Date   

locked Re: 2.5.0 -- AutoIt Error

HamApps Support (VK3AMA)
 

On 4/05/2021 5:16 pm, Richard, PD3RFR wrote:
Some steps, not in chronical order and maybe missing some steps:
Installed JTAlert 2.5.0.1., de-installed it, installed older version of JT (same error other line), reinstalled latest version. Deleted config, put config back, upgraded HRD in meanwhile, rebooted the PC several times.
Took a while. I'm happy now, sorry I can't reproduce.. or have the right solution. I think it had to do with the config.

Richard, tnx for the update.

I also suspect it is a config issue, but that should have been evident when starting JTAlert without a config, unless you deleted the wrong file. There are likely 2 config.sqlite files in your %localappdata%\HamApps\ directory tree. One under a JTAlertX directory and one under a JTAlert directory. The one under JTAlert is old and no longer used. The correct file is under the JTAlertX directory.

FWIW, the whole directory structure and files locations will be changing as JTAlert incorporates the features of the JTAlertV3 (unreleased) code-base. Eventually the location of the user setting files will be user-settable and no longer tied to the %localappdata% area.

de Laurie VK3AMA


locked Re: JTAlert problem with Scan and Rebuild database

HamApps Support (VK3AMA)
 

On 5/05/2021 1:47 am, Dennis wrote:
can't get JAlert to Scan and rebuild database

In the JTAlert Settings, "Logging -> DXLab DXKeeper" section, is the correct log file displayed?

Also, I strongly suggest you update your JTAlert version, 2.16.4 is over 12 months old.

de Laurie VK3AMA


locked Re: CHat support without WSJTx

HamApps Support (VK3AMA)
 

On 5/05/2021 1:52 am, Franco wrote:
There is absolutely no possibility to use the JTalert CHAT (F5) without always having to start WSJTx first and then quit, why don't I use that??

Thanks for info
Franco

Messaging (Chat) is built into JTAlert, it cannot be run without JTAlert running. JTAlert needs to find a copy of WSJT-X running before it can finish its startup. Thus it is not possible to bring up the JTAlert Messaging without WSJT-X running.

de Laurie VK3AMA


locked Re: Callsign window doesn't minimize

HamApps Support (VK3AMA)
 

On 4/05/2021 11:54 am, WU9D wrote:

Try unticking “Show in Taskbar”. The window then doesn’t minimize. Tick the box and its behavior is like the others. Strange.


That is standard Windows behavior when minimizing a window and the show in taskbar setting is turned off. Since Windows cannot minimize to the taskbar, it minimizes it to an entry to just above the taskbar on the left. Here is mine when the Messaging, Callsigns and Activity windows are all minimized when the show in taskbar setting is off.

   

Windows does this so you still have access to a minimized window that is not visible in the TaskBar.
There is nothing that I can do about this standard Windows behavior.

de Laurie VK3AMA
 


locked Re: v2.50.1 Second or third FT8 contact logged as FT8 with FT4 sub-mode. - DEFECT Confirmed

on5po
 


Voici la solution, qui a été donnée précédemment, et qui fonctionne  


ON5PO,


De : Support@HamApps.groups.io <Support@HamApps.groups.io> de la part de Jacques Corbu <f1vev@...>
Envoyé : mardi 4 mai 2021 17:21
À : Support@HamApps.groups.io <Support@HamApps.groups.io>
Objet : Re: [HamApps] v2.50.1 Second or third FT8 contact logged as FT8 with FT4 sub-mode. - DEFECT Confirmed
 
Hello 

Ran FT8 this afternoon and  it got logged as FT8 with FT4 submode after a few contacts  cannot say how many . Ic7300  HRD logbook on SQL  and V2.5 JTAlert 

WSJTX frequencies are correct etc  not doubt will be resolved shortly as defect is confirmed Cheers F1VEV Jacques  


locked Re: CHat support without WSJTx

Franco
 

HI ALL, 

There is absolutely no possibility to use the JTalert CHAT (F5) without always having to start WSJTx first and then quit, why don't I use that??

Thanks for info
Franco


locked Re: JTAlert problem with Scan and Rebuild database

Dennis
 

DXView running, DXCC updated, DXKeeper updated no error bu still can't get JAlert to Scan and rebuild database.  :(


locked Re: JTAlert problem with Scan and Rebuild database

Dennis
 

Ok I don';t know what happened but I shut everything down and restarted.  No more error logs.


locked Re: v2.50.1 Second or third FT8 contact logged as FT8 with FT4 sub-mode. - DEFECT Confirmed

Jacques Corbu
 

Hello 

Ran FT8 this afternoon and  it got logged as FT8 with FT4 submode after a few contacts  cannot say how many . Ic7300  HRD logbook on SQL  and V2.5 JTAlert 

WSJTX frequencies are correct etc  not doubt will be resolved shortly as defect is confirmed Cheers F1VEV Jacques  


locked Re: SSL installation

David Gould
 

Thanks that is the info I wanted.
73,
Dave G3UEG


WSJTX and the procedure for installing SSL is documented in the Users
Guide (Help) section 3.2.

Open SSL is only required for loading the LotW Users Data ...

73,

... Joe, W4TV
Hide quoted text


locked Re: JTAlert problem with Scan and Rebuild database

Dennis
 

I updated all the DXCC files, DXkeeper , DXview.  Still getting Error log though.   


locked Re: JTAlert problem with Scan and Rebuild database

Joe Subich, W4TV
 

Are you still getting the errorlog entry?


73,

... Joe, W4TV

On 2021-05-04 10:30 AM, Dennis wrote:
Ok I have the most recent version of DXCC 2.6.1 and did a recompute. The reports seems to all work properly.  It is the interworking with JTAlert that does not work.
Thanks,
Dennis


locked Re: JTAlert problem with Scan and Rebuild database

Dennis
 

Ok I have the most recent version of DXCC 2.6.1 and did a recompute.  The reports seems to all work properly.  It is the interworking with JTAlert that does not work.

Thanks,
Dennis


locked Re: SSL installation

Joe Subich, W4TV
 

WSJTX and the procedure for installing SSL is documented in the Users
Guide (Help) section 3.2.

Open SSL is only required for loading the LotW Users Data ...

73,

... Joe, W4TV

On 2021-05-04 9:25 AM, David Gould wrote:
I am not sure whether it is JTAlert or WSJT-X  (or both) that needs SSL.
I am just setting up a new W10 PC (64bit).  Will it automatically have the correct SSL stuff or do I have to install it myself?   If so, is the latest current version the one to use?   I seem to remember at one time we had to use an earlier version because of a problem with a later version.
Thanks,
Dave G3UEG


locked Re: JTAlert problem with Scan and Rebuild database

Joe Subich, W4TV
 

2021-05-04 12:44:30.673 > program error 0 in module
DXLogModule.OpenSettingsRecords: unable to determine DXCC database
version:

Perhaps this has something to do with it?
Check with AA6YQ on the DXLab Suite list.

Is DXView running? Have you updated it to the most recent public
version of the DXCC database (2.6.1)? Check DXView -> Config ->
Databases then do a "Recompute" in DXKeeper -> Check Progress
(middle of the bottom row).

73,

... Joe, W4TV


On 2021-05-04 9:45 AM, Dennis wrote:
Thanks for the responses.     I am using the default Microsoft Security I added folder exclusions.
How do export the log and create a new database with DXKeeper?
Also I am getting this error indicated in DXKeeper errorlog.txt
2021-05-04 12:44:30.673 > program error 0 in module DXLogModule.OpenSettingsRecords: unable to determine DXCC database version:
Perhaps this has something to do with it?
Thanks for the help
Dennis


locked Re: JTAlert problem with Scan and Rebuild database

WB5JJJ - George
 

Dennis:

Your JTAlert is over a year old.  Perhaps there have been changes in your logging program that is no longer compatible with such an old version of JTA.  Current is 2.50.1 and requires dotNet v5 installed.  Check the HamApps web site for more information.  
--
73's
George - WB5JJJ
Hamshack Holine #4969


locked Re: JTAlert problem with Scan and Rebuild database

Michael Black
 

On Tuesday, May 4, 2021, 08:46:05 AM CDT, Dennis <dgasparotto@...> wrote:


Thanks for the responses.     I am using the default Microsoft Security  I added folder exclusions.   
 
How do export the log and create a new database with DXKeeper?   

Also I am getting this error indicated in DXKeeper errorlog.txt

2021-05-04 12:44:30.673 > program error 0 in module DXLogModule.OpenSettingsRecords: unable to determine DXCC database version: 

Perhaps this has something to do with it?

Thanks for the help
Dennis


locked Re: JTAlert problem with Scan and Rebuild database

Dennis
 

Thanks for the responses.     I am using the default Microsoft Security  I added folder exclusions.   
 
How do export the log and create a new database with DXKeeper?   

Also I am getting this error indicated in DXKeeper errorlog.txt

2021-05-04 12:44:30.673 > program error 0 in module DXLogModule.OpenSettingsRecords: unable to determine DXCC database version: 

Perhaps this has something to do with it?

Thanks for the help
Dennis


locked Re: SSL installation

Michael Black
 

Hmmm...I set up a new PC a few months ago and I don't recall having to install the SSL libraries.

Mike W9MDB





On Tuesday, May 4, 2021, 08:26:10 AM CDT, David Gould <dave@...> wrote:


I am not sure whether it is JTAlert or WSJT-X  (or both) that needs SSL.

I am just setting up a new W10 PC (64bit).  Will it automatically have the correct SSL stuff or do I have to install it myself?   If so, is the latest current version the one to use?   I seem to remember at one time we had to use an earlier version because of a problem with a later version.

Thanks,

Dave G3UEG


locked SSL installation

David Gould
 

I am not sure whether it is JTAlert or WSJT-X  (or both) that needs SSL.

I am just setting up a new W10 PC (64bit).  Will it automatically have the correct SSL stuff or do I have to install it myself?   If so, is the latest current version the one to use?   I seem to remember at one time we had to use an earlier version because of a problem with a later version.

Thanks,

Dave G3UEG

821 - 840 of 35459