|
locked
Re: Cat Setup
d_ziolkowski
Noel- use ft857 as the radio, more details at WSJTX groupio Dan KC2STA
On Sat, Aug 1, 2020 at 2:15 PM n3nz Noel <n3nz@...> wrote: My rig is a Yaesu 897D win10 64 --
Dan Ziolkowski KC2STA SKCC #4290T Ubuntu LINUX
|
|
|
|
locked
Re: No Audio ] JTAlert 2.16.10
Mark Robinson
I loaded version 2.14.2 back over the latest version and now the
sound is working again.
toggle quoted messageShow quoted text
On 01-Aug-20 2:29 PM, Mark Robinson
wrote:
I just installed JTAlert 2:16:10 from 2.14.2 on my win 7 pro 64 bit machine and my previously working sounds are no longer playing on JTAlert. The sound files are still in the correct location and Winamp will play them. JTAlert is pointed to the right sound file and to the right sound device but the sounds do not play and the Test Sound buttons do not play any sounds either.
|
|
|
|
locked
Re: No Audio ] JTAlert 2.16.10
chas cartmel
Mark 73 Charlie G4EST www.g4est.me.uk
From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of Mark Robinson
Sent: 01 August 2020 19:30 To: Support@HamApps.groups.io Subject: Re: [HamApps] No Audio ] JTAlert 2.16.10
I just installed JTAlert 2:16:10 from 2.14.2 on my win 7 pro 64 bit machine and my previously working sounds are no longer playing on JTAlert. The sound files are still in the correct location and Winamp will play them. JTAlert is pointed to the right sound file and to the right sound device but the sounds do not play and the Test Sound buttons do not play any sounds either. On 31-Jul-20 5:07 AM, chas cartmel wrote:
|
|
|
|
locked
Re: No Audio ] JTAlert 2.16.10
Mark Robinson
I just installed JTAlert 2:16:10 from 2.14.2 on my win 7 pro 64 bit
machine and my previously working sounds are no longer playing on
JTAlert. The sound files are still in the correct location and
Winamp will play them. JTAlert is pointed to the right sound file
and to the right sound device but the sounds do not play and the
Test Sound buttons do not play any sounds either.
toggle quoted messageShow quoted text
If I select Sound Off and then press Test Sound Output, I get the error window and a windows sound Is there an easy way to go back to version 2.14.2 ? thanks Mark N1UK
On 31-Jul-20 5:07 AM, chas cartmel
wrote:
|
|
|
|
locked
Cat Setup
n3nz Noel
My rig is a Yaesu 897D win10 64
When starting wsjtx a note opens saying "Rig failure Hamlib error:Target VFO unaccessible while getting current frequency". I really don't know where to look and fix the problem. Appreciate all the help (simplified) to move forward with the program. 73, Noel (OM) N3NZ
|
|
|
|
locked
Re: Wanted DXCCs V.2.16.10 Band 4 m
Good afternoon Laurie, I will try to explain myself better and I trust the Google translation ... Under normal conditions, when I am working in WSJT, in the band, example, 20 meters, when opening the searched DXCC, the data is represented in the 20 meter band; If you are in the 4 meter band, when performing the same operation, the data sheet with the 160 meter band title appears. Well it is true, as you just indicated, that you can access by clicking on the corresponding band, and it is so, it works. It is not a band that has activity and that is why I did not use it and did not know that it comes out like 160 meters, but with the solution provided, you change it that is important. Cordially, Jesús, EA1YR
El sáb., 1 ago. 2020 a las 3:19, HamApps Support (VK3AMA) (<vk3ama.ham.apps@...>) escribió:
|
|
|
|
locked
Re: AutoIT error; JTalert
No improvements :(
I did set priority to real time and installed right off the C: drive root. Laurie - The EXE file (in zip form) is on the way. THANK YOU ALL FOR THIS GREAT SUPPORT! Joe
|
|
|
|
locked
Re: Decodes problem
John. Probably C:\\Users\John???\AppData\Local\HamApps\JTAlert\YOUR_CALLSIGN\Decode\
|
|
|
|
locked
Re: Will not launch - error
HamApps Support (VK3AMA)
On 31/07/2020 5:26 am, Joe Roth wrote:
I deleted all the file & folders including those in localappdata. If that folder/files deletion included the JTAlert installation directory, my only other suggestion is that you try installing to a different location out-side the "Program Files..." directories. I am thinking a possible security/permissions issue, perhaps something broken within the File System. Its probably worth running an Disk Error check, you may have a bad sector. de Laurie VK3AMA
|
|
|
|
locked
Re: Wanted DXCCs V.2.16.10 Band 4 m
HamApps Support (VK3AMA)
On 31/07/2020 6:02 am, Jesus wrote:
I see an error opening Wanted DXCCs .. on the 4 meter band, because the 160 meter band comes out. I can't replicate this behavior. Clicking the appropriate Band button on the DXCC Alert settings will display the required Band. What makes you think that 160m is being displayed rather than 4m? de Laurie VK3AMA
|
|
|
|
locked
Re: AutoIT error; JTalert
HamApps Support (VK3AMA)
On 31/07/2020 8:41 am, Joe Roth wrote:
I repeated the un-install, directory and registry clean up. Whatever the problem, given the consistency of the failure, my guess is that the cause is specific to your Windows environment. Users who have experienced these AutoIT errors have reported that the frequency is inconsistent (random) and not on every execution. I don't recall other reports of the failure occurring when trying to open the Settings. I am thinking a possible security/permissions issue with the JTAlert installation directory. Try installing JTAlert to a directory outside the Windows protected "Program Files ..." directory trees. While JTAlert has been coded correctly to work under those directories it wont hurt to install to a new location. If after installing to a new location the problem persists, failure when trying to open the Settings, please zip up the JTAlertSettings.exe file and email it to me directly (use my QRZ listed email address) de Laurie VK3AMA
|
|
|
|
locked
Re: AutoIT error; JTalert
Michael Black
Try real-time -- if that makes no difference than it would appear that it's not related to any processing delay. This is a known, unfixable problem with JTAlert V2 that will go away with V3....yet to be predicted when it will be released. Mike W9MDB
On Friday, July 31, 2020, 11:59:54 AM CDT, Joe Roth <joe.wc4r@...> wrote:
I set it for Above normal and there was no change :( Nice program though. Joe
|
|
|
|
locked
Re: AutoIT error; JTalert
I set it for High and WSJT-X above normal and there was no change :(
Nice program though. Joe
|
|
|
|
locked
Re: Decodes problem
Tnx Mike. I went in and deleted what was there and opened JTAlert, no problem. Whether that helped or not remains to be seen since it didn't happen all the time. Anyway I really appreciate it.
73's and stay safe, John NA6Y
|
|
|
|
locked
Re: Decodes problem
Michael Black
You need to shut down JTAlert first. And yes..you can delete all of those if they still hang around. Mike W9MDB
On Friday, July 31, 2020, 08:29:58 AM CDT, John <na6y34@...> wrote:
Mike, I see 3 "decodes. sqlite" .bak, .shm and .wal, should I delete all 3? John NA6Y
|
|
|
|
locked
Re: AutoIT error; JTalert
Michael Black
Seems like that should be OK. Just for experimentations sake try raising the priority of JTAlert and see if it makes any difference. I've been using ProcessHacker which allows things like CPU affinity and priority to be remembered for processes. Mike W9MDB
On Friday, July 31, 2020, 08:48:28 AM CDT, Joe Roth <joe.wc4r@...> wrote:
Same PC I've been using since JTAlert and WSJT-X was first offered. This docx file has all the details. https://qsl.net/wc4r/PC_info.docx
|
|
|
|
locked
Re: AutoIT error; JTalert
Same PC I've been using since JTAlert and WSJT-X was first offered. This docx file has all the details.
https://qsl.net/wc4r/PC_info.docx
|
|
|
|
locked
Re: Decodes problem
Mike, I see 3 "decodes. sqlite" .bak, .shm and .wal, should I delete all 3?
John NA6Y
|
|
|
|
locked
Re: Decodes problem
Michael Black
Type this address in your search bar -- you should see your callsign, click on it, then click on Decodes, then right-click decodes.sqlite and select Delete. %localappdata%\HamApps\JTAlert Mike W9MDB
On Friday, July 31, 2020, 07:32:18 AM CDT, John <na6y34@...> wrote:
Herb, How do I get to that address?
|
|
|
|
locked
Re: Decodes problem
Herb, How do I get to that address?
|
|
|