Date   

locked Re: Sound When Someone is Transmitting to Me

Brad Garber
 

Thanks Laurie.


locked Re: Activity and Callsigns Windows Problem JTAlertV2

bob.k6rwm
 

Thanks, Laurie.
73.


locked Re: Sound When Someone is Transmitting to Me

Brad Garber
 

Thanks Joe.  That worked.

73


locked Re: Filters - A feature request

HamApps Support (VK3AMA)
 

On 1/06/2021 7:00 am, Mike Flowers wrote:

I am turning off and on NA decodes very frequently, and B4 off and on less frequently.  

And I agree that from a structural perspective having Filters centralized is best.   

It's not really an inconvenience to do the Settings > Filters process - I just thought it would be 'neat' to be able to do it from the Callsigns window.

73 de Mike, K6MKF

Regarding the NA only filtering, I can offer (with the next release) a "Local Decodes" display. This will restrict the callsigns displayed to those originating from your Country (DXCC #), not quite a NA Filter, but close. The opposite of the "Local Decodes" display is the "DX Decodes" which will restrict the callsigns displayed to those originating from Countries other than your own. To "sweeten the pot", the Callsigns window will allow you to view both these filtered views concurrently in separate display panels on the Callsigns window. ;-)

de Laurie VK3AMA


locked Re: Filters - A feature request

HamApps Support (VK3AMA)
 

On 1/06/2021 6:25 am, Joe Subich, W4TV wrote:
For me ... "Show only callsigns generating alerts"!  I turn that on
when a band is busy (e.g., 20 meters) and off when a band has a
relatively low number of stations (e.g., 6 meters, 10 meters, 12
meters most of the time).

73,

   ... Joe, W4TV

Joe,

Since your using the Beta, you could switch the view type of the panel that you wanted to be filtered to "Alerts Only".
I can see the need to provide quick access to making these on-the-fly changes, perhaps via the individual Panel menus.

de Laurie VK3AMA


locked Re: Filters - A feature request

Mike Flowers
 

Hi Laurie,

I am turning off and on NA decodes very frequently, and B4 off and on less frequently.  

And I agree that from a structural perspective having Filters centralized is best.   

It's not really an inconvenience to do the Settings > Filters process - I just thought it would be 'neat' to be able to do it from the Callsigns window.

73 de Mike, K6MKF


locked Re: Filters - A feature request

Joe Subich, W4TV
 

On 2021-05-31 4:06 PM, HamApps Support (VK3AMA) wrote:

Which of the Filter settings are you frequently changing?
For me ... "Show only callsigns generating alerts"! I turn that on
when a band is busy (e.g., 20 meters) and off when a band has a
relatively low number of stations (e.g., 6 meters, 10 meters, 12
meters most of the time).

73,

... Joe, W4TV


On 2021-05-31 4:06 PM, HamApps Support (VK3AMA) wrote:
On 1/06/2021 3:14 am, Mike Flowers wrote:
I am using JTAlert v2.50.1 with great effect here.  I find that I am using the Settings > Filters features quite a lot.

I change the Filter values frequently as I change bands and as propagation changes.

It would be most convenient of 'Filters' were one of the Windows Options for the Callsign window.  I know this would improve usability for me, and I suspect for other ops as well.
Mike,
I agree the Filtering needs to be moved to the Callsigns window, but there are complications.
Currently, the decodes feed that the Callsigns window receives from the main JTAlert process (the old main window) is already filtered. To move the Filtering to the Callsigns window would require that the decode feed from the main window be unfiltered, that makes sense, but some filtering is occurring in the Alerts generated code which is still within the bowels of the old code. There are some filtering options I could easily move right now, but I chose not to do that to avoid likely user confusion by having filter options in two different parts of the program.
Which of the Filter settings are you frequently changing?
de Laurie VK3AMA


locked Re: Filters - A feature request

HamApps Support (VK3AMA)
 

On 1/06/2021 3:14 am, Mike Flowers wrote:
I am using JTAlert v2.50.1 with great effect here.  I find that I am using the Settings > Filters features quite a lot.

I change the Filter values frequently as I change bands and as propagation changes.

It would be most convenient of 'Filters' were one of the Windows Options for the Callsign window.  I know this would improve usability for me, and I suspect for other ops as well.

Mike,

I agree the Filtering needs to be moved to the Callsigns window, but there are complications.

Currently, the decodes feed that the Callsigns window receives from the main JTAlert process (the old main window) is already filtered. To move the Filtering to the Callsigns window would require that the decode feed from the main window be unfiltered, that makes sense, but some filtering is occurring in the Alerts generated code which is still within the bowels of the old code. There are some filtering options I could easily move right now, but I chose not to do that to avoid likely user confusion by having filter options in two different parts of the program.

Which of the Filter settings are you frequently changing?

de Laurie VK3AMA


locked Re: Sound When Someone is Transmitting to Me

Joe Subich, W4TV
 

Alerts -> Own Call


73,

... Joe, W4TV

On 2021-05-31 3:23 PM, Brad Garber wrote:
I used to get a double bell sound when someone transmitted to me.  In 2.50.1 that is no longer happening.  What alert is associated with this action?
Thanks


locked Re: Sound When Someone is Transmitting to Me

HamApps Support (VK3AMA)
 

On 1/06/2021 5:23 am, Brad Garber wrote:
used to get a double bell sound when someone transmitted to me.  In 2.50.1 that is no longer happening.  What alert is associated with this action?

Thanks

The Own Call alert will play a sound when someone calls you. The default sound for that Alert is a rapid "ding ding".
There is an Alert with a default sound of "beep beep", that is the end of TX/RX period Alert. Perhaps your confusing the two or had previously changed the sounds used. Regardless, none of those Alerts have changed with 2.50.1, they are still available.

de Laurie VK3AMA


locked Re: a new JTAlert installation does not start

HamApps Support (VK3AMA)
 

On 1/06/2021 3:00 am, DL7PJ Peter wrote:
The main problem was that I didn't start the program as admin.
I found out about multicast. Now everything works 100%.
Thank you for the help and advice with multicast.

 

73 de DL7PJ Peter 


NO! There is no need to run JTAlert with elevated privileges!  If you have to do that it will be because you have other programs that JTAlert is interacting with set to run elevated. There should never be any normal need to do this. Running multiple applications elevated severely compromises the security of your PC. I do not recommend that. If your turn off the "Run as administrator" settings of your other applications, there will not be a need to run JTAlert elevated.

de Laurie VK3AMA


locked Sound When Someone is Transmitting to Me

Brad Garber
 

I used to get a double bell sound when someone transmitted to me.  In 2.50.1 that is no longer happening.  What alert is associated with this action?

Thanks


locked Re: Error JtAlert 2.50.1 Windows 64 bit

HamApps Support (VK3AMA)
 

On 31/05/2021 11:43 pm, 5H1FF Frans wrote:
I am running Windows JtAlert 2.50.1 64bit and after 2 days working fine it suddenly came into an error state today and exited.
Now if I start up get "Error starting JTAlertV2.Manager.exe" and after pressing OK get "Autolt Error", "Line 41593 (File 'c:\WSJTX\JTAlert.exe')" - "Error: Variable used without being declared."
5H1FF Frans, Tanzania
Frans,

Please post an image of the actual error window, it contains additional information that will help identify the cause of the error.

You can ignore the AutoIT error, that is due to the Manager error and JTAlert closing down before it had finished its startup initialization.

Since JTAlert was working correctly previously, your installation may now be compromised with missing files. A reinstall of JTAlert should fix that. However, if there are missing files, that could indicate that your PC Protection software has decided to suddenly dislike JTAlert and has either removed files or is preventing JTAlert from starting its Manager program.

de Laurie VK3AMA


locked Re: FFMA Grids

HamApps Support (VK3AMA)
 

On 1/06/2021 12:37 am, Jeff Otterson wrote:
This might be easier for Laurie to deal with:

Tnx Jeff, but you're too late. I have already created the list. Unless something unexpected arises from the JTAlert Test team, FFMA Grids will be available in the upcoming release as an optional dedicated view within the new Callsigns window.

de Laurie VK3AMA


locked Error JtAlert 2.50.1 Windows 64 bit

5H1FF Frans
 

I am running Windows JtAlert 2.50.1 64bit and after 2 days working fine it suddenly came into an error state today and exited.
Now if I start up get "Error starting JTAlertV2.Manager.exe" and after pressing OK get "Autolt Error", "Line 41593 (File 'c:\WSJTX\JTAlert.exe')" - "Error: Variable used without being declared."
5H1FF Frans, Tanzania


locked Filters - A feature request

Mike Flowers
 

I am using JTAlert v2.50.1 with great effect here.  I find that I am using the Settings > Filters features quite a lot.

I change the Filter values frequently as I change bands and as propagation changes.

It would be most convenient of 'Filters' were one of the Windows Options for the Callsign window.  I know this would improve usability for me, and I suspect for other ops as well.

Thanks for this great tool, Laurie!


locked Re: a new JTAlert installation does not start

DL7PJ Peter
 

I've read a lot now and reconfigured.
The main problem was that I didn't start the program as admin.
I found out about multicast. Now everything works 100%.
Thank you for the help and advice with multicast.

 

73 de DL7PJ Peter 

 

that was the old mistake screenshot :

 

 

my current configuration :

 

 

 

 


locked Re: FFMA Grids

Jeff Otterson
 

This might be easier for Laurie to deal with:

 

const ffma_grids = [
  'CM79', 'CM86', 'CM87', 'CM88', 'CM89', 'CM93', 'CM94', 'CM95', 'CM96', 'CM97', 'CM98', 'CM99',
  'CN70', 'CN71', 'CN72', 'CN73', 'CN74', 'CN75', 'CN76', 'CN77', 'CN78', 'CN80', 'CN81', 'CN82',
  'CN83', 'CN84', 'CN85', 'CN86', 'CN87', 'CN88', 'CN90', 'CN91', 'CN92', 'CN93', 'CN94', 'CN95',
  'CN96', 'CN97', 'CN98', 'DL79', 'DL88', 'DL89', 'DL98', 'DL99', 'DM02', 'DM03', 'DM04', 'DM05',
  'DM06', 'DM07', 'DM08', 'DM09', 'DM12', 'DM13', 'DM14', 'DM15', 'DM16', 'DM17', 'DM18', 'DM19',
  'DM22', 'DM23', 'DM24', 'DM25', 'DM26', 'DM27', 'DM28', 'DM29', 'DM31', 'DM32', 'DM33', 'DM34',
  'DM35', 'DM36', 'DM37', 'DM38', 'DM39', 'DM41', 'DM42', 'DM43', 'DM44', 'DM45', 'DM46', 'DM47',
  'DM48', 'DM49', 'DM51', 'DM52', 'DM53', 'DM54', 'DM55', 'DM56', 'DM57', 'DM58', 'DM59', 'DM61',
  'DM62', 'DM63', 'DM64', 'DM65', 'DM66', 'DM67', 'DM68', 'DM69', 'DM70', 'DM71', 'DM72', 'DM73',
  'DM74', 'DM75', 'DM76', 'DM77', 'DM78', 'DM79', 'DM80', 'DM81', 'DM82', 'DM83', 'DM84', 'DM85',
  'DM86', 'DM87', 'DM88', 'DM89', 'DM90', 'DM91', 'DM92', 'DM93', 'DM94', 'DM95', 'DM96', 'DM97',
  'DM98', 'DM99', 'DN00', 'DN01', 'DN02', 'DN03', 'DN04', 'DN05', 'DN06', 'DN07', 'DN08', 'DN10',
  'DN11', 'DN12', 'DN13', 'DN14', 'DN15', 'DN16', 'DN17', 'DN18', 'DN20', 'DN21', 'DN22', 'DN23',
  'DN24', 'DN25', 'DN26', 'DN27', 'DN28', 'DN30', 'DN31', 'DN32', 'DN33', 'DN34', 'DN35', 'DN36',
  'DN37', 'DN38', 'DN40', 'DN41', 'DN42', 'DN43', 'DN44', 'DN45', 'DN46', 'DN47', 'DN48', 'DN50',
  'DN51', 'DN52', 'DN53', 'DN54', 'DN55', 'DN56', 'DN57', 'DN58', 'DN60', 'DN61', 'DN62', 'DN63',
  'DN64', 'DN65', 'DN66', 'DN67', 'DN68', 'DN70', 'DN71', 'DN72', 'DN73', 'DN74', 'DN75', 'DN76',
  'DN77', 'DN78', 'DN80', 'DN81', 'DN82', 'DN83', 'DN84', 'DN85', 'DN86', 'DN87', 'DN88', 'DN90',
  'DN91', 'DN92', 'DN93', 'DN94', 'DN95', 'DN96', 'DN97', 'DN98', 'EL06', 'EL07', 'EL08', 'EL09',
  'EL15', 'EL16', 'EL17', 'EL18', 'EL19', 'EL28', 'EL29', 'EL39', 'EL49', 'EL58', 'EL59', 'EL79',
  'EL84', 'EL86', 'EL87', 'EL88', 'EL89', 'EL94', 'EL95', 'EL96', 'EL97', 'EL98', 'EL99', 'EM00',
  'EM01', 'EM02', 'EM03', 'EM04', 'EM05', 'EM06', 'EM07', 'EM08', 'EM09', 'EM10', 'EM11', 'EM12',
  'EM13', 'EM14', 'EM15', 'EM16', 'EM17', 'EM18', 'EM19', 'EM20', 'EM21', 'EM22', 'EM23', 'EM24',
  'EM25', 'EM26', 'EM27', 'EM28', 'EM29', 'EM30', 'EM31', 'EM32', 'EM33', 'EM34', 'EM35', 'EM36',
  'EM37', 'EM38', 'EM39', 'EM40', 'EM41', 'EM42', 'EM43', 'EM44', 'EM45', 'EM46', 'EM47', 'EM48',
  'EM49', 'EM50', 'EM51', 'EM52', 'EM53', 'EM54', 'EM55', 'EM56', 'EM57', 'EM58', 'EM59', 'EM60',
  'EM61', 'EM62', 'EM63', 'EM64', 'EM65', 'EM66', 'EM67', 'EM68', 'EM69', 'EM70', 'EM71', 'EM72',
  'EM73', 'EM74', 'EM75', 'EM76', 'EM77', 'EM78', 'EM79', 'EM80', 'EM81', 'EM82', 'EM83', 'EM84',
  'EM85', 'EM86', 'EM87', 'EM88', 'EM89', 'EM90', 'EM91', 'EM92', 'EM93', 'EM94', 'EM95', 'EM96',
  'EM97', 'EM98', 'EM99', 'EN00', 'EN01', 'EN02', 'EN03', 'EN04', 'EN05', 'EN06', 'EN07', 'EN08',
  'EN10', 'EN11', 'EN12', 'EN13', 'EN14', 'EN15', 'EN16', 'EN17', 'EN18', 'EN20', 'EN21', 'EN22',
  'EN23', 'EN24', 'EN25', 'EN26', 'EN27', 'EN28', 'EN29', 'EN30', 'EN31', 'EN32', 'EN33', 'EN34',
  'EN35', 'EN36', 'EN37', 'EN38', 'EN40', 'EN41', 'EN42', 'EN43', 'EN44', 'EN45', 'EN46', 'EN47',
  'EN48', 'EN50', 'EN51', 'EN52', 'EN53', 'EN54', 'EN55', 'EN56', 'EN57', 'EN58', 'EN60', 'EN61',
  'EN62', 'EN63', 'EN64', 'EN65', 'EN66', 'EN67', 'EN70', 'EN71', 'EN72', 'EN73', 'EN74', 'EN75',
  'EN76', 'EN80', 'EN81', 'EN82', 'EN83', 'EN84', 'EN85', 'EN86', 'EN90', 'EN91', 'EN92', 'FM02',
  'FM03', 'FM04', 'FM05', 'FM06', 'FM07', 'FM08', 'FM09', 'FM13', 'FM14', 'FM15', 'FM16', 'FM17',
  'FM18', 'FM19', 'FM25', 'FM26', 'FM27', 'FM28', 'FM29', 'FN00', 'FN01', 'FN02', 'FN03', 'FN10',
  'FN11', 'FN12', 'FN13', 'FN14', 'FN20', 'FN21', 'FN22', 'FN23', 'FN24', 'FN25', 'FN30', 'FN31',
  'FN32', 'FN33', 'FN34', 'FN35', 'FN41', 'FN42', 'FN43', 'FN44', 'FN45', 'FN46', 'FN51', 'FN53',
  'FN54', 'FN55', 'FN56', 'FN57', 'FN64', 'FN65', 'FN66', 'FN67'];

origin is https://github.com/n1kdo/lotw-gridmapper/blob/master/GridMapper.html

Jeff n1kdo


 


locked Re: Activity and Callsigns Windows Problem JTAlertV2

Laurie, VK3AMA
 

On 31/05/2021 6:19 pm, bob.k6rwm wrote:
For some reason both of these windows appear in a 2 inch square and do not display properly. The settings icon is not present and no columns exist. The windows do not move, except to be minimized or closed,
and are not re-sizeable. I am using JTAlert 2.50.1, but the problem existed in the previous version as well.
73.
de Bob - K6RWM
If the Gear icon is not accessible then use the F2 hotkey to bring up the Options popup. The F2 key is the standard across all the JTAlert windows to open their Settings/Options.

de Laurie VK3AMA


locked Activity and Callsigns Windows Problem JTAlertV2

bob.k6rwm
 

For some reason both of these windows appear in a 2 inch square and do not display properly. The settings icon is not present and no columns exist. The windows do not move, except to be minimized or closed,
and are not re-sizeable. I am using JTAlert 2.50.1, but the problem existed in the previous version as well.
73.
de Bob - K6RWM

2581 - 2600 of 37662