Date   

locked Re: JTAlert 2.50.3

daniel lavocat
 

Ok Joe
Many thanks
73

Envoyé de mon iPhone

Le 13 juil. 2021 à 23:33, Joe Subich, W4TV <lists@subich.com> a écrit :


I meant white not blank Sorry 😉
The backgrounds are set in JTAlert's Main window -> Settings for
each alert individually. In the "Alert Color" box, click the
"Set Background" box. White is the color in the lower right
corner of the "Basic Colors" array.

73,

... Joe, W4TV


On 2021-07-13 4:57 PM, daniel lavocat wrote:
Hello
Ok Joe I understood ...
<There is no "blank" background.’s >
I meant white not blank Sorry 😉
Envoyé de mon iPhone
Le 13 juil. 2021 à 21:18, Joe Subich, W4TV <lists@subich.com> a écrit :
On 2021-07-13 11:45 AM, daniel lavocat wrote:

I saw that but it's not the same as this picture on the website
That is an old version (2.50.0, IIRC). There have been many
changes/improvements since then.

And How Can I have the background color as blank ?
There is no "blank" background.

73,

... Joe, W4TV


On 2021-07-13 11:45 AM, daniel lavocat wrote:
No problem Joe
I saw that but it's not the same as this picture on the website
And How Can I have the background color as blank ?
I cannot reproduce exactly as shown in this image taken from JTAlert's website ...
I can not
--
Daniel
https://F6FLU.org
Joe Subich, W4TV a écrit le 13/07/2021 à 17:34 :


Thanks for your answer but on the Badges settings it's only for
Badges ( CQ / 73) not for the LOTW / eQSL
Sorry, "Callsigns" (Settings -> Callsigns)

73,

... Joe, W4TV


On 2021-07-13 10:30 AM, daniel lavocat wrote:
Ji Joe
Thanks for your answer but on the Badges settings it's only for Badges ( CQ /
73) not for the LOTW / eQSL
I don't see how to use the "triangle"
Thanks and 73
--
Daniel
https://F6FLU.org




Joe Subich, W4TV a écrit le 13/07/2021 à 16:16 :

What you want is no longer possible. The upper/lower left/right
triangles have been *replaced* by user selected symbols. See:
Callsign Window -> Settings -> Badges

73,

... Joe, W4TV


On 2021-07-13 9:48 AM, daniel lavocat wrote:
Hi

no one know how to do?

F6FLU
Envoyé de mon iPad

Le 13 juil. 2021 à 10:39, daniel lavocat <F6FLU@gmx.com> a écrit :


Hello
I would like to have the same presentation as in the documentation like this:



i.e. having the small triangles as at the bottom left or right.

I don't see how to display triangles.
In fact I would like to display a triangle at the bottom left if LOTW ; a triangle at the bottom right if eQSL; is it possible ?

Because currently the LOTW and eQSL symbols are only displayed at the top right.

I would like to keep this position at the top right only for stations which are "ON-LINE".
Thank you for your help.

For example here I have :



73


--
Daniel
https://F6FLU.org







locked Re: JTAlert 2.50.3

daniel lavocat
 

Ok Laurie
It’s very clear for me now...
Many thanks for your answer
73

Envoyé de mon iPhone

Le 13 juil. 2021 à 23:18, Laurie, VK3AMA <hamapps.support@...> a écrit :



On 13/07/2021 6:39 pm, daniel lavocat wrote:
Hello
I would like to have the same presentation as in the documentation like this:


i.e. having the small triangles as at the bottom left or right.

I don't see how to display triangles.
In fact I would like to display a triangle at the bottom left if LOTW ; a triangle at the bottom right if eQSL; is it possible ?

Because currently the LOTW and eQSL symbols are only displayed at the top right.

I would like to keep this position at the top right only for stations which are "ON-LINE".
Thank you for your help.


73

--
Daniel
https://F6FLU.org

Sorry, That image on the HamApps website is old and will be getting replaced.

The old QSL flags are no longer available. The have been replaced by user-settable symbols, at last count there are 17 different symbols to choose from. The symbols are now grouped together and are always visible, something that was a problem with the old flags in the bottom corners when the display was set to not show the Country. The CQ/73/DX badge would obscure one of the QSL flags.

The change to symbols, grouped in an unobstructed area of the display was done as there is a future need for an additional symbol, bring the count to 4 making it impossible to display all symbols in individual corners of the display without 1 or 2 being obscured by the Badge image.

The only way to get the QSL flags and their positioning back is to downgrade JTAlert to version 2.50.0

de Laurie VK3AMA


locked Re: Callsign window gone after update to 2.5.3

W9WO
 

Hello Laurie
 
 I've confirmed that I have windows 10 64 bit and I downloaded The .net 5.0 64 bit desktop version as instructed from the top of the JTAlert download page. Yes some of the other star icon options would open but very slow to do so. I can't remember which ones would open. I've been lost without JTAlert and with the 6 meter band being open here today I reverted back to version 2.50.0 and now have my callsign window back and working.
My antivirus is Kaspersky Total Security and has never been a problem with JTAlert. I looked and cannot see where it has blocked anything required with the new .net file and JTAlert 2.50.3. So I'm still at a loss?? 
Thanks for your assistance in hopefully resolving my issue.
 
73,
Darrell W9WO
 


locked Re: 2.50.3 problems

Dave Miller
 

Hi, I'm having the same problem as Chris. It keeps installing as 32 bit instead of 64 bit. The start menu says it is 64 bit but task manager says 32 bit. I am installing on a new PC with a new C: drive so not sure how this is happening. Nothing is working. I have the 64 bit Net Framework.

Thanks
Dave G6AWF


locked Re: JTAlert 2.50.3

Joe Subich, W4TV
 

I meant white not blank Sorry 😉
The backgrounds are set in JTAlert's Main window -> Settings for
each alert individually. In the "Alert Color" box, click the
"Set Background" box. White is the color in the lower right
corner of the "Basic Colors" array.

73,

... Joe, W4TV


On 2021-07-13 4:57 PM, daniel lavocat wrote:
Hello
Ok Joe I understood ...
<There is no "blank" background.’s >
I meant white not blank Sorry 😉
Envoyé de mon iPhone

Le 13 juil. 2021 à 21:18, Joe Subich, W4TV <lists@subich.com> a écrit :

On 2021-07-13 11:45 AM, daniel lavocat wrote:

I saw that but it's not the same as this picture on the website
That is an old version (2.50.0, IIRC). There have been many
changes/improvements since then.

And How Can I have the background color as blank ?
There is no "blank" background.

73,

... Joe, W4TV


On 2021-07-13 11:45 AM, daniel lavocat wrote:
No problem Joe
I saw that but it's not the same as this picture on the website
And How Can I have the background color as blank ?
I cannot reproduce exactly as shown in this image taken from JTAlert's website ...
I can not
--
Daniel
https://F6FLU.org
Joe Subich, W4TV a écrit le 13/07/2021 à 17:34 :


Thanks for your answer but on the Badges settings it's only for
Badges ( CQ / 73) not for the LOTW / eQSL
Sorry, "Callsigns" (Settings -> Callsigns)

73,

... Joe, W4TV


On 2021-07-13 10:30 AM, daniel lavocat wrote:
Ji Joe
Thanks for your answer but on the Badges settings it's only for Badges ( CQ /
73) not for the LOTW / eQSL
I don't see how to use the "triangle"
Thanks and 73
--
Daniel
https://F6FLU.org




Joe Subich, W4TV a écrit le 13/07/2021 à 16:16 :

What you want is no longer possible. The upper/lower left/right
triangles have been *replaced* by user selected symbols. See:
Callsign Window -> Settings -> Badges

73,

... Joe, W4TV


On 2021-07-13 9:48 AM, daniel lavocat wrote:
Hi

no one know how to do?

F6FLU
Envoyé de mon iPad

Le 13 juil. 2021 à 10:39, daniel lavocat <F6FLU@gmx.com> a écrit :


Hello
I would like to have the same presentation as in the documentation like this:



i.e. having the small triangles as at the bottom left or right.

I don't see how to display triangles.
In fact I would like to display a triangle at the bottom left if LOTW ; a triangle at the bottom right if eQSL; is it possible ?

Because currently the LOTW and eQSL symbols are only displayed at the top right.

I would like to keep this position at the top right only for stations which are "ON-LINE".
Thank you for your help.

For example here I have :



73


--
Daniel
https://F6FLU.org


locked Re: Callsign window #1 actions and display contradictions

g4wjs
 

On 13/07/2021 22:09, HamApps Support (VK3AMA) wrote:
On 14/07/2021 6:39 am, Jim Cary wrote:
Can the adif export include all QSOs and modes, or just digital ones compatible with WSJT-X?

Jim

You should be able to do all modes. Any modes that WSJT-X is not concerned with in respect to its reporting will be ignored along with adif fields that are not need. BUT, there is increased overhead in parsing the adif file, the more lines it contains the more time it will take WSJT-X to read/reread the file. The increased reading time is likely to be minimal and go unnoticed unless you're file contains hundreds of thousand of entries, in which case I would recommend only exporting a subset of your QSOs.

de Laurie VK3AMA

Hi Jim, and Laurie,

I would recommend that you do not worry about the size of your exported ADIF file, even on a relatively slow PC it will be processed fast and that is done in the background without interrupting normal WSJT-X operation.

Whether you export all QSOs or just digital mode ones from your main station log is your choice, the non-digital mode QSOs can be made use of if the "Settings->Colors->By Mode" option is not checked. In that case prior QSOs in any mode will be considered when determining if something new is to be highlighted. Of course WSJT-X will have no knowledge of new QSOs made outside of WSJT-X, so if you are using a full export then you will need to repeat that process periodically to keep the information on QSOs made outside of WSJT-X up to date.

73
Bill
G4WJS.


--
73
Bill
G4WJS.


locked Re: JTAlert 2.50.3

Laurie, VK3AMA
 



On 13/07/2021 6:39 pm, daniel lavocat wrote:
Hello
I would like to have the same presentation as in the documentation like this:


i.e. having the small triangles as at the bottom left or right.

I don't see how to display triangles.
In fact I would like to display a triangle at the bottom left if LOTW ; a triangle at the bottom right if eQSL; is it possible ?

Because currently the LOTW and eQSL symbols are only displayed at the top right.

I would like to keep this position at the top right only for stations which are "ON-LINE".
Thank you for your help.


73

--
Daniel
https://F6FLU.org

Sorry, That image on the HamApps website is old and will be getting replaced.

The old QSL flags are no longer available. The have been replaced by user-settable symbols, at last count there are 17 different symbols to choose from. The symbols are now grouped together and are always visible, something that was a problem with the old flags in the bottom corners when the display was set to not show the Country. The CQ/73/DX badge would obscure one of the QSL flags.

The change to symbols, grouped in an unobstructed area of the display was done as there is a future need for an additional symbol, bring the count to 4 making it impossible to display all symbols in individual corners of the display without 1 or 2 being obscured by the Badge image.

The only way to get the QSL flags and their positioning back is to downgrade JTAlert to version 2.50.0

de Laurie VK3AMA


locked Re: Callsign window #1 actions and display contradictions

HamApps Support (VK3AMA)
 

On 14/07/2021 6:39 am, Jim Cary wrote:
Can the adif export include all QSOs and modes, or just digital ones compatible with WSJT-X?

Jim

You should be able to do all modes. Any modes that WSJT-X is not concerned with in respect to its reporting will be ignored along with adif fields that are not need. BUT, there is increased overhead in parsing the adif file, the more lines it contains the more time it will take WSJT-X to read/reread the file. The increased reading time is likely to be minimal and go unnoticed unless you're file contains hundreds of thousand of entries, in which case I would recommend only exporting a subset of your QSOs.

de Laurie VK3AMA


locked Re: JTAlert 2.50.3

daniel lavocat
 

Hello
Ok Joe I understood ...
<There is no "blank" background.’s >
I meant white not blank Sorry 😉

Envoyé de mon iPhone

Le 13 juil. 2021 à 21:18, Joe Subich, W4TV <lists@subich.com> a écrit :

On 2021-07-13 11:45 AM, daniel lavocat wrote:

I saw that but it's not the same as this picture on the website
That is an old version (2.50.0, IIRC). There have been many
changes/improvements since then.

And How Can I have the background color as blank ?
There is no "blank" background.

73,

... Joe, W4TV


On 2021-07-13 11:45 AM, daniel lavocat wrote:
No problem Joe
I saw that but it's not the same as this picture on the website
And How Can I have the background color as blank ?
I cannot reproduce exactly as shown in this image taken from JTAlert's website ...
I can not
--
Daniel
https://F6FLU.org
Joe Subich, W4TV a écrit le 13/07/2021 à 17:34 :


Thanks for your answer but on the Badges settings it's only for
Badges ( CQ / 73) not for the LOTW / eQSL
Sorry, "Callsigns" (Settings -> Callsigns)

73,

... Joe, W4TV


On 2021-07-13 10:30 AM, daniel lavocat wrote:
Ji Joe
Thanks for your answer but on the Badges settings it's only for Badges ( CQ /
73) not for the LOTW / eQSL
I don't see how to use the "triangle"
Thanks and 73
--
Daniel
https://F6FLU.org




Joe Subich, W4TV a écrit le 13/07/2021 à 16:16 :

What you want is no longer possible. The upper/lower left/right
triangles have been *replaced* by user selected symbols. See:
Callsign Window -> Settings -> Badges

73,

... Joe, W4TV


On 2021-07-13 9:48 AM, daniel lavocat wrote:
Hi

no one know how to do?

F6FLU
Envoyé de mon iPad

Le 13 juil. 2021 à 10:39, daniel lavocat <F6FLU@gmx.com> a écrit :


Hello
I would like to have the same presentation as in the documentation like this:



i.e. having the small triangles as at the bottom left or right.

I don't see how to display triangles.
In fact I would like to display a triangle at the bottom left if LOTW ; a triangle at the bottom right if eQSL; is it possible ?

Because currently the LOTW and eQSL symbols are only displayed at the top right.

I would like to keep this position at the top right only for stations which are "ON-LINE".
Thank you for your help.

For example here I have :



73


--
Daniel
https://F6FLU.org







locked Re: Callsign window #1 actions and display contradictions

Jim Cary
 

Laurie,

Can the adif export include all QSOs and modes, or just digital ones compatible with WSJT-X?

Jim


locked Re: 2.50.3 FFMA grids

HamApps Support (VK3AMA)
 

On 14/07/2021 5:02 am, W4WT wrote:
Laurie, thanks a lot for the FFMA grids alert addition to 2.50.3.  Eliminating the extraneous grid alerts is a big plus working 6m and just looking for "Fish Grids". 

The update and the FFMA grid alert is working great here!

Joe W4WT

   

de Laurie VK3AMA


locked Re: Callsign window #1 actions and display contradictions

HamApps Support (VK3AMA)
 

On 14/07/2021 6:05 am, Jim Cary wrote:

1. When I double click on a call in the Callsign #1 window the call does not appear in the first or second line of WSJT-X where the call of the station you are wanting to work goes and the Enable TX light does not go to red.

2. Significant differences are occurring between both programs as to whether or not a country or grid, or state are needed.  I believe JT alert takes its information from the alert settings in JT alert.  Is it possible that WSJT takes its information from the WSJT ADIF log?  Since this log got wiped out with the crash and is starting from scratch, that might explain the discrepancies.

Jim
W2SM

  1. WSJT-X not responding to a JTAlert Callsign click event is typically caused by an incomplete setup of WSJT-X. Specifically, the "Accept UDP requests" option is not enabled under the "UDP Server" section of the "Reporting" tab of the WSJT-X Settings.

  2. WSJT-X uses its wsjtx_log.adi file which is now empty. JTAlert uses its internal Alerts database which is populated with data taken from your Logger during the "Rebuild Alert Database" operation. I suggest you do an adif export of your logger and replace the empty wsjtx_log.adi file with that export.

de Laurie VK3AMA


locked Re: Callsign window #1 actions and display contradictions

Joe Subich, W4TV
 

1. When I double click on a call in the Callsign #1
Do you have all three UDP boxes checked in WSJTX -> Settings ->
Reporting?

Is it possible that WSJT takes its information from the WSJT ADIF
log?
That is *exactly* where WSJTX gets its B4 information. Try exporting
all the "WSJT mode" QSOs from your logging program as ADIF then
*replacing* the WSJTX ADIF log with that exported file (and restarting
WSJTX).

73,

... Joe, W4TV


On 2021-07-13 4:05 PM, Jim Cary wrote:
Still trying to recover from a computer crash and the need to rebuilt WSJT-X and JT Alert.  Painful and slow!  At least two issues still remaining.
1. When I double click on a call in the Callsign #1 window the call does not appear in the first or second line of WSJT-X where the call of the station you are wanting to work goes and the Enable TX light does not go to red.
2. Significant differences are occurring between both programs as to whether or not a country or grid, or state are needed.  I believe JT alert takes its information from the alert settings in JT alert.  Is it possible that WSJT takes its information from the WSJT ADIF log?  Since this log got wiped out with the crash and is starting from scratch, that might explain the discrepancies.
Jim
W2SM
Does anyone know the answer to this?


locked Callsign window #1 actions and display contradictions

Jim Cary
 

Still trying to recover from a computer crash and the need to rebuilt WSJT-X and JT Alert.  Painful and slow!  At least two issues still remaining.

1. When I double click on a call in the Callsign #1 window the call does not appear in the first or second line of WSJT-X where the call of the station you are wanting to work goes and the Enable TX light does not go to red.

2. Significant differences are occurring between both programs as to whether or not a country or grid, or state are needed.  I believe JT alert takes its information from the alert settings in JT alert.  Is it possible that WSJT takes its information from the WSJT ADIF log?  Since this log got wiped out with the crash and is starting from scratch, that might explain the discrepancies.

Jim
W2SM


 

Does anyone know the answer to this?


locked Re: New JTalert 2.50.3 missing callsign window

Dan K2IE
 

Same here...20.50.3 64 bit installed today and I no longer have the callsign window.


locked Re: JTAlert 2.50.3

Joe Subich, W4TV
 

On 2021-07-13 11:45 AM, daniel lavocat wrote:

I saw that but it's not the same as this picture on the website
That is an old version (2.50.0, IIRC). There have been many
changes/improvements since then.

And How Can I have the background color as blank ?
There is no "blank" background.

73,

... Joe, W4TV


On 2021-07-13 11:45 AM, daniel lavocat wrote:
No problem Joe
I saw that but it's not the same as this picture on the website
And How Can I have the background color as blank ?
I cannot reproduce exactly as shown in this image taken from JTAlert's website ...
I can not
--
Daniel
https://F6FLU.org
Joe Subich, W4TV a écrit le 13/07/2021 à 17:34 :


Thanks for your answer but on the Badges settings it's only for
Badges ( CQ / 73) not for the LOTW / eQSL
Sorry, "Callsigns" (Settings -> Callsigns)

73,

... Joe, W4TV


On 2021-07-13 10:30 AM, daniel lavocat wrote:
Ji Joe
Thanks for your answer but on the Badges settings it's only for Badges ( CQ /
73) not for the LOTW / eQSL
I don't see how to use the "triangle"
Thanks and 73
--
Daniel
https://F6FLU.org




Joe Subich, W4TV a écrit le 13/07/2021 à 16:16 :

What you want is no longer possible. The upper/lower left/right
triangles have been *replaced* by user selected symbols. See:
Callsign Window -> Settings -> Badges

73,

... Joe, W4TV


On 2021-07-13 9:48 AM, daniel lavocat wrote:
Hi

no one know how to do?

F6FLU
Envoyé de mon iPad

Le 13 juil. 2021 à 10:39, daniel lavocat <F6FLU@gmx.com> a écrit :


Hello
I would like to have the same presentation as in the documentation like this:



i.e. having the small triangles as at the bottom left or right.

I don't see how to display triangles.
In fact I would like to display a triangle at the bottom left if LOTW ; a triangle at the bottom right if eQSL; is it possible ?

Because currently the LOTW and eQSL symbols are only displayed at the top right.

I would like to keep this position at the top right only for stations which are "ON-LINE".
Thank you for your help.

For example here I have :



73


--
Daniel
https://F6FLU.org


locked 2.50.3 FFMA grids

W4WT
 

Laurie, thanks a lot for the FFMA grids alert addition to 2.50.3.  Eliminating the extraneous grid alerts is a big plus working 6m and just looking for "Fish Grids". 

The update and the FFMA grid alert is working great here!

Joe W4WT


locked Re: New JTalert 2.50.3 missing callsign window

Gary Gorniak
 

I am probably going to post something obvious here, but what the heck.  It's a mistake that I have made.  Did you make sure that under "View" in the settings, you have "Show Log Fields" checked?

73 de Gary - W9BS

On 7/13/2021 1:30 PM, Greg, KM5GT wrote:
To complete the picture, this is what I am seeing.  The "stars" below the program header is my background.



73, Greg, KM5GT


locked Re: 2.50.3 problems

Chris Morrison
 

Hello All, 
I'm having the same problem with the callsign window not displaying and no sound with 2.50.3. 
Looking at task manager JTalertV2.Manager is running but its being reported as 32-bit despite installing the X64 version of JTalert.



How to I do a clean install of JTalert?

I uninstalled all the HamApps using the normal windows uninstaller in the control panel (JTAlert, Database, and sounds). I deleted the HamApps folders in Program Files (x86), this was where the sounds were installed. I deleted the HamApps from my radio folder (C:\Radio\HamApps). I renamed the HamsApps folder in the AppData\Local\HamApps directory to HamApps(OLD). But when I go try install JTalert again the installer knows my directory C:\Radio\HamApps\ as a location to install instead of the in default in Program Files. So the installed is seeing something from an old installation and might be why its installing the 32bit files instead of the 64 bit version?

73
Chris
MM1PTT


locked Re: New JTalert 2.50.3 missing callsign window

 

To complete the picture, this is what I am seeing.  The "stars" below the program header is my background.



73, Greg, KM5GT

2541 - 2560 of 38526