, <jjreisert@...>, https://www.ad1c.us


locked Decode Keywords - Help button doesn't work

Jim Reisert AD1C
 

I'm in the Decode Keywords window. The Help button does not work:

Can’t reach this page
  • Make sure the web address //ieframe.dll/dnserrordiagoff.htm# is correct

JTAlertSettings_2021-07-18_08-44-35.png
--
Jim Reisert AD1C, <jjreisert@...>, https://www.ad1c.us


locked Confirmed Band Window not Opening

Greg Foster
 

I am running ver. 2.50.4 and the Confirmed Band window is not opening. I am using “Standard ADIF File” to log and when I open JTAlert the file is scanned (25K+ records) Yet the window does not open. When I go into View>Show Confirmed Bands there is a check mark beside Enable and a “dot” beside Callsign but everything is greyed out. This use to work, what have I done?

 

 

Greg Foster

VE3PJ

Cell   613-328-6538

 


locked Windows Defender Indicates a Trojan in JTAlert 2.50.4

Paul
 

Laurie,

I downloaded the latest 64-bit JTAlert version this morning and installed it.  I launched the app and clicked on Settings at which time Windows Defender notified me of a threat.  When I investigated, I found the following:

Although I know you are very careful to confirm that your files are clean, because it is a ‘named threat’ (i.e., not ‘generic’), I thought I should mention it to you in case others have experienced the same ‘issue’.

FYI, this is my Windows info and latest Defender update status:

 

73…  Paul (VE3PS)


locked Re: Requests for ADIF files

Willi Passmann
 

Willi,

I am unable to test Lo4OM v1, there is something wrong with my install. I did check Log4OM v2 and it correctly logged both the QSO_DATE and QSO_DATE_OFF.

What WSJT-X is logging.


What was logged by Log4OM v2.


Laurie,

here are screenshots of a log, from JTDX and Log4OM v1.41.0.0.
Note the missing check mark for QSO end date in Log4OM.

This is missing since an update some weeks ago, but I don't recall which one.

vy 73,
Willi, DJ6JZ


locked Re: Decodes Window no longer populates.

JTAlert Support (VK3AMA)
 

On 18/07/2021 11:39 am, Don, K4GO wrote:
The Decodes window is present, but remains blank of data - it does not populate.  It did earlier today but not now. 

Icom 756 Pro2,  Windows 10,  8th Gen i7, HRD 6.7.0.357, WSJT-X v2.2.2

Looked at recent posts but could not find this problem.  Was at v 2.50.2 - upgraded to 2.50.4 today to see if that solved the problem.  No joy.
Have restarted program and restarted Windows, no joy.
I hope this is just an incorrect setting . . .

Thanks and 73  --  Don  K4GO

See this message https://hamapps.groups.io/g/Support/message/36296

de Laurie VK3AMA


locked Decodes Window no longer populates.

Don, K4GO
 

Been using this wonderful program for quite a while now, and this is the first problem I've had to write about.  The Decodes window is present, but remains blank of data - it does not populate.  It did earlier today but not now. 

Icom 756 Pro2,  Windows 10,  8th Gen i7, HRD 6.7.0.357, WSJT-X v2.2.2

Looked at recent posts but could not find this problem.  Was at v 2.50.2 - upgraded to 2.50.4 today to see if that solved the problem.  No joy.
Have restarted program and restarted Windows, no joy.
I hope this is just an incorrect setting . . .

Thanks and 73  --  Don  K4GO


locked Re: Requests for ADIF files

JTAlert Support (VK3AMA)
 

On 17/07/2021 7:29 pm, Willi Passmann wrote:

Laurie,

I am using Log4OM v1.41.0.0 and this version does not get QSO_DATE_OFF data.

I noticed that some weeks ago and since then I started to add this data manually.

vy 73,
Willi,DJ6JZ


Willi,

I am unable to test Lo4OM v1, there is something wrong with my install. I did check Log4OM v2 and it correctly logged both the QSO_DATE and QSO_DATE_OFF.

What WSJT-X is logging.


What was logged by Log4OM v2.


In JTAlert the logging code for Log4 v1 and v2 is identical (just a copy and paste), it is simply ADIF encoded text. JTAlert is sending both QSO_DATE fields for Log4 v1 and v2. It looks to me like
the problem is with Log4 v1.

de Laurie VK3AMA


locked Re: Alert on log to DX Keeper not working (2.50.4)

JTAlert Support (VK3AMA)
 

On 18/07/2021 1:57 am, Rick Boswell wrote:
in previous versions, an audio alert was sounded to confirm a successful log entry to DX Keeper. With 2.50.4, this seems to have disappeared. The pop up boxes are as before and logging is correct but no alert audio is heard; other audio alerts are working as expected. I have looked multiple times at the various alert settings and also at the DXK Config setting and Help files but not seeing a way to enable/disable this alert. What am I missing?

Thanks,
Rick
K8EZB

Look under the "Alerts -> Miscellaneous Alerts -> Windows Notifications" section of the main JTAlert Settings window.

   

Make sure the "Enable" checkbox is ticked, top left corner of that Settings section.


de Laurie VK3AMA


locked Alert on log to DX Keeper not working (2.50.4)

Rick Boswell
 

Much was not working for me in 2.50.3, as many others have reported. Installing 2.50.4 corrected all issues I have tested so far except one: in previous versions, an audio alert was sounded to confirm a successful log entry to DX Keeper. With 2.50.4, this seems to have disappeared. The pop up boxes are as before and logging is correct but no alert audio is heard; other audio alerts are working as expected. I have looked multiple times at the various alert settings and also at the DXK Config setting and Help files but not seeing a way to enable/disable this alert. What am I missing?

Thanks,
Rick
K8EZB


locked Re: Is there an update order of priority for upgrading programs ?

Jim N6VH
 

On 7/16/2021 11:51 PM, Bob Frostholm wrote:
Hi Jim,

I upgraded WSJT-X and JTAlert  and all seems to work fine.

73

Bob

Ko6Lu
Bob,

Great! Glad it's working for you now.

73,

Jim N6VH


locked Re: Requests for ADIF files

Willi Passmann
 

Am 17.07.2021 um 02:19 schrieb HamApps Support (VK3AMA):
This is due to the logging code for the affected loggers being written back when WSJT-X did not record Date & Time off data. Log4OM was not affected as the JTAlert code for it was written when WSJT-X was  providing the Date & Time off data.

Laurie,

I am using Log4OM v1.41.0.0 and this version does not get QSO_DATE_OFF data.

I noticed that some weeks ago and since then I started to add this data manually.

vy 73,
Willi,DJ6JZ


locked Re: Is there an update order of priority for upgrading programs ?

Bob Frostholm
 

Hi Jim,

I upgraded WSJT-X and JTAlert  and all seems to work fine.

73

Bob

Ko6Lu

On 7/16/2021 11:59 AM, Jim N6VH via groups.io wrote:

On 7/15/2021 8:23 PM, Bob Frostholm wrote:
Based on what you said, I'm guessing that you have "Enable Standard ADIF File Logging" checked in JTAlert.

Yes

If so, that is the log that JTAlert will scan when you do a database rebuild. JTAlert doesn't scan the WSJT-X log when doing a rebuild. In that case, there won't be any QSL / LOTW confirmations listed in that file (or the WSJT-X file, for that matter). Since your database rebuild shows grid that aren't needed, I assume that you have "No QSL Confirmation (Any Worked Station)" checked in the Rebuild screen. Is that correct?

Yes

73

Bob

Ko6Lu
Bob,

Thanks for the info. Based on what you have said, the worked grids should show up immediately after doing a "Rebuild Alert Database" process. Since that isn't happening, something is wrong. Also, just closing and restarting JTAlert (and WSJT-X) shouldn't have any effect on the not-needed grids. That would only be done by the "Rebuild Alert Database" process.

Have you upgraded WSJT-X and JTAlert yet? If so, did that make a difference.

How long does the database rebuild process take? Since you have an SSD, it should be fairly quick. For example, I have over 60,00 QSO's in my Log4OM log, and it only takes a little over a minute to do the rebuild. I realize this is a very different database structure than the adif you use, but it should still be a fairly short amount of time.

Incidentally, if you don't care about whether or not the QSOs are confirmed, you can check the box in the Grid Alert screen that says "Auto clear triggered Alert entity after logging" (see attached picture). I use that for the Marathon alert, and it works fine. It would still be a good idea to get the rebuild process working, though, since you might decide later to have various confirmations (LOTW, etc) as criteria for scanning.

73,

Jim N6VH






--
Bob
KO6LU

4241 - 4260 of 40371