Date   

locked Re: Setting up GPS USB dongle

vk3fz
 

Yes I do I had to remove the driver in windows then se the com port manually as it was clashing

 

Sent from Mail for Windows 10

 

From: Richard Lawn
Sent: Saturday, 6 March 2021 8:36 AM
To: Support@HamApps.groups.io
Subject: [HamApps] Setting up GPS USB dongle

 

I got a Glonass U-blox7 GPS GPS stick for my Pi 4b. Despite the tutorial I followed on the internet I have been unable to get it to work. For a while it did show a flashing green light on the dongle suggesting it was trying or actually synced to satellites but now there is nothing. the cat /dev/serial0 seems to show nothing. Does anyone use this GPS lock?

Rick, W2JAZ

 


locked Re: Highlighting wanted dxcc in decodes (not only cq)?

Ron W3RJW
 


--
73
Ron, W3RJW

FTdx-5000, Timewave Navigator, WSJT-x 2.3.0, JTAlert 2.16.17, HRD Deluxe v6.7
FTdx-3000, SignaLink USB


locked Re: Highlighting wanted dxcc in decodes (not only cq)?

Ron W3RJW
 
Edited

That's exactly how it works ...  In fact that is a big advantage of using JTAlert ...  Check your settings ...




--
73
Ron, W3RJW

FTdx-5000, Timewave Navigator, WSJT-x 2.3.0, JTAlert 2.16.17, HRD Deluxe v6.7
FTdx-3000, SignaLink USB


locked Setting up GPS USB dongle

Richard Lawn
 

I got a Glonass U-blox7 GPS GPS stick for my Pi 4b. Despite the tutorial I followed on the internet I have been unable to get it to work. For a while it did show a flashing green light on the dongle suggesting it was trying or actually synced to satellites but now there is nothing. the cat /dev/serial0 seems to show nothing. Does anyone use this GPS lock?

Rick, W2JAZ


locked Re: Cannot get JT Alert to communicate with WSJT-X in New Installation #FT8

g4wjs
 

Thanks Mike!

On 05/03/2021 20:34, Michael Black via groups.io wrote:
The fix was starting a new configuration for JTAlert -- his old one was apparently corrupt.

Had to rebuild his HRD database too as JTAlert was getting stuck reading records (infinite loop that has plagued a few people due to some corruption of the MDB database).

Mike W9MDB




On Friday, March 5, 2021, 01:53:30 PM CST, g4wjs <bill.8@...> wrote:


On 05/03/2021 19:51, wmmcc via groups.io wrote:
> Problem solved with help from Mike.
>
> Thanks so much, Mike!
>
> Bill

Hi Bill,

please pass on the fix so others can find the solution.



--
73
Bill
G4WJS.



--
73
Bill
G4WJS.


locked Re: Cannot get JT Alert to communicate with WSJT-X in New Installation #FT8

Michael Black
 

The fix was starting a new configuration for JTAlert -- his old one was apparently corrupt.

Had to rebuild his HRD database too as JTAlert was getting stuck reading records (infinite loop that has plagued a few people due to some corruption of the MDB database).

Mike W9MDB




On Friday, March 5, 2021, 01:53:30 PM CST, g4wjs <bill.8@...> wrote:


On 05/03/2021 19:51, wmmcc via groups.io wrote:
> Problem solved with help from Mike.
>
> Thanks so much, Mike!
>
> Bill

Hi Bill,

please pass on the fix so others can find the solution.



--
73
Bill
G4WJS.






locked Re: Cannot get JT Alert to communicate with WSJT-X in New Installation #FT8

g4wjs
 

On 05/03/2021 19:51, wmmcc via groups.io wrote:
Problem solved with help from Mike.

Thanks so much, Mike!

Bill
Hi Bill,

please pass on the fix so others can find the solution.



--
73
Bill
G4WJS.


locked Re: Cannot get JT Alert to communicate with WSJT-X in New Installation #FT8

wmmcc@...
 

Problem solved with help from Mike.

Thanks so much, Mike!

Bill


locked Re: Worked B4 issue

Joe
 

Another day, nothing heard.  Should I open a second support request?


locked Re: Highlighting wanted dxcc in decodes (not only cq)?

Daniel <dko1@...>
 

Hi again,

maybe I need to be more precise. What I want is this:




I had put China manually in the wanted DXCC box before. The call is highlighted in the CQ message but also further down in a QSO decode.
So this proves some reaction. But why is JTAlert not synchronising with its own ADIF file?

73
Daniel
DL3IAE



locked call sign spots

Anthony W. DePrato
 

This may be the wrong place to ask this if so i am sorry. but can anyone tell me how to STOP this.

last week i downloaded the latest version of WSJT.rc I have NOT downloaded a new version of jtalert for over a year.
i was on 30 meters calling cq dx and have dxlab running for my logging program.
i now see spots rolling in with my call sign and the source being changing calls from all over the STATES and EU followed by a #.
I figure this is a psk or reverse beacon deal.
i have psk reporter turned off and everything i can find in both WSJT and JTALERT that might transmit spots. i also have this turned off in dxlab.
but i still see spot after spot with my call sign as CQing on 10.036 FT8. and the spotting sources changing with each spot.
any ideals as i DO NOT feel the dx cluster is for spotting stateside station unless a EU station might spot me.
thanks for any help
73 Tony WA4JQS /VP8BZL


locked Re: Highlighting wanted dxcc in decodes (not only cq)?

Daniel <dko1@...>
 

Mike,
In Manage settings -> Alerts -> Wanted DXCC -> Individual bands, I have set "by individual band" and "any mode".
I have picked the 30m band only where the ADIF file has a number of DXCCs.
However, there is a message saying "0 of 340 DXCC entities wanted", which I find strange.
Because on start-up, JTAlert shows a little log scan window, so I assume it shoulkd know which DXCCs I have and what I am looking for.
Or do I have to pick them manually?

Daniel
DL3IAE


locked Re: Highlighting wanted dxcc in decodes (not only cq)?

Daniel <dko1@...>
 

No Larry,

I haven't. But thanks!

Daniel
DL3IAE


locked Re: Highlighting wanted dxcc in decodes (not only cq)?

Larry Banks
 

Hi Daniel,
 
Under ALERTS >> FILTERS do you have “Show CQ Only Callsigns” turned on?

73 -- Larry -- W1DYJ

 

From: Daniel
Sent: Friday, March 05, 2021 7:46
Subject: Re: [HamApps] Highlighting wanted dxcc in decodes (not only cq)?
 
Thanks Mike,

of course it should only highlight the ones I can hear, I forgot to mention.
But apparently it doesn't. Only when the new DXCC is calling CQ.
So tailend possibilities are hard to find, unless I monitor the Band Activity window of WSJT-x.

Daniel


locked Re: Highlighting wanted dxcc in decodes (not only cq)?

Michael Black
 

Do you have alerts by mode/band turned on?

Mike W9MDB




On Friday, March 5, 2021, 06:47:07 AM CST, Daniel <dko1@...> wrote:


Thanks Mike,

of course it should only highlight the ones I can hear, I forgot to mention.
But apparently it doesn't. Only when the new DXCC is calling CQ.
So tailend possibilities are hard to find, unless I monitor the Band Activity window of WSJT-x.

Daniel


locked Re: Highlighting wanted dxcc in decodes (not only cq)?

Daniel <dko1@...>
 

Thanks Mike,

of course it should only highlight the ones I can hear, I forgot to mention.
But apparently it doesn't. Only when the new DXCC is calling CQ.
So tailend possibilities are hard to find, unless I monitor the Band Activity window of WSJT-x.

Daniel


locked Re: Highlighting wanted dxcc in decodes (not only cq)?

Michael Black
 

It should be highlighting those in QSO but only if you hear them.  It won't highlight somebody else calling them.

Mike W9MDB




On Friday, March 5, 2021, 01:48:20 AM CST, Daniel <dko1@...> wrote:


Hi,

I am new to JTAlert and this has surely been asked before.
How can I make JTAlert to highlight wanted dxcc stations that are in QSO, means not only if the call CQ?
The logging function is working, I have an ADIF file which records all my QSOs.
All new DXCCs are highlighted when the call CQ.

Any help?

Tnx
Daniel


locked Highlighting wanted dxcc in decodes (not only cq)?

Daniel <dko1@...>
 

Hi,

I am new to JTAlert and this has surely been asked before.
How can I make JTAlert to highlight wanted dxcc stations that are in QSO, means not only if the call CQ?
The logging function is working, I have an ADIF file which records all my QSOs.
All new DXCCs are highlighted when the call CQ.

Any help?

Tnx
Daniel


locked Re: Application Auto-Start Issue

Patrick Hung
 

I will try as suggested, and report back. Thanks, all!
--
73,

Patrick - W6AJR


locked Re: jtalert cant communicate with wsjt-x

Dave Garber
 

with your same combo, i do not get jtalert filling in the top line until wsjt has lines to forward via udp, then the boxes as well as the top header fill in..   I always assumed this was normal

Dave Garber
VE3WEJ / VE3IE


On Thu, Mar 4, 2021 at 6:23 AM colin via groups.io <csaggers1=sky.com@groups.io> wrote:
Hi All
I know this topic has been asked before but for the life of me i cant work out how to fix it.
I can play with the setting during the day and by hook or by crook {luck} i can get it to work.
Switch of the pc and go to bed and during the night the evil pixies mess it all up and when i come to start up Jtalert cannot get the frequency and then after a few minutes the normal 
splash screen appears.
I am using Jtalert,Wsjt-x and Log4om v2
Many thanks
Colin

3681 - 3700 of 36983