Date   

locked Re: No Wanted Callsign highlighting for UW5EJX/MM

HamApps Support (VK3AMA)
 

On 13/05/2020 9:41 pm, Jim Reisert AD1C wrote:
It looks like I have "Do not show Worked Before (B4) Callsigns".

I guess I can't have it both ways.
Yes you can. Most of the Alerts have a B4 override option, including the Wanted Call alert.

   

de Laurie VK3AMA


locked Re: upgrade issues

Joe
 

That should have been "...my last" (message)...sorry!


locked Re: No Wanted Callsign highlighting for UW5EJX/MM

Jim Cooper
 

On 13 May 2020 at 12:44, HamApps Support (VK3AMA)
wrote:

Also he periodically Transmits F/MM
Grid as a means of advertising his
current Grid, that is likely a more
reliable source.
except that is not UW5EJX/MM who does that ...
it is F5MYK/MM who does that (thus the F/MM) ...

a very good idea by him to tell us where he is;
need to get the UW5 op to do similar once in a while.

w2jc


locked Re: No Wanted Callsign highlighting for UW5EJX/MM

Larry Banks
 

Thanks Jim -- an award I am not familiar with.

73 -- Larry -- W1DYJ

-----Original Message-----
From: Jim Reisert AD1C
Sent: Wednesday, May 13, 2020 7:47
To: Support@hamapps.groups.io
Subject: Re: [HamApps] No Wanted Callsign highlighting for UW5EJX/MM

On Tue, May 12, 2020 at 12:38 PM Larry Banks wrote:

He/She???s Maritime Mobile ??? could be anywhere and probably doesn???t apply to any award.
Not true! They are good for the CQ DX Field Award. Many fields are
entirely in water. Working /MM stations is the only way to get them.
I have worked a few such fields from both UW5EJX/MM and F5MYK/MM.

https://www.cq-amateur-radio.com/cq_awards/cq_dx_awards/cq_dx_field_award/cq_dx_field_award.html

--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us


locked Re: No Wanted Callsign highlighting for UW5EJX/MM

Jim Reisert AD1C
 

On Tue, May 12, 2020 at 12:38 PM Larry Banks wrote:

He/She’s Maritime Mobile – could be anywhere and probably doesn’t apply to any award.
Not true! They are good for the CQ DX Field Award. Many fields are
entirely in water. Working /MM stations is the only way to get them.
I have worked a few such fields from both UW5EJX/MM and F5MYK/MM.

https://www.cq-amateur-radio.com/cq_awards/cq_dx_awards/cq_dx_field_award/cq_dx_field_award.html

--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us


locked Re: No Wanted Callsign highlighting for UW5EJX/MM

Jim Reisert AD1C
 

It also looks like "Show only Callsigns generating Alerts" does not
have priority over "Do not show Worked Before (B4) Callsigns" when
both filters are set, which I hoped would solve this problem.

On Wed, May 13, 2020 at 5:41 AM Jim Reisert AD1C <jjreisert@alum.mit.edu> wrote:

It looks like I have "Do not show Worked Before (B4) Callsigns".

I guess I can't have it both ways.

On Tue, May 12, 2020 at 8:44 PM HamApps Support (VK3AMA) via groups.io
<vk3ama.ham.apps=gmail.com@groups.io> wrote:

On 13/05/2020 3:42 am, Marion D. Kitchens wrote:

I worked him yesterday, but could find no grid square info. How do you tell where he is ?


Keep an eye on the Cluster. That is where I have seen him spotted with updated Grid information. Also he periodically Transmits F/MM Grid as a means of advertising his current Grid, that is likely a more reliable source.

de Laurie VK3AMA



--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us
--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us


locked Re: No Wanted Callsign highlighting for UW5EJX/MM

Jim Reisert AD1C
 

It looks like I have "Do not show Worked Before (B4) Callsigns".

I guess I can't have it both ways.

On Tue, May 12, 2020 at 8:44 PM HamApps Support (VK3AMA) via groups.io
<vk3ama.ham.apps=gmail.com@groups.io> wrote:

On 13/05/2020 3:42 am, Marion D. Kitchens wrote:

I worked him yesterday, but could find no grid square info. How do you tell where he is ?


Keep an eye on the Cluster. That is where I have seen him spotted with updated Grid information. Also he periodically Transmits F/MM Grid as a means of advertising his current Grid, that is likely a more reliable source.

de Laurie VK3AMA



--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us


locked Re: Possibility of eliminating some bands in "Callsign TX/Rx per band"

Alfred Reeves
 

I Agree Carlo.

Al
W1JHU


locked Re: registry problem Hamapps.Sounds

Terry N8JX
 

Thanks Laurie,
                         Yes I tried the run as administrator but still was faulting.  Thanks for the advise
            Terry


locked Possibility of eliminating some bands in "Callsign TX/Rx per band"

Carlo - IK2RPE
 

Good morning Laurie,

In JTAlert v. 2.16.5 is there the possibility of eliminating some of the bands (not interesting for me) appearing in the window  "Callsign TX/Rx per band"  ?
Thanks

Carlo  IK2RPE


locked Re: upgrade issues

Joe
 

Okay, forget my past.  I have run thru an hour of playing with this and in all but two cases (out of maybe 15) the interface is responsive in that I can turn sound on/off, open settings, etc.  In those two cases it appeared truly KIA.  In those cases, I did not have to kill the process but rather used the "X" in the upper right corner to end it.

Joe/WQ6Q


locked Re: upgrade issues

Joe
 

Non-responsive...as in restart required.  If it helps, WSJTX is not being run with administrative privilege.  Hope that helps.

Joe/WQ6Q


locked Re: JTAlert titlebar problem

Jacques F1VEV
 

soory JT 2 photo shows nornal  Cheers 


locked Re: JTAlert titlebar problem

Jacques F1VEV
 
Edited

HI just an observation which does not affect the program from working properly the title bar  goes from normal to dull , see photo JT1  and then back to normal either on its own or when window of JTAlert is clicked ??  strange  no big deal but when it goes dull I think it stopped working  which is not the case 

Thank you   Jacques F1VEV


locked Re: JTAlert 2.16.5 working with WSJT-X 2.2.0.rc1

Matt M0LMK
 

All working fine for me too with MySQL and SQLite logging.
--
Matt
M0LMK/KI5GXV


locked Re: Losing connection to 2.2.0-rc1

PA0FVH
 

Hi Laurie,

Thanks for the detailed explanation. I'll keep this in mind.
JTAlert runs smoothly with wsjt-x 2.2.0-rc1.

73 Fred PA0FVH


locked Re: upgrade issues

HamApps Support (VK3AMA)
 

On 13/05/2020 1:37 pm:
Releases 2.16.5 for me isn't so good.  It hangs regularly.  Only once have I had to restart it, but every 5-10 minutes it goes to sleep.

Environment is Flex 6600M, SmartSDR, WSJTX release candidate.  Something amiss.
OM,

When you say "hangs" do you mean the GUI becomes non-responsive or that Callsigns stop being displayed? If the later, that has been reported by a small number of users. In one case the problem was caused by running WSJT-X with elevated privileges (set to run as Administrator). Make sure your not running WSJT-X elevated.

If elevation is not the problem, then I suggest you downgrade JTAlert to 2.16.4 until further testing has been done to try and reproduce the defect after which I will make a new build for those affected to test.

de Laurie VK3AMA


locked upgrade issues

Joe
 

Releases 2.16.5 for me isn't so good.  It hangs regularly.  Only once have I had to restart it, but every 5-10 minutes it goes to sleep.

Environment is Flex 6600M, SmartSDR, WSJTX release candidate.  Something amiss.


locked Re: JTAlert titlebar problem

HamApps Support (VK3AMA)
 

On 13/05/2020 11:44 am, Katsuhisa Ishikawa wrote:
I'm using JTAlert. Suddenly the titlebar doesn't open as shown the attached (6MB cellphone image removed) and right upper box □ also doesn't work.
I tried several view setting but nothing changed.
Please advise how to resolve.
 
Thanks in advance.
de  Katz JH1WUC  

This is a known problem with no fix. The only solution is to use the "Alt Layout" build of JTAlert.

Your image (removed to to excess size) shows your running JTAlert 2.15.11. The simple fix is to use one of the "Alt Layout" JTAlert shortcuts. Alternatively, and recommended, is to upgrade JTAlert to 2.16.5 which uses the Alt Layout build of JTAlert exclusively. The old traditional layout with menus in the titlebar has been permanently retired.

de Laurie VK3AMA


locked JTAlert titlebar problem

Katsuhisa Ishikawa
 

 
Hi, 
I'm using JTAlert. Suddenly the titlebar doesn't open as shown the attached (6MB cellphone image removed) and right upper box □ also doesn't work.
I tried several view setting but nothing changed.
Please advise how to resolve.
 
Thanks in advance.
de  Katz JH1WUC  

7381 - 7400 of 36897