Date   

locked Re: Fred Fish Award

Hasan Schiers N0AN
 

It is in DXLabs Suite Logger: DXKeeper
73, N0AN
Hasan


On Sun, May 30, 2021 at 6:07 AM Dave Garber <ve3wej@...> wrote:
perhaps this award could be added to logging programs, as well.  I did not see it in Log4om


Dave Garber
VE3WEJ / VE3IE


On Sun, May 30, 2021 at 6:49 AM Robie - AJ4F <ruler55@...> wrote:
Laurie,

Here's a link to the FFMA (Fred Fish Memorial Award)


Work and confirm all 488 grid squares that cover the contiguous 48 US states.

Robie - AJ4F

On Sun, May 30, 2021 at 3:42 AM HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:
On 30/05/2021 10:13 am, Dave NT9E wrote:
Laurie would it be possible to see some support for just the 488 Grids needed for the Fred Fish award instead of having to deal with every grid on earth?

What's the Fred Fish Award? Do you have a link to the Award requirements?

de Laurie VK3AMA


locked Re: Fred Fish Award

Dave Garber
 

perhaps this award could be added to logging programs, as well.  I did not see it in Log4om


Dave Garber
VE3WEJ / VE3IE


On Sun, May 30, 2021 at 6:49 AM Robie - AJ4F <ruler55@...> wrote:
Laurie,

Here's a link to the FFMA (Fred Fish Memorial Award)


Work and confirm all 488 grid squares that cover the contiguous 48 US states.

Robie - AJ4F

On Sun, May 30, 2021 at 3:42 AM HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:
On 30/05/2021 10:13 am, Dave NT9E wrote:
Laurie would it be possible to see some support for just the 488 Grids needed for the Fred Fish award instead of having to deal with every grid on earth?

What's the Fred Fish Award? Do you have a link to the Award requirements?

de Laurie VK3AMA


locked Re: Fred Fish Award

Robie - AJ4F
 

Laurie,

Here's a link to the FFMA (Fred Fish Memorial Award)


Work and confirm all 488 grid squares that cover the contiguous 48 US states.

Robie - AJ4F

On Sun, May 30, 2021 at 3:42 AM HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:
On 30/05/2021 10:13 am, Dave NT9E wrote:
Laurie would it be possible to see some support for just the 488 Grids needed for the Fred Fish award instead of having to deal with every grid on earth?

What's the Fred Fish Award? Do you have a link to the Award requirements?

de Laurie VK3AMA


locked Re: UDP Error

HamApps Support (VK3AMA)
 

On 30/05/2021 12:10 pm, KE7AZ wrote:
2.50.1 does not run.  It crashes right after the "loading data" window closes.

The email that I tried to send was for 2.16.17.  It runs with the UDP error.  However when I used the support link I got this email.

"Sorry, JTAlert support is currently only available by posting a message to the support forum at https://hamapps.groups.io/

 

This is an automated message, do not reply."

Logan


OK.

I went onto the server and was able to recover your support request files before the daily file cleanup removed them.

I note several issues.
  1. You have WSJT-X set to run with elevated privileges (Run as administrator). There is never any need to do this and is likely one of the causes of the UDP error.

  2. You have the UDP Server port set in WSJT-X to 7825. This is an unusual number, It looks like one of the HRD port numbers. Are you running HRD? If not, that port may be getting used by some other app on your PC. I suggest changing it back to the default 2237.

  3. I note that none (zero) of the several files that get created by the JTAlertV2.Manager.exe process are present, indicating that this process was never run. It is automatically launched by JTAlert. It would appear that what ever is the cause of the JTAlert shutdown is occurring before it has been able to launch the Manager process.

  4. Since JTAlert is closing without presenting an error window it is unlikely an internal code error is the cause of the JTAlert shutdown. Most likely your PC protection software is interfering, especially if there is a privileges mismatch between JTAlert and WSJT-X. What protection software do you use?

  5.  I note JTAlert is installed under D:\Program Files (x86)\. That is not normally a problem as JTAlert is coded to work under the Windows protected "Program Files..." directory trees, but given the privileges problems, perhaps your Protection software is also disliking this install location. Try installing JTAlert in a dedicated directory out side of the protected directories.

de Laurie VK3AMA


locked Re: Fred Fish Award

HamApps Support (VK3AMA)
 

On 30/05/2021 10:13 am, Dave NT9E wrote:
Laurie would it be possible to see some support for just the 488 Grids needed for the Fred Fish award instead of having to deal with every grid on earth?

What's the Fred Fish Award? Do you have a link to the Award requirements?

de Laurie VK3AMA


locked Re: UDP Error

KE7AZ
 

2.50.1 does not run.  It crashes right after the "loading data" window closes.

The email that I tried to send was for 2.16.17.  It runs with the UDP error.  However when I used the support link I got this email.

"Sorry, JTAlert support is currently only available by posting a message to the support forum at https://hamapps.groups.io/

 

This is an automated message, do not reply."

Logan

 


locked Re: UDP Error

HamApps Support (VK3AMA)
 

On 30/05/2021 4:48 am, KE7AZ wrote:
Email sent.  Thank you for looking into this.  It has been a challenge, one day it works, next day it doesn't.
73
Logan

Nothing received.

Make sure you using the Contact Support link from JTAlert 2.50.1, and leave JTAlert running for at least 3 minutes before sending the request.

de Laurie VK3AMA


locked Fred Fish Award

Dave NT9E
 

Laurie would it be possible to see some support for just the 488 Grids needed for the Fred Fish award instead of having to deal with every grid on earth?


locked Re: Alerts window does'nt start.

HamApps Support (VK3AMA)
 

On 30/05/2021 2:05 am, jeff29754 M1BCM wrote:
Hi Laurie, problem solved. It was Windows 10 UAC that was stopping manager from starting. Only thing I need to solve now is regaining the ability to SINGLE-CLICK on a callsign to initiate a call.

Many thanks to you Laurie, and all input by others.

If WSJT-X is not responding to Callsign click events, the usual cause is not having the WSJT-X UDP Server settings correct. Specifically, if the "Accept UDP requests" is not enabled WSJT-X will not respond to JTAlert callsign clicks.

   

de Laurie VK3AMA


locked Re: Adjusting window size

HamApps Support (VK3AMA)
 

On 29/05/2021 11:39 pm, Bill M wrote:
I can adjust the callsign window but not the main window. I have tried unchecking the boes but it will not move. It is wider than the WSJT-X screen and blocks the waterfall on my screen.
Bill

NO.

The width of the main JTAlert window is constrained by the width of the display area of the Log Fields and the Confirmed Bands/Modes.
   

Eventually, when those two displays are moved over to the new .NET 5 code-base (introduced with JTAlert 2.50.0), the main window becomes irrelevant, at which time it will be replaced with either a small floating toolbar or an icon in the Windows notification area (or both), I haven't decided how that will play-out.

de Laurie VK3AMA


locked Re: UDP Error

KE7AZ
 

Email sent.  Thank you for looking into this.  It has been a challenge, one day it works, next day it doesn't.
73
Logan


locked Re: Alerts window does'nt start.

jeff29754 M1BCM
 

Hi Laurie, problem solved. It was Windows 10 UAC that was stopping manager from starting. Only thing I need to solve now is regaining the ability to SINGLE-CLICK on a callsign to initiate a call.

Many thanks to you Laurie, and all input by others.


locked Re: Adjusting window size

Joe Subich, W4TV
 

The old main window is fixed size. It has always been that wide and
will not change until Laurie has completed the migration to version 3.

73,

... Joe, W4TV

On 2021-05-29 9:39 AM, Bill M wrote:
I can adjust the callsign window but not the main window. I have tried unchecking the boes but it will not move. It is wider than the WSJT-X screen and blocks the waterfall on my screen.
Bill


locked Re: JT Alert Problem

John K9EL
 

Ron - thank you!    Yes, I had that box checked to Enable the DX Marathon re-build, but I did not check the "No QSL Confirmation Box" below that!   Of course the Marathon does not require confirmations, so that did it!!!   
Thank you for directing me to the place that solved the problem.
Best 73 John K9EL


locked Adjusting window size

Bill M
 

I can adjust the callsign window but not the main window. I have tried unchecking the boes but it will not move. It is wider than the WSJT-X screen and blocks the waterfall on my screen.
Bill


locked Re: JT Alert Problem

David Tucker
 

OK Ron I will try that.

Thanks Dave NU4N

On 5/29/2021 7:34 AM, Ron W3RJW via groups.io wrote:
May be obvious, but could you have missed adding CQ Marathon to the list of scanned categories for the rebuild ?


--
73
Ron, W3RJW

FTdx-5000, Timewave Navigator, WSJT-x 2.4.0, JTAlert 2.50.1 beta, HRD Deluxe v6.7.0.357
FTdx-3000, SignaLink USB


locked Re: JT Alert Problem

Ron W3RJW
 

May be obvious, but could you have missed adding CQ Marathon to the list of scanned categories for the rebuild ?


--
73
Ron, W3RJW

FTdx-5000, Timewave Navigator, WSJT-x 2.4.0, JTAlert 2.50.1 beta, HRD Deluxe v6.7.0.357
FTdx-3000, SignaLink USB


locked Re: UDP Error

Michael Black
 

One thing that apparently happened was Dave had the 32-bit .Net installation and the 64-bit JTAlert which said that the 32-bit .Net was OK.

Laurie -- you might want to check that the correct 32/64 is being checked.

Also had some bad entries in Log4OM that was swallowing the UDP data.

Mike W9MDB




On Friday, May 28, 2021, 07:29:25 PM CDT, David Marcelli via groups.io <dgmarcelli@...> wrote:


Hi Laurie,

Thanks for getting back to me so quickly.  I made all of the changes you suggested and still had a few issues.  Much to my surprise, I got an email from Mike, W9MDB.  Mike took the time to give me a call and tweak a few things that got me up and running again.  

That unsolicited gesture of kindness is what amateur radio is all about.  I also admire your passion for the hobby and your dedication to keeping it going strong.  Thanks again. 

73,

Dave
N4CQ


-----Original Message-----
From: HamApps Support (VK3AMA) <vk3ama.ham.apps@...>
To: Support@HamApps.groups.io
Sent: Fri, May 28, 2021 6:21 pm
Subject: Re: [HamApps] UDP Error

On 29/05/2021 8:06 am, KE7AZ wrote:
A previous version looked good for a while but didn't stand the test of time. Now, no version of JTAlert will run on my system.  Yet a month ago, everything was fine.  I added no new apps, just Win 10 updates. I've tried everything I could find including system checks with DSIM and SCANNOW.  Only thing left to do is a clean reinstall of Win 10 but I won't be doing that any time soon, too many applications to reload. What a mess!

Ignoring the UDP error message, leave JTAlert running for at least 3 minutes then use the "Help" -> "Contact Support" menu, on the main JTAlert window, to send me your JTAlert files for analysis.

de Laurie VK3AMA



locked Re: UDP Error

David Marcelli
 

Hi Laurie,

Thanks for getting back to me so quickly.  I made all of the changes you suggested and still had a few issues.  Much to my surprise, I got an email from Mike, W9MDB.  Mike took the time to give me a call and tweak a few things that got me up and running again.  

That unsolicited gesture of kindness is what amateur radio is all about.  I also admire your passion for the hobby and your dedication to keeping it going strong.  Thanks again. 

73,

Dave
N4CQ


-----Original Message-----
From: HamApps Support (VK3AMA) <vk3ama.ham.apps@...>
To: Support@HamApps.groups.io
Sent: Fri, May 28, 2021 6:21 pm
Subject: Re: [HamApps] UDP Error

On 29/05/2021 8:06 am, KE7AZ wrote:
A previous version looked good for a while but didn't stand the test of time. Now, no version of JTAlert will run on my system.  Yet a month ago, everything was fine.  I added no new apps, just Win 10 updates. I've tried everything I could find including system checks with DSIM and SCANNOW.  Only thing left to do is a clean reinstall of Win 10 but I won't be doing that any time soon, too many applications to reload. What a mess!

Ignoring the UDP error message, leave JTAlert running for at least 3 minutes then use the "Help" -> "Contact Support" menu, on the main JTAlert window, to send me your JTAlert files for analysis.

de Laurie VK3AMA



locked JT Alert Problem

John K9EL
 

I am sure this is an operator error problem, but I cannot figure it out.

 

I was using version V2.50.00 and all was working just fine.   I bought a new computer for ham use so installed the same version on the new PC.   I ran both PC’s side by side and went through each setting to make sure it was identical to the old setup.

 

I then enabling logging and entered the location of my master log file.    I then closed JT Alert and re-started.   It read in the complete log file.   I then went to Rebuild Alert Database and it went through the log completely.   Unfortunately it does not appear to reading the files correctly as none of my already worked zones or countries for the marathon show up.  Only one country and one zone are shown as worked.   I can go back to the old computer and rebuild the database using the exact same file and it works fine.

 

I tried un-installing JT Alert, even going through the Windows registry and deleting any and all references to HamApps and JT Alert, but when I re-install and go through the settings, I still show only the same one zone and one country already worked for the DX Marathon.   I compared the settings between the two computers and the boxes all checked are identical.

 

If anyone has a clue on what I am doing wrong, I would sure appreciate hearing from you.  I really miss having JT Alert, but is useless as it is.

 

73, John K9EL

 

3501 - 3520 of 38533