Date   

locked Is this a false positive?

chris g7ogx
 

Hello all, what great software we have thank you.  While trying to load the latest version 2.13.8 over 2.13.7 I received the above Virus warning from AVG.  73 Chris G7OGX


locked Re: Multiple HRD Log Entries #HRD

Michael Black
 

If you're not running N1MM turn that off.




On Thursday, June 20, 2019, 12:35:06 PM CDT, Tom Crites <crites57@...> wrote:


WSJT-X File/Settings/Reporting - has no "Secondary UDP Server" setting.  Under Logging, Propte me to log QSO and Clear DX call and grid after logging is checked.  Network Service 'Enable PSK Reporter spotting' is checked.  Under UDP Server, Accept UDP requests is checkedn.  And under N1MM Logger + Broadcasts, Enable logged contact ADIF broadcast is checked.

JTAlert - Rebroadcast SWJT-X UDP packets is NOT checked.

de Tom KC8SES


locked Re: Multiple HRD Log Entries #HRD

Tom Crites
 

WSJT-X File/Settings/Reporting - has no "Secondary UDP Server" setting.  Under Logging, Propte me to log QSO and Clear DX call and grid after logging is checked.  Network Service 'Enable PSK Reporter spotting' is checked.  Under UDP Server, Accept UDP requests is checkedn.  And under N1MM Logger + Broadcasts, Enable logged contact ADIF broadcast is checked.

JTAlert - Rebroadcast SWJT-X UDP packets is NOT checked.

de Tom KC8SES


locked Re: Multiple HRD Log Entries #HRD

Michael Black
 

Check WSJT-X File/Settings/Reporting -- do you have the "Secondary UDP Server" turned on?
Then check JTAlert Settings/Applications/WSJT-X -- do you have the "Rebroadcast WSJT-X UDP packets" turned on?

de MIke W9MDB




On Thursday, June 20, 2019, 11:40:06 AM CDT, Tom Crites <crites57@...> wrote:


I just installed JTAlertX (v2.13.8) per a Youtube from AE4VJ (https://www.youtube.com/watch?v=QTWlFsxdEVU).  This is a very cool program! 

I'm sure this is some type of configuration issue but I am getting 3 Ham Radio Deluxe logbook entries every time I log a contact with WSJJT-X (v2.0.1).  I'm running HRD logbook version 6.5.0.207.


locked Re: JTAlert Settings window will not appear

Michael Black
 

Right-click the task bar and select "Cascade windows".

Hopefully it will appear...probably off screen for some reason.

de Mike W9MDB








On Thursday, June 20, 2019, 11:40:09 AM CDT, Mark via Groups.Io <m.weiss@...> wrote:


I installed JTAlert 2.13.8.  WSJT-X and JTAlert seem to work properly, but can’t get the JTAlert Settings window to display.  I had the same problem with earlier JTAlert versions in this Windows 10 machine.

 

When I launch settings, the taskbar shows the Red “X” with a blue star a little to the left and below the icon’s center.  When I run the cursor over that icon, I see a small image of the settings window.  I also see the window when I alt-tab to that image.

 

But I can’t get the settings window to appear on the monitor to enable me to change the settings.

 

What do you suggest is the problem and the fix?

 

Tnx & 73,

 

Mark, K6FG


locked JTAlert Settings window will not appear

Mark
 

I installed JTAlert 2.13.8.  WSJT-X and JTAlert seem to work properly, but can’t get the JTAlert Settings window to display.  I had the same problem with earlier JTAlert versions in this Windows 10 machine.

 

When I launch settings, the taskbar shows the Red “X” with a blue star a little to the left and below the icon’s center.  When I run the cursor over that icon, I see a small image of the settings window.  I also see the window when I alt-tab to that image.

 

But I can’t get the settings window to appear on the monitor to enable me to change the settings.

 

What do you suggest is the problem and the fix?

 

Tnx & 73,

 

Mark, K6FG


locked Multiple HRD Log Entries #HRD

Tom Crites
 

I just installed JTAlertX (v2.13.8) per a Youtube from AE4VJ (https://www.youtube.com/watch?v=QTWlFsxdEVU).  This is a very cool program! 

I'm sure this is some type of configuration issue but I am getting 3 Ham Radio Deluxe logbook entries every time I log a contact with WSJJT-X (v2.0.1).  I'm running HRD logbook version 6.5.0.207.


locked Re: Help

 

The original problem was fixed by turning the computer, radio, and SignaLink off the restarting the computer, When it was fully booted, I started the radio then the Signalink. That caused the card to be recognized pr4operfly. The second problem I had was caused by no logging program, and some configuration.

-----Original Message-----
From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of John
Sent: Thursday, June 20, 2019 8:28 AM
To: support
Subject: Re: [HamApps] Help

Hi Dave,

What fixed your problem?

John

---------- Original Message ----------
From: Dave Alexander <dave.alexander1947@gmail.com>
Date: June 20, 2019 at 5:30 AM


Got it fixed. By the way I have the version of Win 10 that does not require
that. It has the better clock in it.



From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf
Of HamApps Support (VK3AMA)
Sent: Wednesday, June 19, 2019 10:14 PM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help



On 20/06/2019 2:08 am, Dave Alexander wrote:

I am running windows 10 with a SignaLink usb. All is fine with FLDig but I
am not receiving anything with WSJT-X.
I do have activity on the wsjt-x waterfall. I need some suggestions.
Thanks for the help.

73'2
Dave
KA3PMW

If your seeing activity on the Waterfall, but not getting any Decodes, the
most likely cause in your PC clock not is not accurate.
What time sync software are you using and how often is it syncing your
clock>

de Laurie VK3AMA






locked Re: JTAlert to N3FJP on Networked Computer

Robert Teuma-Castelletti
 
Edited

On Wed, Jun 19, 2019 at 02:06 PM, techpubsman wrote:
N3FJP Field Day logger for field day. We have five operating positions each with a laptop that network connects to a master laptop where the actual logging file exists. For the last few days I have set up the laptops in the network configuration we will be using this weekend and tried to get JTALert to play nicely with N3FJP FD Logging software. Read the tutorial and Looked at a lot of YouTube videos on the subject. Running the latest WSJT-X, JTAlert and FD Logging software versions. Just can not get them to work together. When I click on the TCP checkbox, the software indicates the software on that laptop is a client and you must connect to our master laptop which I have done. There is no interaction between JTALert and N3FJP.
Randy,

These are my settings on the client (non-server) computer. You must check with the person running the "master" (server) laptop for what settings you should use in image 3. (I'd recommend TCP if you are running it.) Note that in image 1 the "Log file" does not matter at all. I am assuming you have a connection between JTAlert and WSJT-X already.

-Rob


locked Re: Autolt Error

Rich McCabe
 

What is odd is slicemaster only configures WSJT. Has nothing to do with JTalert. 


locked Re: #HRD #HRD

Frank Kirschner
 

Aha! That may have been the problem. I thought I had the firewall and anti-virus programs under control, but maybe not.

73,
Frank
KF6E

On Wed, Jun 19, 2019 at 11:37 PM Dave AA6YQ <aa6yq@...> wrote:

+ Configure your firewall and anti-malware applications to consider each DXLab application to be "safe".

       73,

              Dave, AA6YQ





locked Re: Help

Michael Black
 

There's been some change in the 1903 update. 
Microsoft had said quite a while ago that they intended to improve time sync.
So after every update I disable Meinberg and see what happens.

After the 1903 update I noticed w32tm was not running (it was in Triggered startup mode).  It's possible my messing with things had this hosed...not sure.
So running any w32tm would fail.  A reboot didn't start the time service either.
There is a new "Sync now" button in the Date & time settings which I could click and seemed to work...but the update frequency was horrible of course.

I made the changes in the link Bill provided but had to change w32time to "Automatic" start.  Once I did that the "Sync now" button is grayed out so it knows that w32tm is running and time was getting synced every 64 seconds to ntp.pool.org.  If I stop the w32tm service the button is enabled again but is not resyncing on it's own (apparently). 

So I'm not sure if MS has disabled w32tm now but having users modify the registry is pretty useless.  I wonder if they'll put a "high accuracy" button in them time setting....probably not if I had to guess.  

de Mike W9MDB






On Thursday, June 20, 2019, 06:37:13 AM CDT, g4wjs <bill.8@...> wrote:


Hi Dave,

so those are the NTP minimum and maximum poll intervals measured in log2 seconds.

10 means 2^10 seconds = 1024 ~= 17 minutes
15 means 2^15 seconds = 32768 ~= 9 hours

So as I said, unless you have adjusted W32Time service registry alues for high accuracy as recommended by Microsoft here https://docs.microsoft.com/en-us/windows-server/networking/windows-time-service/configuring-systems-for-high-accuracy?tabs=MinPollInterval (the Registry settings are at the bottom) you are potentially not getting time updates more frequently than once every 9 hours or so. Most motherboard real time clock chips cannot maintain sufficient clock accuracy for WSJT-X modes without corrections more frequently than that, particularly when the machine is powered down. Microsoft do not really want Windows Desktop users obtaining high accuracy UTC synchronization from their NTP time server network as the load would jeopardize the accuracy obtainable to their business users, hence the low accuracy default settings which are more than sufficient for the average Windows Desktop user and keep the MS NTP server's load to an acceptable level (i.e. MS don't have to invest more in a bigger global pool of NTP servers).

73
Bill
G4WJS.

On 20/06/2019 12:24, Dave Alexander wrote:

Mini  pole is 10 (0x0ah)

Max is 15 (0x0fh)

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of g4wjs
Sent: Thursday, June 20, 2019 7:17 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help

 

Hi Dave,

 

what instructions are you referring to?

 

What are the values of the following two Windows Registry keys?

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\MinPollInterval
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\MaxPollInterval

 

On 20/06/2019 12:12, Dave Alexander wrote:

I run a pre release version. The instructions for JTAlert and WSJT-X tell you if you have the version I have there is no need to run another time sync program.

 

I am running windows 10 home insider preview evaluation copy build 18917.rs_prerelease,19607-1942

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of g4wjs
Sent: Thursday, June 20, 2019 6:52 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help

 

On 20/06/2019 11:30, Dave Alexander wrote:

By the way I have the version of Win 10 that does not require that. It has the better clock in it.

Hi Dave,

there is no such version of Windows. The Windows Internet Time sync has been unchanged for several versions, all that has changed are that the instructions for increasing the accuracy that only used to only be in the Windows Server documentation are now listed for the Desktop versions. Unless you have changed the relevant registry settings to increase the time accuracy you are still potentially only getting a time correction every 9 hours (2^15 seconds).

IMHO the best way to maintain accurate synchronization to UTC on Windows is to install a 3rd party tool like the Meinberg NTP Client and configure it correctly.



--
73
Bill
G4WJS.


locked Re: Help

John
 

Hi Dave,

What fixed your problem?

John

---------- Original Message ----------
From: Dave Alexander <dave.alexander1947@gmail.com>
Date: June 20, 2019 at 5:30 AM


Got it fixed. By the way I have the version of Win 10 that does not require
that. It has the better clock in it.



From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf
Of HamApps Support (VK3AMA)
Sent: Wednesday, June 19, 2019 10:14 PM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help



On 20/06/2019 2:08 am, Dave Alexander wrote:

I am running windows 10 with a SignaLink usb. All is fine with FLDig but I
am not receiving anything with WSJT-X.
I do have activity on the wsjt-x waterfall. I need some suggestions.
Thanks for the help.

73'2
Dave
KA3PMW

If your seeing activity on the Waterfall, but not getting any Decodes, the
most likely cause in your PC clock not is not accurate.
What time sync software are you using and how often is it syncing your
clock>

de Laurie VK3AMA






locked Re: Help

g4wjs
 

Hi Dave,

so those are the NTP minimum and maximum poll intervals measured in log2 seconds.

10 means 2^10 seconds = 1024 ~= 17 minutes
15 means 2^15 seconds = 32768 ~= 9 hours

So as I said, unless you have adjusted W32Time service registry values for high accuracy as recommended by Microsoft here https://docs.microsoft.com/en-us/windows-server/networking/windows-time-service/configuring-systems-for-high-accuracy?tabs=MinPollInterval (the Registry settings are at the bottom) you are potentially not getting time updates more frequently than once every 9 hours or so. Most motherboard real time clock chips cannot maintain sufficient clock accuracy for WSJT-X modes without corrections more frequently than that, particularly when the machine is powered down. Microsoft do not really want Windows Desktop users obtaining high accuracy UTC synchronization from their NTP time server network as the load would jeopardize the accuracy obtainable to their business users, hence the low accuracy default settings which are more than sufficient for the average Windows Desktop user and keep the MS NTP server's load to an acceptable level (i.e. MS don't have to invest more in a bigger global pool of NTP servers).

73
Bill
G4WJS.

On 20/06/2019 12:24, Dave Alexander wrote:

Mini  pole is 10 (0x0ah)

Max is 15 (0x0fh)

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of g4wjs
Sent: Thursday, June 20, 2019 7:17 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help

 

Hi Dave,

 

what instructions are you referring to?

 

What are the values of the following two Windows Registry keys?

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\MinPollInterval
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\MaxPollInterval

 

On 20/06/2019 12:12, Dave Alexander wrote:

I run a pre release version. The instructions for JTAlert and WSJT-X tell you if you have the version I have there is no need to run another time sync program.

 

I am running windows 10 home insider preview evaluation copy build 18917.rs_prerelease,19607-1942

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of g4wjs
Sent: Thursday, June 20, 2019 6:52 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help

 

On 20/06/2019 11:30, Dave Alexander wrote:

By the way I have the version of Win 10 that does not require that. It has the better clock in it.

Hi Dave,

there is no such version of Windows. The Windows Internet Time sync has been unchanged for several versions, all that has changed are that the instructions for increasing the accuracy that only used to only be in the Windows Server documentation are now listed for the Desktop versions. Unless you have changed the relevant registry settings to increase the time accuracy you are still potentially only getting a time correction every 9 hours (2^15 seconds).

IMHO the best way to maintain accurate synchronization to UTC on Windows is to install a 3rd party tool like the Meinberg NTP Client and configure it correctly.



--
73
Bill
G4WJS.


locked Re: Help

 

I got a notice a few days ago that the time sync was hot heeded with this version of Windows.

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of Dave Alexander via Groups.Io
Sent: Thursday, June 20, 2019 7:25 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help

 

Mini  pole is 10 (0x0ah)

Max is 15 (0x0fh)

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of g4wjs
Sent: Thursday, June 20, 2019 7:17 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help

 

Hi Dave,

 

what instructions are you referring to?

 

What are the values of the following two Windows Registry keys?

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\MinPollInterval
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\MaxPollInterval

 

On 20/06/2019 12:12, Dave Alexander wrote:

I run a pre release version. The instructions for JTAlert and WSJT-X tell you if you have the version I have there is no need to run another time sync program.

 

I am running windows 10 home insider preview evaluation copy build 18917.rs_prerelease,19607-1942

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of g4wjs
Sent: Thursday, June 20, 2019 6:52 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help

 

On 20/06/2019 11:30, Dave Alexander wrote:

By the way I have the version of Win 10 that does not require that. It has the better clock in it.

Hi Dave,

there is no such version of Windows. The Windows Internet Time sync has been unchanged for several versions, all that has changed are that the instructions for increasing the accuracy that only used to only be in the Windows Server documentation are now listed for the Desktop versions. Unless you have changed the relevant registry settings to increase the time accuracy you are still potentially only getting a time correction every 9 hours (2^15 seconds).

IMHO the best way to maintain accurate synchronization to UTC on Windows is to install a 3rd party tool like the Meinberg NTP Client and configure it correctly.


--
73
Bill
G4WJS.

 


--
73
Bill
G4WJS.


locked Re: Help

 

Mini  pole is 10 (0x0ah)

Max is 15 (0x0fh)

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of g4wjs
Sent: Thursday, June 20, 2019 7:17 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help

 

Hi Dave,

 

what instructions are you referring to?

 

What are the values of the following two Windows Registry keys?

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\MinPollInterval
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\MaxPollInterval

 

On 20/06/2019 12:12, Dave Alexander wrote:

I run a pre release version. The instructions for JTAlert and WSJT-X tell you if you have the version I have there is no need to run another time sync program.

 

I am running windows 10 home insider preview evaluation copy build 18917.rs_prerelease,19607-1942

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of g4wjs
Sent: Thursday, June 20, 2019 6:52 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help

 

On 20/06/2019 11:30, Dave Alexander wrote:

By the way I have the version of Win 10 that does not require that. It has the better clock in it.

Hi Dave,

there is no such version of Windows. The Windows Internet Time sync has been unchanged for several versions, all that has changed are that the instructions for increasing the accuracy that only used to only be in the Windows Server documentation are now listed for the Desktop versions. Unless you have changed the relevant registry settings to increase the time accuracy you are still potentially only getting a time correction every 9 hours (2^15 seconds).

IMHO the best way to maintain accurate synchronization to UTC on Windows is to install a 3rd party tool like the Meinberg NTP Client and configure it correctly.


--
73
Bill
G4WJS.

 


--
73
Bill
G4WJS.


locked Re: Help

g4wjs
 

Hi Dave,

what instructions are you referring to?

What are the values of the following two Windows Registry keys?
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\MinPollInterval
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\MaxPollInterval

On 20/06/2019 12:12, Dave Alexander wrote:

I run a pre release version. The instructions for JTAlert and WSJT-X tell you if you have the version I have there is no need to run another time sync program.

 

I am running windows 10 home insider preview evaluation copy build 18917.rs_prerelease,19607-1942

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of g4wjs
Sent: Thursday, June 20, 2019 6:52 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help

 

On 20/06/2019 11:30, Dave Alexander wrote:

By the way I have the version of Win 10 that does not require that. It has the better clock in it.

Hi Dave,

there is no such version of Windows. The Windows Internet Time sync has been unchanged for several versions, all that has changed are that the instructions for increasing the accuracy that only used to only be in the Windows Server documentation are now listed for the Desktop versions. Unless you have changed the relevant registry settings to increase the time accuracy you are still potentially only getting a time correction every 9 hours (2^15 seconds).

IMHO the best way to maintain accurate synchronization to UTC on Windows is to install a 3rd party tool like the Meinberg NTP Client and configure it correctly.


--
73
Bill
G4WJS.



--
73
Bill
G4WJS.


locked Re: Help

 

I run a pre release version. The instructions for JTAlert and WSJT-X tell you if you have the version I have there is no need to run another time sync program.

 

I am running windows 10 home insider preview evaluation copy build 18917.rs_prerelease,19607-1942

 

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of g4wjs
Sent: Thursday, June 20, 2019 6:52 AM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help

 

On 20/06/2019 11:30, Dave Alexander wrote:

By the way I have the version of Win 10 that does not require that. It has the better clock in it.

Hi Dave,

there is no such version of Windows. The Windows Internet Time sync has been unchanged for several versions, all that has changed are that the instructions for increasing the accuracy that only used to only be in the Windows Server documentation are now listed for the Desktop versions. Unless you have changed the relevant registry settings to increase the time accuracy you are still potentially only getting a time correction every 9 hours (2^15 seconds).

IMHO the best way to maintain accurate synchronization to UTC on Windows is to install a 3rd party tool like the Meinberg NTP Client and configure it correctly.


--
73
Bill
G4WJS.


locked Re: New JTAlert 2.13.8 available

David Gould
 

I have installed this new version, but now there seems to be a problem with the Decodes history window not doing any filtering.  All lines from WSJT-X band activity window are appearing in the decodes history window.

I have re-instated the log adif file, closed and restarted JTAlert, and done a scan and rebuild, but the same problem exists.

Is there something else I have missed, or is there a bug?

Can I revert to the previous version? If so how?

JTAlert V 2.13.8   Decodes history V3 0.1.9

73,

Dave G3UEG



The Latest JTAlert version 2.13.8 is now available @ https://HamApps.com


The Release Notes...

  Changes:
    - Contest exchanges forced to upper-case when sent to N3FJP loggers.

  Fixes:
    - Non-responsive Minimize and Close buttons (traditional JTAlert) after
       Win10 v1903 update. Note, these buttons still don't display the normal
       color changes when the mouse pointer is hovered over the buttons, but
       are now responding to mouse-clicks.
    - Alerted DX Callsign coloring in WSJT-X applied to the wrong decode when
       another station is calling that DX Callsign in the same period as the DX
       is transmititng and their decode appears after the original DX decode.
    - B4 colors not being applied. (2.3.6 defect)


de Laurie VK3AMA


locked Re: Help

g4wjs
 

On 20/06/2019 11:30, Dave Alexander wrote:
By the way I have the version of Win 10 that does not require that. It has the better clock in it.

Hi Dave,

there is no such version of Windows. The Windows Internet Time sync has been unchanged for several versions, all that has changed are that the instructions for increasing the accuracy that only used to only be in the Windows Server documentation are now listed for the Desktop versions. Unless you have changed the relevant registry settings to increase the time accuracy you are still potentially only getting a time correction every 9 hours (2^15 seconds).

IMHO the best way to maintain accurate synchronization to UTC on Windows is to install a 3rd party tool like the Meinberg NTP Client and configure it correctly.


--
73
Bill
G4WJS.

12841 - 12860 of 37287