Date   

locked Re: Idea for Text Message Users

Guy G4DWV 4X1LT
 

If I want more than a basic QSO, I do not use any JT/FT modes. Simples!
--
73 de Guy G4DWV 4X1LT


locked JTAlert name

Michael Black
 

Laurie...I have a task mangement program that I'm close to releasing.

But if multiple JTAlert processes are started it can't tell the difference between them.

Would it be possible to add a /name=XXX option so each instance could have a unique name -- that way I can associate the task entry with a specific JTAlert window.

Unless you know of some other way to associate one JTAlert to a specific instance.

Mike W9MDB



locked Re: Idea for Text Message Users

WB8ASI Herb
 

Thanks so much Laurie.  Having fun this evening using the Decodes Window underlining for text to quickly say thanks for the QSO, and tossing in any other comment if we make a connection.  Makes a good connection beyond just the basic QSO.   My friend often asks me if I'm on my FAX machine rather than on my radio. LOL


locked Re: New Feature Enable Fill In Circle for On Line Text Messages?

Laurie, VK3AMA
 



On 20/11/2020 9:53 pm, Hasan Schiers N0AN wrote:
I usually don't have enough monitor real estate to have that window open. Will play with it.
73, N0AN
Hasan

FYI, you can restrict which columns are displayed in the Decodes window, right down to a single "Callsigns" column if desired.

de Laurie VK3AMA


locked Re: LOTW data is often wrong

Laurie, VK3AMA
 

On 18/11/2020 4:17 am, Torsten - DL9GTB wrote:
unfortunately for a long time I have had to find out again and again that the LOTW data is often incorrect or not up-to-date. How can I improve this?

73 de Torsten - DL9GTB
Torsetn,

Do you still what me to look into this for you? If so, I will need an example Callsign (one is enough) that is being reported incorrectly from JTAlert. I can't do any investigation without a problem callsign to examine and trace through the different source files and the scripts used to generate the Callsigns database.

de Laurie VK3AMA


locked Re: ADIF file will not ..

HamApps Support (VK3AMA)
 

On 21/11/2020 11:00 am, Rick Wyrwas wrote:
Jtalert loads a arid file but I can’t find at time this file or when I do won’t load to LOTW. Driving me nuts

The JTAlert Settings, "Logging -> Standard ADIF File" section, shows you where the ADIF file is located. You can use the Select button which opens a selection dialog from which you can copy the File location from the top navigation area.

eg.



de Laurie VK3AMA



locked Re: RR73 73 PROBLEM

HamApps Support (VK3AMA)
 

On 20/11/2020 8:31 am, tonypedro wrote:
dear colleague, please tell me how this alert is turned off. thanks qrv atte LU1wh



The Release notes for the new JTAlert version has the answer...
    - WSJT-X Decode Highlighting: "73" or "RR73" decode highlighting no longer
       require the CQ Alert to be enabled. A dedicated setting is now available.
       See the "Applications -> WSJT-X / JTDX" section of the Settings window.
       Note: This and other color highlighting is not available for JTDX.

de Laurie VK3AMA


locked Re: Unexpected announcement

HamApps Support (VK3AMA)
 

On 21/11/2020 5:39 am, John Holmes W9ILY wrote:
I was quite surprised and pleased when I heard an audio announcement for a new state for my WAS. When I looked at the JTAlert decode listing, it was full of calls as the band was very busy and my "new state" callsign was actually below those that were displayed on the four decode lines and was off the screen. I think it is great that the audio announcement data reads all of the decodes, not just the ones that are displayed. Everything appears in the decodes window, of course. This is another reason to keep the decodes window open.Thanks, Laurie.
73,
John W9ILY
Good stuff.

BTW, you can have the main JTAlert window set to no display lines and decodes will continue to be displayed in the Decodes Window and Alerts will still be generated. That is how I run JTAlert here.

de Laurie VK3AMA


locked Re: Decode Window Problem - Defect Confirmed

HamApps Support (VK3AMA)
 

I can confirm this defect.

The error is triggered when changing the "Highlight excess DT" threshold value in the Settings when the Windows regional-settings utilizes a non-dot for the decimal separator.

It has been corrected for the next release.

de Laurie VK3AMA


locked Re: ADIF file will not ..

Rick Wyrwas
 


No am having problems with my computer I don’t know if it’s windows 10 or what. I can manually enter a QSO the TQsl loads correctly into LOTW. Jtalert loads a arid file but I can’t find at time this file or when I do won’t load to LOTW. Driving me nuts

WA9JBQ 

On Fri, Nov 20, 2020 at 9:58 AM André C <acme9283@...> wrote:
Have you signed your adif file with TQSL before uploading ?

--
Rick Wyrwas


locked Unexpected announcement

John Holmes W9ILY
 

I was quite surprised and pleased when I heard an audio announcement for a new state for my WAS. When I looked at the JTAlert decode listing, it was full of calls as the band was very busy and my "new state" callsign was actually below those that were displayed on the four decode lines and was off the screen. I think it is great that the audio announcement data reads all of the decodes, not just the ones that are displayed. Everything appears in the decodes window, of course. This is another reason to keep the decodes window open.Thanks, Laurie.
73,
John W9ILY


locked Re: RR73 73 PROBLEM

Tom Melvin
 

Perhaps you can shed some light on what ‘this alert’ is 


or look back at previous reply.

Tom
GM8MJV


On 19 Nov 2020, at 21:31, tonypedro <apghione@...> wrote:

dear colleague, please tell me how this alert is turned off. thanks qrv atte LU1wh



El jue., 19 de noviembre de 2020 17:07, stevemm0sjh via groups.io <mm0sjh=btopenworld.com@groups.io> escribió:
There seems a problem with the decodes of RR73 and 73 its comming with a stupid alert,where do you switch that off?




locked Re: ADIF file will not ..

André C
 

Have you signed your adif file with TQSL before uploading ?


locked Re: New Feature Enable Fill In Circle for On Line Text Messages?

Barry VA7GEM
 

On Thu, Nov 19, 2020 at 02:19 PM, HamApps Support (VK3AMA) wrote:

The full release notes entry reads...
    - Decodes Window Online Indicators: Callsigns that are online for text message
       receipt will be shown with an underline, the same as the main JTAlert
       Callsigns display. A new online indicator, a filled circle, can be shown
       in the top-right corner of the Callsign display cell.

This applies to the Decodes Window only. You need to look in the Decodes Window Settings.


de Laurie VK3AMA


Thank you
I have spent days trying to find that.
Barry


locked Re: RR73 73 PROBLEM

tonypedro
 

dear colleague, please tell me how this alert is turned off. thanks qrv atte LU1wh



El jue., 19 de noviembre de 2020 17:07, stevemm0sjh via groups.io <mm0sjh=btopenworld.com@groups.io> escribió:
There seems a problem with the decodes of RR73 and 73 its comming with a stupid alert,where do you switch that off?


locked Re: New Feature Enable Fill In Circle for On Line Text Messages?

Hasan Schiers N0AN
 

Thanks, I usually don't have enough monitor real estate to have that window open. Will play with it.
73, N0AN
Hasan


On Thu, Nov 19, 2020 at 4:19 PM HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:
On 20/11/2020 8:46 am, Hasan Schiers N0AN wrote:
New feature listed, but I can't find where to turn it on:
2.16.16
A new online indicator, a filled circle, can be shown
       in the top-right corner of the Callsign display cell.
TIA, 73, N0AN

The full release notes entry reads...
    - Decodes Window Online Indicators: Callsigns that are online for text message
       receipt will be shown with an underline, the same as the main JTAlert
       Callsigns display. A new online indicator, a filled circle, can be shown
       in the top-right corner of the Callsign display cell.

This applies to the Decodes Window only. You need to look in the Decodes Window Settings.


de Laurie VK3AMA



locked Re: Decode Window Problem

HamApps Support (VK3AMA)
 

On 20/11/2020 9:50 am, André C wrote:
I tried to open the Decode Window (F9) and when entering in the settings and trying to set the threshold to 1 sec, I got the error message..
See the attached file for the message

73 André VE2WNF
Please use the "Help" -> "Contact Support" menu, on the main JTAlert window, to send me your JTAlert files for analysis.

de Laurie VK3AMA



locked Decode Window Problem

André C
 

Hello Laurie,  I tried to open the Decode Window (F9) and when entering in the settings and trying to set the threshold to 1 sec, I got the error message..
See the attached file for the message

73 André VE2WNF


locked Re: does not work

HamApps Support (VK3AMA)
 

On 20/11/2020 8:46 am, Mark KB7N wrote:

Does not work. Would not trans decoded call to WSJT-x.

 

Reloaded 2.16.6 to get back on the air.

 

What does not work? Please be descriptive with your fault description, avoiding abbreviations or slang.

de Laurie VK3AMA


locked Re: New Feature Enable Fill In Circle for On Line Text Messages?

HamApps Support (VK3AMA)
 

On 20/11/2020 8:46 am, Hasan Schiers N0AN wrote:
New feature listed, but I can't find where to turn it on:
2.16.16
A new online indicator, a filled circle, can be shown
       in the top-right corner of the Callsign display cell.
TIA, 73, N0AN

The full release notes entry reads...
    - Decodes Window Online Indicators: Callsigns that are online for text message
       receipt will be shown with an underline, the same as the main JTAlert
       Callsigns display. A new online indicator, a filled circle, can be shown
       in the top-right corner of the Callsign display cell.

This applies to the Decodes Window only. You need to look in the Decodes Window Settings.


de Laurie VK3AMA


6301 - 6320 of 38526