Date   

locked Re: Dozens of WSJT-X config files

Andrew; KF6LU
 

Found 406 files. As with others, my dates go back to August 22, 2020


locked Re: Dozens of WSJT-X config files

Bob, KA2TQV
 

And I had 529 of them, going back to Aug 2020. So, something is clearly not working according to spec. Some configuration change I can make?

Bob, KA2TQV


locked Re: Dozens of WSJT-X config files

Jim W
 

Same here, oldest was from August 2020. I deleted them on Tuesday, except for the last 5. I went in this morning and there are 12 folders. I deleted all except the last 5.

 

73s

 

Jim

VA3XOV

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of Roger M via groups.io
Sent: March 3, 2021 12:11 PM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Dozens of WSJT-X config files

 

Same here. The oldest file was dated Aug 23, 2020. And I don't have any protection SW that is interfering with anything.

On Tue, Mar 2, 2021 at 05:08 PM, Tim N3XX wrote:

I deleted a lot of them here also. The oldest dated file was from
August 2020, so I guess something happened around that time that broke
the automatic file deletions.

73,
Tim - N3XX

On 2021-03-02 1:47 PM, Hasan Schiers N0AN wrote:

I just checked that folder here, and there were 175 files in it. Deleted
all but the one cautioned about.
73, N0AN
Hasan


On Tue, Mar 2, 2021 at 8:37 AM WB5JJJ - George <wb5jjj@...
<mailto:wb5jjj@...
>> wrote:

In checking, I found over 300 files in the folder.  Deleted all but
config.sqlite.

Win10Pro updated
Windows Security (default)

Seems like an error dialog should be displayed if the files can't be
deleted.
--
73's
George - WB5JJJ
Hamshack Holine #4969


 
--
73,
Roger
AC6BW


locked Re: Dozens of WSJT-X config files

Roger- AC6BW
 

Same here. The oldest file was dated Aug 23, 2020. And I don't have any protection SW that is interfering with anything.


On Tue, Mar 2, 2021 at 05:08 PM, Tim N3XX wrote:
I deleted a lot of them here also. The oldest dated file was from
August 2020, so I guess something happened around that time that broke
the automatic file deletions.

73,
Tim - N3XX

On 2021-03-02 1:47 PM, Hasan Schiers N0AN wrote:
I just checked that folder here, and there were 175 files in it. Deleted
all but the one cautioned about.
73, N0AN
Hasan


On Tue, Mar 2, 2021 at 8:37 AM WB5JJJ - George <wb5jjj@...
<mailto:wb5jjj@...>> wrote:

In checking, I found over 300 files in the folder.  Deleted all but
config.sqlite.

Win10Pro updated
Windows Security (default)

Seems like an error dialog should be displayed if the files can't be
deleted.
--
73's
George - WB5JJJ
Hamshack Holine #4969


 
--
73,
Roger
AC6BW


locked Re: Start problem Subscript used on non-accessible variable

Frank IZ7AUH
 

No opportunity to resolve? 


locked JTAlert makes PC slow

K0GU
 
Edited

I've been working on this a lot tonight, reading old posts, etc and I don't quite get it.

I'm running three instances of JTDX rc-155 (153 before that, etc). With each instance of JTAlert I start the typing into the PC gets slower and I think my FT8 decodes get slower. If I have only one instance of JTAlert running I can type character into W10 Notepad fairly smoothly but by the time I'm running three instances of JTAlert typing gets about five seconds behind. I first noticed this when typing messages into the Text Message Window.

I have some delay in my SDR/SDR program so I always use AutoSeq3 so I can have late decoding. But the delay has gotten pretty bad and is running two or more seconds into the xmit sequence. I have a fast computer and the load with three instances of JTDX/JTAlert only uses about 30% of the CPU and 50% if I turn SWL mode on to all JTDXs (I'm listening to dead bands ATM 6m &10m). So to me it doesn't seem to be a resource issue.    

I'm guessing I don't have something setup quite right when it comes to JTDX/JTAlert communication and that is causing the delay??? Can someone post what my settings should look like please (or a link)??? All three instances are working (displaying calls properly). BTW I have no logging program hooked up at all. I'm just using the stand along features in JTDX.

Doctor my brain hurts - (Monty Python)

73,  Jay  K0GU


locked Re: Dozens of WSJT-X config files

Tim N3XX
 

I deleted a lot of them here also. The oldest dated file was from August 2020, so I guess something happened around that time that broke the automatic file deletions.

73,
Tim - N3XX

On 2021-03-02 1:47 PM, Hasan Schiers N0AN wrote:
I just checked that folder here, and there were 175 files in it. Deleted all but the one cautioned about.
73, N0AN
Hasan
On Tue, Mar 2, 2021 at 8:37 AM WB5JJJ - George <wb5jjj@gmail.com <mailto:wb5jjj@gmail.com>> wrote:
In checking, I found over 300 files in the folder.  Deleted all but
config.sqlite.
Win10Pro updated
Windows Security (default)
Seems like an error dialog should be displayed if the files can't be
deleted.
--
73's
George - WB5JJJ
Hamshack Holine #4969


locked Re: Dozens of WSJT-X config files

Joe Subich, W4TV
 

I had some 40 files accumulated in the two weeks since I've been
back on the air (finally got an antenna up). Deleted all except
config.sqlite and the last three days of dated back-ups.

73,

... Joe, W4TV

On 2021-03-02 1:47 PM, Hasan Schiers N0AN wrote:
I just checked that folder here, and there were 175 files in it. Deleted all but the one cautioned about.
73, N0AN
Hasan
On Tue, Mar 2, 2021 at 8:37 AM WB5JJJ - George <wb5jjj@gmail.com <mailto:wb5jjj@gmail.com>> wrote:
In checking, I found over 300 files in the folder.  Deleted all but
config.sqlite.
Win10Pro updated
Windows Security (default)
Seems like an error dialog should be displayed if the files can't be
deleted.
--
73's
George - WB5JJJ
Hamshack Holine #4969


locked Re: Dozens of WSJT-X config files

Hasan Schiers N0AN
 

I just checked that folder here, and there were 175 files in it. Deleted all but the one cautioned about.
73, N0AN
Hasan


On Tue, Mar 2, 2021 at 8:37 AM WB5JJJ - George <wb5jjj@...> wrote:
In checking, I found over 300 files in the folder.  Deleted all but config.sqlite.  

Win10Pro updated
Windows Security (default)

Seems like an error dialog should be displayed if the files can't be deleted.  
--
73's
George - WB5JJJ
Hamshack Holine #4969


locked Re: Dozens of WSJT-X config files

WB5JJJ - George
 

In checking, I found over 300 files in the folder.  Deleted all but config.sqlite.  

Win10Pro updated
Windows Security (default)

Seems like an error dialog should be displayed if the files can't be deleted.  
--
73's
George - WB5JJJ
Hamshack Holine #4969


locked Re: loggong

Tom Job
 

Good day….

 

Here’s a screen shot of the API settings.  Only check the first check box, not the bottom one.

 

Also, the logging program MUST be running before you start JTAlert else you will get an error, which makes sense because there will be no server to connect to. J

 

I use the auto-start feature in JTAlert and it starts the log, then WSJT and then JTAlert.  Very simple.

 

GL…de Tom

 

 

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of Rickey via groups.io
Sent: March 2, 2021 07:23
To: Support@HamApps.groups.io
Subject: Re: [HamApps] loggong

 

Keith, have you set the API under Settings of the N3FJP logging software? Open the logging program, select Settings, scroll down to the bottom and you'll see the API.




Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com



locked Re: loggong

Jim N6VH
 

On 3/1/2021 8:34 PM, KEITH A JOHNSON - N8IKT / WV8KJ via groups.io wrote:
Hello guys , Im hoping that some of you all can help me . Im using N3Fjp logging software and Scott , the owner of the software , which Ive had for several years and I really like it, is telling me to give the group that runs this wsjt/x software and have them go to this web site to do some kind of api settings ,I think so I can use both programs together ,which would be greatly appriceated . The web site is , and I hope some of you guys know what hes talking about , Im really new to digital work and dont have a new rig but Im using a rig blaster plus to help me with my ft'8 . The web site is N3FJP.com/help/api.html. Im using a ft1000mp mark V field and the program work fine but when I try to use the logging the logging software with it it dont work together because they both work on the same port.I have to put the calls into the software and freq and all the stuff that needs to be done in the computer , so please can you make these two programs work together ? He said that it needs some kind of code put into the app so they will work together. I know nothing about how to ask for what he said but Im trying my best , which is not much for an ole coal miner doing new stuff with my ham radio.
                              Thanks guys   Keith Johnson WV8KJ
Keith,

In JTAlert, go to Help - Open Help File. In the help file, click on Settings - Logging - ACLog.

73,

Jim N6VH


locked Re: loggong

Rickey
 

Keith, have you set the API under Settings of the N3FJP logging software? Open the logging program, select Settings, scroll down to the bottom and you'll see the API.


locked loggong

KEITH A JOHNSON - N8IKT / WV8KJ <n8ikt@...>
 

Hello guys , Im hoping that some of you all can help me . Im using N3Fjp logging software and Scott , the owner of the software , which Ive had for several years and I really like it, is telling me to give the group that runs this wsjt/x software and have them go to this web site to do some kind of api settings ,I think so I can use both programs together ,which would be greatly appriceated . The web site is , and I hope some of you guys know what hes talking about , Im really new to digital work and dont have a new rig but Im using a rig blaster plus to help me with my ft'8 . The web site is N3FJP.com/help/api.html. Im using a ft1000mp mark V field and the program work fine but when I try to use the logging the logging software with it it dont work together because they both work on the same port.I have to put the calls into the software and freq and all the stuff that needs to be done in the computer , so please can you make these two programs work together ? He said that it needs some kind of code put into the app so they will work together. I know nothing about how to ask for what he said but Im trying my best , which is not much for an ole coal miner doing new stuff with my ham radio.  
                              Thanks guys   Keith Johnson      WV8KJ     


locked Re: Worked B4 issue

Laurie, VK3AMA
 

On 2/03/2021 7:28 am, Joe wrote:
I have sent the session files
I responded to your support request asking for additional files. I am still waiting for those.

de Laurie VK3AMA


locked Re: Worked B4 issue

Joe
 

Laurie:

I have sent the session files.  This issue is demonstrable at the moment in my station.  I check the ignore before box, set today's date, and even though I have made no QSOs since 2/28/21, I have stations marked in WSJTX as seen before.

I am sorry if I offended anyone by asking the question in the forum rather than immediately filing a support contact.  It has been my observation and experience that many issues get resolved by someone else in the group who has a quick answer.  What else is the forum for?  And to restate the obvious, of course I am interested in a solution.  Why else would I have posted?

As I have told you previously, I have relied on JTAlert since I set up my station a couple of years ago.  And I am pretty sure that I have used the Ignore B4 feature in past contests.  So something has changed here.

73s,

Joe/WQ6Q


locked Re: Worked B4 issue

Joe
 

Will do!


locked Re: mshv #HamSpots

Laurie, VK3AMA
 


On 2/03/2021 2:31 am, Joe Subich, W4TV wrote:

No and No.  MSHV have removed the UDP interfaces from the WSJTX
code on which JTAlert relies.


73,

   ... Joe, W4TV

Joe,

The problem is not the removal of functionality, it is that critical status changes are not being conveyed via the UDP status message. Specifically, when ever the DXCall is changed (your QSO partner) and when there is a band change, the Status message is never generated. There is no way to know who your working or on what band when these change. The UDP status message coming from MSHV does contain this data, but it is never sent. The Status message does get generated when there is a Mode change, at which time the current DXall and Band/Frequency can be determined. Why reporting Mode changes but not Band or DXCall changes is more important is unclear to me. The UDP overhead is minor compared to the high volume decode messages.

These are show-stopper failures not just for JTAlert but any 3rd party program that wants to integrate with MSHV. Knowing who your working (to facilitate log lookups) or what band your on (to facilitate band specific alerting of wanted entities) are critical bits of information.

When this lack of Status message generation on critical status changes was pointed out to the MSHV author, his response was "this is MSHV not WSJT-X". I gave up trying to convince him this was a real problem after that exchange.

de Laurie VK3AMA


locked Re: mshv #HamSpots

 

Thanks gents, I figured Laure would not add that. Oh well back to JTAlert no problem with that.
73

--
DAVE NU4N


locked Re: mshv #HamSpots

Joe Subich, W4TV
 

No and No. MSHV have removed the UDP interfaces from the WSJTX
code on which JTAlert relies.


73,

... Joe, W4TV

On 2021-03-01 10:17 AM, Dave Tucker Nu4N wrote:
Will JT Alert with MSHV software. Or is it in the future??
73's
--
DAVE NU4N

4581 - 4600 of 37833