Date   

locked AIO Start Failure on Windows 7 Pro

km3pmpb@...
 

Hello,  I recently added a computer to the shack to use for FT8 and I can not get any of the current versions of JT Alerts to run on this computer; it is running Windows 7 Professional. I downloaded the latest version of JT Alerts (2.16.4) and got the AIO Start Failure warning; I uninstalled it and downloaded and installed an older version and am getting the same warning; also, I tried multiple times to download version 2.15.10 and my computer refused to let me download it saying it had a Trojan horse virus so that is the only version I didn’t try because I couldn’t get it downloaded. I did a search and found an old thread that gave a link to some x86 windows driver and I downloaded that but it did nothing; I’ve uninstalled, reinstalled, rebooted, and nothing has worked. I’ve run this program successfully before on other machines and I’m beyond stumped. Has anyone had this problem and how did you fix it? I use JT alerts primarily for uploading to theQRZ logbook.


~Mark KM3P
km3pmpb@...  



locked Re: WSJT-X log Start & Stop times truncated to minute

Richard McDonald
 

It did.

 

TNX

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of WB8ASI Herb
Sent: Wednesday, April 29, 2020 1:58 PM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] WSJT-X log Start & Stop times truncated to minute

 

Check the box and you should see the seconds in your log.  Hope it works for you.

On April 29, 2020 at 4:45 PM "Richard McDonald via groups.io" <ranchoham@...> wrote:

Hi Herb,

 

That option is not checked.

 

 

73,

Rich

WB0NRE

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of WB8ASI Herb
Sent: Wednesday, April 29, 2020 11:49 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] WSJT-X log Start & Stop times truncated to minute

 

On April 29, 2020 at 1:15 PM "Richard McDonald via groups.io" <ranchoham@...> wrote:

Software versions:
WSJT-X   v2.1.2
JTAlert for WSJT-X    2.16.4
HRD LOG    6.7.0.275

Since loading JTAlert, my logbook entries from WSJT-X have their start and stop time seconds entry truncated to zero.

Is JTAlert doing this?  Is there a way to stop it?

Rich
WB0NRE


 

 

 

Attachments:


 


locked Re: V 2.16.4 not filling in NAME,QTH, or GRID info.

Richard McDonald
 

Right Click on the network icon in your task tray

Select “Open Network & Internet Settings”

Click on “Change connection properties”

Click on “Private” and close the settings window.

 

Cheers,

Rich

WB0NRE

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of k6vib@q.com
Sent: Wednesday, April 29, 2020 11:31 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] V 2.16.4 not filling in NAME,QTH, or GRID info.

 

TNX John. Now where is that pub/priv found? I have seen it but not sure where. Bob K6viB


locked Re: WSJT-X log Start & Stop times truncated to minute

WB8ASI Herb
 

Check the box and you should see the seconds in your log.  Hope it works for you.

On April 29, 2020 at 4:45 PM "Richard McDonald via groups.io" <ranchoham@...> wrote:

Hi Herb,

 

That option is not checked.

 

 

73,

Rich

WB0NRE

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of WB8ASI Herb
Sent: Wednesday, April 29, 2020 11:49 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] WSJT-X log Start & Stop times truncated to minute

 

On April 29, 2020 at 1:15 PM "Richard McDonald via groups.io" <ranchoham@...> wrote:

Software versions:
WSJT-X   v2.1.2
JTAlert for WSJT-X    2.16.4
HRD LOG    6.7.0.275

Since loading JTAlert, my logbook entries from WSJT-X have their start and stop time seconds entry truncated to zero.

Is JTAlert doing this?  Is there a way to stop it?

Rich
WB0NRE


 

 


Attachments:


 


locked Re: WSJT-X log Start & Stop times truncated to minute

Michael Black
 

If you want seconds you have to check it.

de Mike W9MDB




On Wednesday, April 29, 2020, 03:45:56 PM CDT, Richard McDonald via groups.io <ranchoham@...> wrote:


Hi Herb,

 

That option is not checked.

 

 

73,

Rich

WB0NRE

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of WB8ASI Herb
Sent: Wednesday, April 29, 2020 11:49 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] WSJT-X log Start & Stop times truncated to minute

 

On April 29, 2020 at 1:15 PM "Richard McDonald via groups.io" <ranchoham@...> wrote:

Software versions:
WSJT-X   v2.1.2
JTAlert for WSJT-X    2.16.4
HRD LOG    6.7.0.275

Since loading JTAlert, my logbook entries from WSJT-X have their start and stop time seconds entry truncated to zero.

Is JTAlert doing this?  Is there a way to stop it?

Rich
WB0NRE


 


locked Re: WSJT-X log Start & Stop times truncated to minute

g4wjs
 

On 29/04/2020 21:45, Richard McDonald via groups.io wrote:

Hi Herb,

 

That option is not checked.

Richard,

that is exactly why your QSO start and end times are being adjusted to whole minutes.


--
73
Bill
G4WJS.


locked Re: WSJT-X log Start & Stop times truncated to minute

Richard McDonald
 

Oops, ignore my last message; I read the option wrong.  I’ll set it and try again.

 

73,

Rich

WB0NRE

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of WB8ASI Herb
Sent: Wednesday, April 29, 2020 11:49 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] WSJT-X log Start & Stop times truncated to minute

 

On April 29, 2020 at 1:15 PM "Richard McDonald via groups.io" <ranchoham@...> wrote:

Software versions:
WSJT-X   v2.1.2
JTAlert for WSJT-X    2.16.4
HRD LOG    6.7.0.275

Since loading JTAlert, my logbook entries from WSJT-X have their start and stop time seconds entry truncated to zero.

Is JTAlert doing this?  Is there a way to stop it?

Rich
WB0NRE


 


locked Re: WSJT-X log Start & Stop times truncated to minute

Richard McDonald
 

Hi Herb,

 

That option is not checked.

 

 

73,

Rich

WB0NRE

 

From: Support@HamApps.groups.io <Support@HamApps.groups.io> On Behalf Of WB8ASI Herb
Sent: Wednesday, April 29, 2020 11:49 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] WSJT-X log Start & Stop times truncated to minute

 

On April 29, 2020 at 1:15 PM "Richard McDonald via groups.io" <ranchoham@...> wrote:

Software versions:
WSJT-X   v2.1.2
JTAlert for WSJT-X    2.16.4
HRD LOG    6.7.0.275

Since loading JTAlert, my logbook entries from WSJT-X have their start and stop time seconds entry truncated to zero.

Is JTAlert doing this?  Is there a way to stop it?

Rich
WB0NRE


 


locked HamApps Callsign Database v2020.04.29

Jim AF5FH
 

I see that there is a new Callsign database update on HamApps.com today (4/29/2020). 

Just curious, since Laurie posted on 4/24/2020 that VK3AMA will be offline for 2 to 3 weeks, and during this time JTAlert and Callsign database updates will be suspended.

73,
Jim AF5FH


locked Re: WSJT-X log Start & Stop times truncated to minute

WB8ASI Herb
 


On April 29, 2020 at 1:15 PM "Richard McDonald via groups.io" <ranchoham@...> wrote:

Software versions:
WSJT-X   v2.1.2
JTAlert for WSJT-X    2.16.4
HRD LOG    6.7.0.275

Since loading JTAlert, my logbook entries from WSJT-X have their start and stop time seconds entry truncated to zero.

Is JTAlert doing this?  Is there a way to stop it?

Rich
WB0NRE

 


locked Re: V 2.16.4 not filling in NAME,QTH, or GRID info.

WB8ASI Herb
 

It's in you wifi connection properties.  Just found that mine has switched to Public also, but not having problems.  Put it back to Private anyways.  73 Herb WB8ASI

On April 29, 2020 at 2:30 PM "k6vib@q.com" <k6vib@q.com> wrote:

TNX John. Now where is that pub/priv found? I have seen it but not sure where. Bob K6viB

 


locked WSJT-X log Start & Stop times truncated to minute

Richard McDonald
 

Software versions:
WSJT-X   v2.1.2
JTAlert for WSJT-X    2.16.4
HRD LOG    6.7.0.275

Since loading JTAlert, my logbook entries from WSJT-X have their start and stop time seconds entry truncated to zero.

Is JTAlert doing this?  Is there a way to stop it?

Rich
WB0NRE


locked Re: V 2.16.4 not filling in NAME,QTH, or GRID info.

k6vib@q.com
 

TNX John. Now where is that pub/priv found? I have seen it but not sure where. Bob K6viB


locked Re: V 2.16.4 not filling in NAME,QTH, or GRID info.

John Kludt K7SYS
 

K6VIB,

I don't know how this works but I started having problems with number of apps after the last Win10 update.  It turned out that I am not sure how but the network had been flipped to "Public" from "Private."  When Is set things back to "Private" things started working again.

John

On Wed, Apr 29, 2020 at 2:07 PM k6vib@q.com <k6vib@q.com> wrote:
Using WSJT-X newest version. my JTAlert 2.16.4 is missing info even after uninstall/reinstall. See Subject line. Tried the ALT program and got the same thing. Any help? SENT 4-29-2020


locked Re: Decodes Window Will Not Open (Windows 10)

Marlo Montanaro - KA2IRQ
 

In both cases, I have found if the Decodes window is blank, opening the Statistics window (from the Decodes menu) will populate everything within a few seconds and processing will continue from that point.  You can then close the Statistics window.

Not sure why that is or if it is specific to my configuration, so, your mileage may vary.

 

73,

Marlo- KA2IRQ


locked Re: Decodes Window Will Not Open (Windows 10)

TomK
 
Edited

Thanks for update Tom.  I hope it's a good time off for him.
No rush for me. I'm all set for the moment.
TomK 73


locked Re: Decodes Window Will Not Open (Windows 10)

Tom Melvin
 

Laurie is ‘off the grid’ for a few weeks with no internet access.

I don’t believe there is anyone on this list that can answer those queries.

I’m sure he will reply when back so don’t be concerned with no response.

Tom

--
73’s

Tom
GM8MJV (IO85)

On 28 Apr 2020, at 23:01, TomK <QSO@KT1TK.com> wrote:

[Edited Message Follows]

I could have added a preamble that explained there were 2 Decodes display issues in this thread.
1. Decodes window initially opens w/o message traffic but starts after Decode window is close/reopened.
2. Decodes window opens but never displays traffic no matter how many Decode window or JT Alert restarts.

If yours is Case #1 then, I agree, it is a minor annoyance that may not be worth deleting/rebuilding your config.
My message was already as tedious as I was tired so I neglected to apply my usual 7th reread/edit :-)

I was commenting on Case #2 wherein the Decodes window never displays traffic regardless of actions.
As I hopefully explained, it seems related to the JT Alert & Decodes processes losing communication.
I surmised that deleting the config data might allow a re-install to re-sync JT main & decodes processes.
My pondering thus focused on how to completely uninstall JT Alert and all of its its configuration data.
Alas, that method also entails the loss of all previously customized user settings
There should be easier ways but I have not found/read the details of the lower level architecture.
I'll research that further - It's probably a simple thing that I have not yet come upon.

[Update]
I've since found a trick method to retain most (not all) user config data. What I did was to
copy back the SQLIte config DB file from a previous install to the current install's folder.
That resurrected most (not all) config settings while not undoing the re-synced communication.
Unfortunately, it did not resurrect my elaborate list of macros. They may be in another file.
Also think UDP port is in another file so it was not messed up by my SQLite DB restoration.

Laurie and Assoc:
Are there any accessible data on JT-Alert's disk and I/O architecture?
E.g., Outward I/O port operations + internal comms w/Decodes module.
Also descriptions of the purpose, format and location of all config data files.
It would greatly assist in debugging and fixing issues w//o taxing your time.
The initial goals being to figure out how to reset JT-Alert & JT-Decode comms
and to better archive and restore ancillary data like settings, Macros, etc.
There's just too much stuff in Local data folder to properly reverse engineer.
I could start a system utilities package listing basic lower level operations.

TomK 73


locked Re: Decodes Window Will Not Open (Windows 10)

TomK
 
Edited

I could have added a preamble that explained there were 2 Decodes display issues in this thread.
1. Decodes window initially opens w/o message traffic but starts after Decode window is close/reopened.
2. Decodes window opens but never displays traffic no matter how many Decode window or JT Alert restarts.

If yours is Case #1 then, I agree, it is a minor annoyance that may not be worth deleting/rebuilding your config.
My message was already as tedious as I was tired so I neglected to apply my usual 7th reread/edit :-)

I was commenting on Case #2 wherein the Decodes window never displays traffic regardless of actions.
As I hopefully explained, it seems related to the JT Alert & Decodes processes losing communication.
I surmised that deleting the config data might allow a re-install to re-sync JT main & decodes processes.
My pondering thus focused on how to completely uninstall JT Alert and all of its its configuration data.
Alas, that method also entails the loss of all previously customized user settings
There should be easier ways but I have not found/read the details of the lower level architecture.
I'll research that further - It's probably a simple thing that I have not yet come upon.

[Update]
I've since found a trick method to retain most (not all) user config data. What I did was to
copy back the SQLIte config DB file from a previous install to the current install's folder.
That resurrected most (not all) config settings while not undoing the re-synced communication.
Unfortunately, it did not resurrect my elaborate list of macros. They may be in another file.
Also think UDP port is in another file so it was not messed up by my SQLite DB restoration.

Laurie and Assoc:
Are there any accessible data on JT-Alert's disk and I/O architecture?
E.g., Outward I/O port operations + internal comms w/Decodes module.
Also descriptions of the purpose, format and location of all config data files.
It would greatly assist in debugging and fixing issues w//o taxing your time.
The initial goals being to figure out how to reset JT-Alert & JT-Decode comms
and to better archive and restore ancillary data like settings, Macros, etc.
There's just too much stuff in Local data folder to properly reverse engineer.
I could start a system utilities package listing basic lower level operations.

TomK 73


locked Re: call change

Michael Black
 

If you're on Windows 10 go to your search bar and type "Change station".

JTAlert must not be running when you do it.

Otherwise it's in the HamApps program menu.

de Mike W9MDB




On Tuesday, April 28, 2020, 05:50:57 AM CDT, robert spit <pd0pvl@...> wrote:


hi,

 

I changes my call today from pd0pvl to PD2V.

 

Can you support this change?

 

Thanks

 

Robert

 

PD2V

 

 

Verzonden vanuit Mail voor Windows 10

 


Virusvrij. www.avg.com


locked Re: Decodes Window Will Not Open (Windows 10)

Dev Null
 

Why would I want to spend hours doing an uninstall/reinstall/reconfigure, when all I need to do (for now) is hit "x" to close the decode window, hit "view" on the main window, and select "decodes window" again? That is what I have been doing for weeks, and I can live with that until the next release.

8061 - 8080 of 37312