Date   

locked Re: Error Message JTAlert 2.15.8

HamApps Support (VK3AMA)
 

On 31/01/2020 12:58 am, Paul Scarratt via Groups.Io wrote:
Running Win10 and WSJT v2.1.2.

Installed the new version of JTAlert on his new PC and got this error message. MySQL error, every time I tried to go into Settings/Manage Settings, is there a fix available please?

Regards Paul G0WRE.

Known problem affecting a small number of users. It is fixed in the next public release of JTAlert.

I have sent you a link to a pre-release build to test.

de Laurie VK3AMA


locked Re: JTALERT XP

HamApps Support (VK3AMA)
 

On 31/01/2020 3:13 am, lozere15@... wrote:
I search JTALERT and WSJT-X for windows XP
thank you
73 friend

The last version of JTAlert that supported Win XP is 2.11.5, released June 2018.
It is available for download at https://HamApps.com/JTAlert/
near the bottom of the page.

de Laurie VK3AMA
   


locked Re: Turning off (Copy to Clipboard)

HamApps Support (VK3AMA)
 

On 31/01/2020 5:39 am, Mike Steiner wrote:

Maybe I’m missing it but is there a way to turn off where the callsign is automatically copied to clip board. It seems like this wants there a few versions back.

 

Thanks

Mike K7QDX

"Window" section of the Settings GUI. Look for the "Callsign click places Callsign text onto clipboard" checkbox.

de Laurie VK3AMA


locked JTALERT XP

lozere15@...
 

Hello
I search JTALERT and WSJT-X for windows XP
thank you
73 friend


locked Error Message JTAlert 2.15.8

Paul Scarratt
 

Hi All,

Running Win10 and WSJT v2.1.2.

Installed the new version of JTAlert on his new PC and got this error message. MySQL error, every time I tried to go into Settings/Manage Settings, is there a fix available please?

Regards Paul G0WRE.



locked FT4 calls not shown in JTAlert

Wojciech Tomczyk
 

I just installed JTDX rc 147. In FT8 mode everything works fine, JTAlert shows decoded calls. However, in FT4 mode no calls are displayed in JTAlert.
Any suggestions how to solve this problem?

Tom, SP7WT


locked Turning off (Copy to Clipboard)

Mike Steiner
 

Maybe I’m missing it but is there a way to turn off where the callsign is automatically copied to clip board. It seems like this wants there a few versions back.

 

Thanks

Mike K7QDX


locked Re: Call sign database downloads

Joseph Hurd
 

Bill,

You're correct, the link is at the bottom of the page, I missed it, thanks. I downloaded the update and installed it.

Note that my license was updated with the FCC database on 3-9-2019. I think that would be enough time to get thru the system. :)


locked Re: Call sign database downloads

g4wjs
 
Edited

On 30/01/2020 17:49, Joseph Hurd wrote:
My call is being reported as SC in JTAlert. This was true until about a year ago. As I under stand i, the data for look ups if pulled from FCC records. I have updated my address in the FFC records and just checked the ULS - it is correct as a NC address. I do not see a database download on the HamApps webpage, just ones for the program itself and the sound files. Searching google, I found this link, but it is on somebody's blog and I don't trust it:

https://dnl.hamapps.com/Databases/HamApps.Databases.2020.01.24.Setup.exe

Where do I go to download a JTAlert call sign database update?

this issue existed with the last current version.

Hi Joseph,

that's the correct file. Why would you doubt a link that is within the hamapps.com domain? The link is also right there on the home page http://hamapps.com/, scroll down to "Support File Downloads". It may take a while for your address change with the FCC to filter through to Laurie's callsign database as I am sure there are few steps involved.


--
73
Bill
G4WJS.


locked Call sign database downloads

Joseph Hurd
 
Edited

My call is being reported as SC in JTAlert. This was true until about a year ago. As I under stand i, the data for look ups if pulled from FCC records. I have updated my address in the FFC records and just checked the ULS - it is correct as a NC address. I do not see a database download on the HamApps webpage, just ones for the program itself and the sound files. Searching google, I found this link, but it is on somebody's blog and I don't trust it:

https://dnl.hamapps.com/Databases/HamApps.Databases.2020.01.24.Setup.exe

Where do I go to download a JTAlert call sign database update?

this issue existed with the last current version.


locked Re: Issue with 2.15.8 and settings

Michael Black
 

Are you perhaps running Webroot?
If so use JTAlert_AL.exe instead.

de Mike W9MDB




On Thursday, January 30, 2020, 10:06:41 AM CST, Raymond Kasprzak <raykasprzak@...> wrote:


Also have a problem with 2.15.8.
Jt alert keeps displaying waiting for WSJTX to start even though WSJTX has started and  is running. This is not a Windows 10 problem.. Went back to 2.15.7 which works fine.


locked Re: Issue with 2.15.8 and settings

Raymond Kasprzak
 

Also have a problem with 2.15.8.
Jt alert keeps displaying waiting for WSJTX to start even though WSJTX has started and  is running. This is not a Windows 10 problem.. Went back to 2.15.7 which works fine.


locked Re: Issue with 2.15.8 and settings

g4wjs
 

On 30/01/2020 10:45, Joseph Hurd wrote:
Bill,

Understood. Just checked my PC, both x86 & x64 MS VC++ 2015 Redistributable are installed.
Joseph,

that means either your MSVC++ 2015 redistributable component is corrupt (unlikely), or you are suffering a different issue than the one discussed recently here: https://hamapps.groups.io/g/Support/topic/can_t_get_to_jtaler_manage/70137039?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,70137039

You could try reinstalling the redistributable component: https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads



--
73
Bill
G4WJS.


locked Re: Issue with 2.15.8 and settings

Joseph Hurd
 

Bill,

Understood. Just checked my PC, both x86 & x64 MS VC++ 2015 Redistributable are installed.


locked Re: Issue with 2.15.8 and settings

g4wjs
 

On 30/01/2020 10:28, Joseph Hurd wrote:
Hi Bill,

Did you mean to say the 64 bit [x64] version?
Joseph,

no, I meant what I typed.



--
73
Bill
G4WJS.


locked Re: Issue with 2.15.8 and settings

Joseph Hurd
 

Hi Bill,

Did you mean to say the 64 bit [x64] version?


locked Re: Issue with 2.15.8 and settings

g4wjs
 

On 30/01/2020 09:52, Joseph Hurd wrote:
This is apparently related to MS C++. My PC has many version of Visual C++ from 2015 [current] back to 2005, as different apps need different versions [some older] to run.
Hi Joseph,

you need to install the MS VC++ 2015 Redistributable 32-bit version.



--
73
Bill
G4WJS.


locked Issue with 2.15.8 and settings

Joseph Hurd
 

W7 Home x64 PC: I just updated JTAlert to v. 2.15.8. Decodes and alerts were ok, but when trying to open either settings, view or alerts, I get the error that:
API-MS-Win-CRT-Runtime-L1-1-0 DLL
is missing.

This is apparently related to MS C++. My PC has many version of Visual C++ from 2015 [current] back to 2005, as different apps need different versions [some older] to run. A google search revealed that the first suggestion for a missing API-MS-Win-CRT-Runtime-L1-1-0 DLL was to run "repair" on the latest version of C++. This did not resolve my issue.

My solution was to uninstall JTAlert v. 2.15.8 and then to re-install v.2-15-7. This resolved the issue.
I am not sure if this is a Windows issue or a JTAlert issue but thought it may be of help to others.

Note: Just to be sure, I suggest that you save your current configuration settings for JTAlert before uninstalling it.


locked Re: WSJT-X UDP -- piggyback messages to WSJT-X

Erik Icket
 

Thank you Bill, once more, for your thorough insights.

For the moment, I have something working for a single WSJTX instance along the limitations which you described earlier.

Let's see how JTalert or AutoIT evolves with respect to multicasting.

Thanks again and 73's,
Erik
ON4PB


locked Text Messaging #TIP

B. Smith
 

I wrote a simple .bat file that makes using the Text Messaging feature a little easier by invoking NotePad. I put some 73 types of messages that I commonly might want to send in the file and can cut-and-paste them,  rather than typing them out when using text messaging. I placed the .bat file in "Applications > Auto-start" area of JTAlert. Example of a path into Auto Start:  C:\Users\Bill\JTAlert.txt.bat
Bat file: @echo off
             Start D:\Documents\JTAlert.txt
I saved the text file as follows: C:\Users\Bill\JTAlert.txt.bat
Nice feature is that the file is editable, as you think of things and refine it - just "save" the edit.
It won't close out automatically, like real apps will in Auto-start - but it's just one mouse click to resolve.
73, Bill n3xl