Date   

locked Re: UR5EQF

Willi Passmann
 

Carl,

this seems to be the website of UR5EQF
https://ur5eqf.ru/download/ur5eqf_log

Download not tested by me.

vy 73,
Willi, DJ6JZ

Am 18.08.2020 um 20:29 schrieb Carl - WC4H via groups.io:

[Edited Message Follows]

Hi Jorge.

I have looked at UR5EQF and cannot find a version after May 19, 2015.  It does not include several new modes, notably FT8 or FT4.  There appears to be no support for it.  It also can only use Omnig rig as the radio interface, which is a limitting factor for radio control.

Do you have a more current version?  If so, please share location to download.

73.
Carl - WC4H



locked Re: UR5EQF

Carl - WC4H
 
Edited

Hi Jorge.

I have looked at UR5EQF and cannot find a version after May 19, 2015.  It does not include several new modes, notably FT8 or FT4.  There appears to be no support for it.  It also can only use Omnig rig as the radio interface, which is a limitting factor for radio control.

Do you have a more current version?  If so, please share location to download.

73.
Carl - WC4H


locked UR5EQF

Jorge Manuel
 

It wolud be fine to have the opportunity to have the solution for UR5EQF in the logging of JTAlert!

J

Kind regards,

 

JORGE-EA2DDE


locked UR5EQF as log

Jorge Manuel
 

I'm ussing since years UR5EQF as log. It would be nice to have JTAlert for "conncecting" direclly to it.  Until today I'm not able to upload automatically
the QSO or the QRZ I'm calling with JTDX to UR5EQF (since JTAlert has been install).  it would be fine if someone has experience with this topic. 


locked JT ALERT 2.16.12

rrex lehman
 

I was using an older version of JT Alert for many months and recently had an Windows error message and it stopped working. So uninstalled the old version JT Alert and reinstalled latest JT ALERT 2.16.12 which worked for 30 minutes but then stopped displaying stations decoded in WSJT-X.  No Windows error message just does not show any stations that are in WSJT-X..
Thanks for reading and any assistance appreciated.
Rex
WB8TDG


locked Re: Reinitialize the logs

g4wjs
 

On 17/08/2020 14:26, Wayne Morris wrote:
I don't want to change my logging process from WSJT since it is working perfectly as it is.
Wayne,

clearly it is not for the very reasons you have stated. If you use JTAlert then you should be logging QSOs via JTAlert, that's the only way that JTAlert can keep track of the current position.



--
73
Bill
G4WJS.


locked Reinitialize the logs

Wayne Morris
 

I have been using JT Alert with WSJT-X. The needed lists and worked before are not correct. Short of deleting everything in JT Alert and reinstalling, is there a way to force the program to read my HRD logs and rebuild the list it uses? I don't let JT Alert send logbook entries to HRD Log. I have WSJT do it. I have tried enabling HRD Logging in JT Alert, rebuilding, and then disabling HRD Log in JT Alert. It appears to process the log but it is still providing alerts for calls that I know I don't need. For example, new continent. This is the only method that seems available but I suspect there is an easier way.

I don't want to change my logging process from WSJT since it is working perfectly as it is.

Thanks for any assistance.


locked Re: IC 7000 and Signal Link #FT8 - CAT Control fails #FT8

B. Smith <bill.n3xl@...>
 

Wsjt-x is more sensitive to RFI. Get some ferrite beads and or a feedline choke. 

On Aug 17, 2020 06:58, m_scot_alex <amsctalx@...> wrote:
Name? Callsign?

JTAlert has nothing to do with rig control - that's entirely in WSJT-X. You might want to post this in the WSJT-X group:

https://wsjtx.groups.io/g/main/topics 

73,

Mike - N8MSA


locked Re: IC 7000 and Signal Link #FT8 - CAT Control fails #FT8

m_scot_alex
 

Name? Callsign?

JTAlert has nothing to do with rig control - that's entirely in WSJT-X. You might want to post this in the WSJT-X group:

https://wsjtx.groups.io/g/main/topics 

73,

Mike - N8MSA


locked Re: Log Confirmation Popup Audio

ve7gtc
 

Thanks Laurie (and others).
For some reasdon as I mentioned I somehow skipped v.9 and didn't see the release notes. All good now.

Gus  K2GT


locked Re: Log Confirmation Popup Audio

Chuck Adams
 

In the latest version, it is NOW under JTAlert > Settings > Miscellaneous Alerts > Windows Notifications.  It was right there in the Release Notes like Laurie said if I just bothered to read them.  I am a damn idiot.

Sent from my T-Mobile 5G Device


From: Support@HamApps.groups.io <Support@HamApps.groups.io> on behalf of HamApps Support (VK3AMA) <vk3ama.ham.apps@...>
Sent: Sunday, August 16, 2020 8:00:18 PM
To: Support@HamApps.groups.io <Support@HamApps.groups.io>
Subject: Re: [HamApps] Log Confirmation Popup Audio
 
On 17/08/2020 8:48 am, ve7gtc wrote:
I have lost the log confirmation popup audio. It last worked for me in version.8. I do not have .9, but it does not work in .10, .11, or the current .12. Am I missing something?
Gus  K2GT

Try reading the release notes.

For your convenience ...
2.16.9 (18-Jul-2020)

  Changes:

    - Windows notification sounds: Used by some JTAlert popup messages, like logging
       success/failure, have been replaced with a dedicated sound file/volume
       selection. See the "Alerts -> Miscellaneous Alerts -> Windows Notifications"
       section of the Settings window.

de Laurie VK3AMA


locked Re: Log Confirmation Popup Audio

HamApps Support (VK3AMA)
 

On 17/08/2020 8:48 am, ve7gtc wrote:
I have lost the log confirmation popup audio. It last worked for me in version.8. I do not have .9, but it does not work in .10, .11, or the current .12. Am I missing something?
Gus  K2GT

Try reading the release notes.

For your convenience ...
2.16.9 (18-Jul-2020)

  Changes:

    - Windows notification sounds: Used by some JTAlert popup messages, like logging
       success/failure, have been replaced with a dedicated sound file/volume
       selection. See the "Alerts -> Miscellaneous Alerts -> Windows Notifications"
       section of the Settings window.

de Laurie VK3AMA


locked Re: Log Confirmation Popup Audio

Chuck Adams
 

On JTAlert > Settings > Manage Settings > Window > Pop-up Windows 

My latest version of JTAlert does NOT show ANY area to select "sounds for successful log and sounds for failure log."  The top portion of that window is blank.

I have not been able to find where to restore this lost functionality. 

I must be losing my mind.

Any suggestions?

Thanks and 73,

Chuck Adams
KV4VT 


Sent from my T-Mobile 5G Device



-------- Original message --------
From: Joseph Baker <joebaker324@...>
Date: 8/16/20 6:51 PM (GMT-05:00)
To: Support@hamapps.groups.io
Subject: Re: [HamApps] Log Confirmation Popup Audio

Go to settings, window, pop up and select sounds for successful log and sound for failure log. 

On Sun, 16 Aug 2020 at 23:49, ve7gtc <ve7gtc@...> wrote:
I have lost the log confirmation popup audio. It last worked for me in version.8. I do not have .9, but it does not work in .10, .11, or the current .12. Am I missing something?
Gus  K2GT







--
Sent from iPhone 8 Plus


locked IC 7000 and Signal Link #FT8 - CAT Control fails #FT8

Angryconservative
 

Good evening....

I have ran WSJT-X and JT Alert from what seems the beginning.... Love the software.....  I run an IC 7000 with a west mountain plug and play due to the features, being it is compact and mobile as I have set it up as a Mobile EMCOMM system in a 1510 Pelican.  it is my primary digital unit for mobility..  I recently changed the West Mountain to a Signal Link for a couple of reasons...  I wanted to remove the dedication of the radio using the PC sound card and wanted to switch to a standard that all of my digital software assets.

The Problem is...as I configured each software package.... First FLDIGI, then Winlink...Cat control was very easy... and adjustments to power output to the platform was equally easy....

But with WSJT....all of it started out rather easy... RX/TX and PPT control etc...initially setting the Radio control to VOX as was required.  Once the Audio settings was set, FT8 was rolling... clean and easy.  Net step was to setup the CAT control... ICOM radio...  COM port the USB cable to the CAT control port on the back of the radio....  WSJT saw the com port, 8,2, none.  basically the same settings as the plug an play.... worked great for about two days...   I was on 40, the radio would try and click over the 20 meter without my input... CAT control stopped working, trying to change frequencies completely rendered my station unusable... Somehow the condition led to the dreaded error...*INI file not being found, HAMLIB error etc....I ended up having to reinstall WSJT-X and set the radio without CAT controls...it is working but without any CAT control...

But, FLDIGI and Winlink continue to work without any issue.  

I am running the latest version of WSJT-X 2.2.2 and JTALERT all drivers updated on Windows 10....

If anyone has any idea's as to why one day it works, then next it stops, it would be appreciated 


locked Re: Log Confirmation Popup Audio

Joseph Baker <joebaker324@...>
 

Go to settings, window, pop up and select sounds for successful log and sound for failure log. 

On Sun, 16 Aug 2020 at 23:49, ve7gtc <ve7gtc@...> wrote:
I have lost the log confirmation popup audio. It last worked for me in version.8. I do not have .9, but it does not work in .10, .11, or the current .12. Am I missing something?
Gus  K2GT







--
Sent from iPhone 8 Plus


locked Log Confirmation Popup Audio

ve7gtc
 

I have lost the log confirmation popup audio. It last worked for me in version.8. I do not have .9, but it does not work in .10, .11, or the current .12. Am I missing something?
Gus  K2GT


locked Three Screen Shot Examples of Seemingly Inconsistent Wanted Grid Alerts in JTAlert

Chuck Adams
 

Preliminary Disclaimer:  I am a BIG, BIG fan of JTAlert!  It makes using WSJT-X a JOY!  Bless you Laurie! 

My Current Computer Environment:  All latest versions and updates of:  Windows 10, WSJT-X, JTAlert.

Specific/Relevant JTAlert Setting:  Wanted Grid Tracking set to:  ANY BAND and ANY MODE

Issue Description:  JTAlert "seems" to give me incorrect NEW GRID ALERTS even on stations that have: 

  1. Been successfully worked and logged one or more times
  2. Show up in the WSJT-X log correctly
  3. Valid Grid Numbers in the WSJT-X logs for each QSO


Example 1:  N3MK has already been successfully worked and logged three (3) times.  It appears in the WSJT-X log correctly (including the Grid Square FM27 ).

Yet JTAlert shows N3MK as a NEW GRID with a B4 flag no less.

How can this be?






Example 2:  6E6E has been successfully worked and logged twice.  It appears in the WSJT-X log correctly (including the Grid Square EK09).

Yet JTAlert shows 6E6E as a NEW GRID 

How can this be?


Example 3:  Same scenario.  How can this be?



Am I missing something here?

This seems to be an inconsistent processing of Grid Square data and/or incorrect Wanted Grid Alerts.

HELP!

Thanks and 73,

Chuck Adams
KV4VT


locked Re: Version Numbers

Marlo Montanaro - KA2IRQ
 

Hi Laurie,

I figured it was something simple like that.  Carry on!

73,
Marlo- KA2IRQ


locked Re: Entity Naming Conventions

Barry Murrell ZS2EZ
 

Thanks Laurie – that will be brilliant!!

 

Between JTAlert and DXLabs (my logging suite of choice) the support is astonishing – add MicroHam into the mix and I am one very contented operator!!

 

73 de BARRY MURRELL ZS2EZ

KF26ta - Port Elizabeth, South Africa

EPC#0558 DMC#1690  30MDG#4081

DXCC HONOR ROLL (332/340)

website : www.zs2ez.co.za

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of HamApps Support (VK3AMA)
Sent: Sunday, 16 August 2020 01:28
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Entity Naming Conventions

 

On 14/08/2020 5:21 pm, Barry Murrell ZS2EZ wrote:

Hi Laurie

 

Having loaded the latest version of JTAlert I am now seeing the change to the name of South Africa – now Republic of South Africa.

 

Must say, I haven’t heard my home country referred to as “Republic of South Africa” in ages!!  J

 

This has however raised a conundrum : In JTAlert this just shows as “Rep. Of”…. Not distinguishable from the other 4 Republic Ofs (Korea, Kosovo, South Sudan and Congo). Kind of got used to F.R. meaning Germany, but at a glance both Kosovo and South Sudan start with a Z, which makes matters worse!!

 

As JTAlert only has a VERY small field to display the name (and to the best of my understanding does not actually transfer the name, but rather the DXCC entity number when logging), surely either a shorter (and more readable) option would make more sense…. Or alternatively a way to enlarge the blocks to enable the whole name to be read??

 

Sure, I know that we are supposed to know our prefixes… but some of us are getting a bit slower nowadays!!  J

 

73 de BARRY MURRELL ZS2EZ


Barry.

I changed the naming of "South Africa" to "Republic of South Africa" after a number of requests and some private email exchanges. Changing the name was not clear-cut, as different sources handle the name differently. From one of the email discussions I had on this...

"South Africa" is used by both the ADIF and ARRL and JTAlert has followed that lead, yet looking at DXKeeper, it lists "Republic of South Africa", who is right/wrong in this situation?

LOTW uses 

REPUBLIC OF SOUTH AFRICA


ClubLog uses REPUBLIC OF SOUTH AFRICA


The ARRL is not consistent, with LoTW providing a different naming from the official entities list provided on the ARRL website.

In making my final decision as to which name to go with, I looked to Wikipedia, which indicates that "Republic of South Africa" is the official name. So I went with that.

It looks to me like the ADIF standard and the ARRL are both out of date.

As for the country name field (often abbreviated or truncated) below the Callsign display of JTAlert, I have made some further changes to utilize the common names of some countries rather than trying to abbreviate the long name.
A sample of upcoming changes.

Republic of Korea -> South Korea
Republic of Kosovo -> Kosovo
Republic of South Africa -> South Africa
Republic of South Sudan -> South Sudan
Republic of the Congo -> The Congo


de Laurie VK3AMA


locked Re: Entity Naming Conventions

HamApps Support (VK3AMA)
 

On 16/08/2020 12:35 pm, Joe Subich, W4TV wrote:
This one is dangerous ... There are *TWO* countries called "Congo"
9Q - Democratic Republic of the Congo (Kinshasa)
TN - Republic of the Congo (Leopoldville)

73,

   ... Joe, W4TV
Tnx Joe,

I already had 9Q taken care of, its short name is "D.Rep. Congo"

de Laurie VK3AMA

5821 - 5840 of 36983