Date   

locked Re: Logging

G4NBC
 

Hi Mike
Many thanks for your advice.
All sorted now and back on air!

Best 73s Mike G4NBC 

On 30 Jul 2018 22:17, "Michael Black via Groups.Io" <mdblack98@...> wrote:
Turn on debugging "Setting/Enable Debug Recording" -- restart JTAlert -- repeat problem -- Help/Contact Support to send in the debug info.

de Mike W9MDB




On Monday, July 30, 2018, 3:34:57 PM CDT, G4NBC via Groups.Io <g4nbc@...> wrote:


Hi

JTalert seems to be getting into a loop. After working someone on FT8 I click ok to log to HRD logbook. It then logs over and over again multiple times until I close JTalert. Also I am getting callsign does not match station worked coming up as it does not clear the station I have just logged.

If you could offer me some help I would appreciate it.

73’s Mike G4NBC

Sent from Mail for Windows 10

 



locked Re: Logging

G4NBC
 

Hi Laurie
Thanks for your help it's all good now. The ports were the same!
Now back on the air and logging.

Best 73s Mike G4NBC 

On 30 Jul 2018 23:56, "HamApps Support (VK3AMA)" <vk3ama.ham.apps@...> wrote:
On 31/07/2018 2:34 AM, G4NBC via Groups.Io wrote:

Hi

JTalert seems to be getting into a loop. After working someone on FT8 I click ok to log to HRD logbook. It then logs over and over again multiple times until I close JTalert. Also I am getting callsign does not match station worked coming up as it does not clear the station I have just logged.

If you could offer me some help I would appreciate it.

73’s Mike G4NBC

Mike,

Do you have the WSJT-X UDP packet rebroadcast enabled (JTAlert Settings, "Applications -> WSJT-X" section)?
If so, then you likely have the rebroadcast port set to match that used by WSJT-X, they should be different. JTAlert needs to rebroadcast on a different port. If the port is matched to the WSJT-X port, then JTAlert would rebroadcast the WSJT-X logged QSO packet to itself, causing the effect your observing.

Let me know if this is the cause of your problem.

de Laurie VK3AMA



locked Re: JTAlert-X won't send QSO's to HRD anymore

chas cartmel
 

I put an extra 2 COM port into my PC with an expansion card. Works well.

 

73

Charlie

www.G4EST.me.uk

Twitter:@ccartmel

 

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of Stephen Taylor - K6SJT
Sent: 02 August 2018 05:20
To: Support@HamApps.groups.io
Subject: Re: [HamApps] JTAlert-X won't send QSO's to HRD anymore

 

Mike, are you trying to run HRD DM780?

I have a 590SG and use HRD Logging program ONLY. I don't even start the HRD program as HRD DM780 wants to control the com port which WSJT-X also needs to control the 590.

I just run WSJT-X to the 590 via com port, then open JT Alert, and just the HRD logging program only. This is very simple solution and works great and doesn't require setting up multiple com ports.

Hope this helps you -

Stephen
K6SJT 


Virus-free. www.avg.com


locked Re: JTAlert-X won't send QSO's to HRD anymore

Stephen - K6SJT
 

Mike, are you trying to run HRD DM780?

I have a 590SG and use HRD Logging program ONLY. I don't even start the HRD program as HRD DM780 wants to control the com port which WSJT-X also needs to control the 590.

I just run WSJT-X to the 590 via com port, then open JT Alert, and just the HRD logging program only. This is very simple solution and works great and doesn't require setting up multiple com ports.

Hope this helps you -

Stephen
K6SJT 


locked Re: JTAlert-X won't send QSO's to HRD anymore

Michael Black
 

Signalink is PTT only via VOX triggering from the PC side.  No CAT.

de Mike W9MDB




On Wednesday, August 1, 2018, 8:04:00 PM CDT, HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:


Robert,

So much going on in your description.

Does the SignalLink support CAT control?
I suggest, you get WSJT-X HRD Cat Control working first, then move onto
Getting JTAlert Logging working.

de Laurie VK3AMA

On 2/08/2018 10:03 AM, Robert wrote:
> This is one of those issue where you don't know who to ask because
> there are several things in play here.
>
> My understanding of JTAlert-X is that it is responsible for looking up
> the QSO info on QRZ.com, and installing the name and such to the
> completed QSO from WSJT, and sending it on it's way to the HRD
> Logbook, "My Logbook".
> While I have been using this successfully for about a year now with no
> problems with my Kenwood TS-590S and HRD, I had to install a SignaLink
> sound card for other reasons.  I don't use the Kenwood internal
> soundcard anymore.
>
> Rather than get Carpel Tunnel from retyping everything, let me paste
> my question I posted recently to the WSJT Users Group.
> Please understand that the most important part of these two problems
> (for me) is to get JTAlert-X to send a completed QSO to the HRD
> Logbook.   That's why I'm here.
>
> I'm having a problem setting up WSJT-X (1.9.1) / JTAlertX  to work with
> HRD like it used to.
> To simplify digital mode control, I eliminated using the Kenwood TS-590S
> sound card, and reinstalled my SignaLink sound card instead.  HRD helped
> me with the setup and the DM-780 is working fine for all digital modes,
> logging included.
>
> WSJT / JTAlertX used to work perfectly with HRD before this point also,
> logging all my contacts from WSJT/JTAlertX into HRD, changing the radio
> frequency as I switched WSJT to different bands/modes, etc. Perfect.
>
> Two problems:  (HRD running as normal)
> 1.  I have no CAT control.  I can't change bands, in fact the bands
> window doesn't show you what band you are on.  Before using the
> SignaLink, I would simply change to another band/frequency using the
> dropdown box, then the radio would change to that band/frequency, as
> well as the SteppIR antenna.
> It transmits fine, receives fine, and the Power and Receive levels are
> controlled via the SignaLink as they should be now.  Strangely enough,
> if I change the band on the radio, WSJT will follow suit, but the
> dropdown box will not work that shows you what frequency you should be on.
>
> 2.  It logs the QSO's into the WSJT ADIF file, but JTAlertX does not
> transfer the completed QSO into HRD anymore.
>
> Here is my setup as best i can describe it.
>
> HRD for software.
> Kenwood TS-590S
> SignaLink sound card.
> Win10 OS.
>
> Kenwood TS-590S, Menu #63 Set to ACC2 port for Data Communication.
> One cable from the Kenwood ACC2 Port into the SignaLink USB port, then
> the outgoing SignaLink port (Radio) going to USB #5 Codec in the computer.
> One cable from the Kenwood USB port direct to the USB #8 Codec in the
> computer. (for HRD control)
>
> WSJT Settings
>
> Tab "Radio"
> Rig:  Kenwood TS-590S
> Left Pane:  COM 4   (USB #5 Codec), Eight, two, Hardware
> Right Pane:   CAT, Rear Data, USB, None
>
> Tab "Audio"
> Audio:   Both Input & Output  (5-USB Audio Codec)
>
> JTAlertX Settings
>
> Enable HRD V5/VB6 Logging, Checked
> Settings / HRD V5/V6 / PC IPv4 Address  127.0.0.1
> Settings / Sound Card / [3] Speakers / headphones (Realtek)  (This
> enables JTAlertX to announce the wanted Countries, etc through the
> stereo speaker system)
>
> That's everything I can think of to describe my situation.
> I had a previous WSJT situation which I won't go into now because adding
> the SignaLink cured that problem. (as well as some others)
>
> So the current status is that WSJT and JTAlert-X is working as it's
> own entity.
> 1.  JTAletrs-X won't send completed logs to HRD.
> 2.  I have no CAT control using WSJT.
>
> These are probably related, I don't know, but I'm looking for help
> from wherever I can get it.
>
> Thanks in advance,
> Robert  AC2MM





locked Re: Main window clear

 

Using Windows Defender on Windows 10 64 bit without the April 2008 update (which causes driver issues).
--
73, Bernie, VE3FWF


locked Re: JTAlert-X won't send QSO's to HRD anymore

Dave Garber
 

I have hrd on a ts590sg, with cat , if I can help.  you must have the db9 connection on the back, while the signalink should be set to vox, for ptt.  do you have the serial port via a usb adapter??

need more info on how you expect cat...  not via the signalink usb


Dave Garber
VE3WEJ / VE3IE

On Wed, Aug 1, 2018 at 9:16 PM, Robert <Robert@...> wrote:
de Laurie,
Oops, I know you didn't see my latest post because I asked the Moderator to pull the post itself.  I got it working again, most likely due to a reboot, but it's sending logs normally now again to HRD.  Sorry about that miscommunication.

Thanks,

Robert AC2MM


On 8/1/2018 9:09 PM, Robert wrote:
de Laurie,
If you saw my latest post, the JTAlert-X/Logging issue is resolved.
The CAT issue remains the final problem I need help with.

Thanks,

Robert AC2MM


On 8/1/2018 9:03 PM, HamApps Support (VK3AMA) wrote:
Robert,

So much going on in your description.

Does the SignalLink support CAT control?
I suggest, you get WSJT-X HRD Cat Control working first, then move onto Getting JTAlert Logging working.

de Laurie VK3AMA

On 2/08/2018 10:03 AM, Robert wrote:
This is one of those issue where you don't know who to ask because there are several things in play here.

My understanding of JTAlert-X is that it is responsible for looking up the QSO info on QRZ.com, and installing the name and such to the completed QSO from WSJT, and sending it on it's way to the HRD Logbook, "My Logbook".
While I have been using this successfully for about a year now with no problems with my Kenwood TS-590S and HRD, I had to install a SignaLink sound card for other reasons.  I don't use the Kenwood internal soundcard anymore.

Rather than get Carpel Tunnel from retyping everything, let me paste my question I posted recently to the WSJT Users Group.
Please understand that the most important part of these two problems (for me) is to get JTAlert-X to send a completed QSO to the HRD Logbook.   That's why I'm here.

I'm having a problem setting up WSJT-X (1.9.1) / JTAlertX  to work with
HRD like it used to.
To simplify digital mode control, I eliminated using the Kenwood TS-590S
sound card, and reinstalled my SignaLink sound card instead. HRD helped
me with the setup and the DM-780 is working fine for all digital modes,
logging included.

WSJT / JTAlertX used to work perfectly with HRD before this point also,
logging all my contacts from WSJT/JTAlertX into HRD, changing the radio
frequency as I switched WSJT to different bands/modes, etc. Perfect.

Two problems:  (HRD running as normal)
1.  I have no CAT control.  I can't change bands, in fact the bands
window doesn't show you what band you are on.  Before using the
SignaLink, I would simply change to another band/frequency using the
dropdown box, then the radio would change to that band/frequency, as
well as the SteppIR antenna.
It transmits fine, receives fine, and the Power and Receive levels are
controlled via the SignaLink as they should be now.  Strangely enough,
if I change the band on the radio, WSJT will follow suit, but the
dropdown box will not work that shows you what frequency you should be on.

2.  It logs the QSO's into the WSJT ADIF file, but JTAlertX does not
transfer the completed QSO into HRD anymore.

Here is my setup as best i can describe it.

HRD for software.
Kenwood TS-590S
SignaLink sound card.
Win10 OS.

Kenwood TS-590S, Menu #63 Set to ACC2 port for Data Communication.
One cable from the Kenwood ACC2 Port into the SignaLink USB port, then
the outgoing SignaLink port (Radio) going to USB #5 Codec in the computer.
One cable from the Kenwood USB port direct to the USB #8 Codec in the
computer. (for HRD control)

WSJT Settings

Tab "Radio"
Rig:  Kenwood TS-590S
Left Pane:  COM 4   (USB #5 Codec), Eight, two, Hardware
Right Pane:   CAT, Rear Data, USB, None

Tab "Audio"
Audio:   Both Input & Output  (5-USB Audio Codec)

JTAlertX Settings

Enable HRD V5/VB6 Logging, Checked
Settings / HRD V5/V6 / PC IPv4 Address  127.0.0.1
Settings / Sound Card / [3] Speakers / headphones (Realtek) (This
enables JTAlertX to announce the wanted Countries, etc through the
stereo speaker system)

That's everything I can think of to describe my situation.
I had a previous WSJT situation which I won't go into now because adding
the SignaLink cured that problem. (as well as some others)

So the current status is that WSJT and JTAlert-X is working as it's own entity.
1.  JTAletrs-X won't send completed logs to HRD.
2.  I have no CAT control using WSJT.

These are probably related, I don't know, but I'm looking for help from wherever I can get it.

Thanks in advance,
Robert  AC2MM














locked Re: JTAlert-X won't send QSO's to HRD anymore

Robert <Robert@...>
 

de Laurie,
Oops, I know you didn't see my latest post because I asked the Moderator to pull the post itself.  I got it working again, most likely due to a reboot, but it's sending logs normally now again to HRD.  Sorry about that miscommunication.

Thanks,

Robert AC2MM

On 8/1/2018 9:09 PM, Robert wrote:
de Laurie,
If you saw my latest post, the JTAlert-X/Logging issue is resolved.
The CAT issue remains the final problem I need help with.

Thanks,

Robert AC2MM


On 8/1/2018 9:03 PM, HamApps Support (VK3AMA) wrote:
Robert,

So much going on in your description.

Does the SignalLink support CAT control?
I suggest, you get WSJT-X HRD Cat Control working first, then move onto Getting JTAlert Logging working.

de Laurie VK3AMA

On 2/08/2018 10:03 AM, Robert wrote:
This is one of those issue where you don't know who to ask because there are several things in play here.

My understanding of JTAlert-X is that it is responsible for looking up the QSO info on QRZ.com, and installing the name and such to the completed QSO from WSJT, and sending it on it's way to the HRD Logbook, "My Logbook".
While I have been using this successfully for about a year now with no problems with my Kenwood TS-590S and HRD, I had to install a SignaLink sound card for other reasons.  I don't use the Kenwood internal soundcard anymore.

Rather than get Carpel Tunnel from retyping everything, let me paste my question I posted recently to the WSJT Users Group.
Please understand that the most important part of these two problems (for me) is to get JTAlert-X to send a completed QSO to the HRD Logbook.   That's why I'm here.

I'm having a problem setting up WSJT-X (1.9.1) / JTAlertX  to work with
HRD like it used to.
To simplify digital mode control, I eliminated using the Kenwood TS-590S
sound card, and reinstalled my SignaLink sound card instead. HRD helped
me with the setup and the DM-780 is working fine for all digital modes,
logging included.

WSJT / JTAlertX used to work perfectly with HRD before this point also,
logging all my contacts from WSJT/JTAlertX into HRD, changing the radio
frequency as I switched WSJT to different bands/modes, etc. Perfect.

Two problems:  (HRD running as normal)
1.  I have no CAT control.  I can't change bands, in fact the bands
window doesn't show you what band you are on.  Before using the
SignaLink, I would simply change to another band/frequency using the
dropdown box, then the radio would change to that band/frequency, as
well as the SteppIR antenna.
It transmits fine, receives fine, and the Power and Receive levels are
controlled via the SignaLink as they should be now.  Strangely enough,
if I change the band on the radio, WSJT will follow suit, but the
dropdown box will not work that shows you what frequency you should be on.

2.  It logs the QSO's into the WSJT ADIF file, but JTAlertX does not
transfer the completed QSO into HRD anymore.

Here is my setup as best i can describe it.

HRD for software.
Kenwood TS-590S
SignaLink sound card.
Win10 OS.

Kenwood TS-590S, Menu #63 Set to ACC2 port for Data Communication.
One cable from the Kenwood ACC2 Port into the SignaLink USB port, then
the outgoing SignaLink port (Radio) going to USB #5 Codec in the computer.
One cable from the Kenwood USB port direct to the USB #8 Codec in the
computer. (for HRD control)

WSJT Settings

Tab "Radio"
Rig:  Kenwood TS-590S
Left Pane:  COM 4   (USB #5 Codec), Eight, two, Hardware
Right Pane:   CAT, Rear Data, USB, None

Tab "Audio"
Audio:   Both Input & Output  (5-USB Audio Codec)

JTAlertX Settings

Enable HRD V5/VB6 Logging, Checked
Settings / HRD V5/V6 / PC IPv4 Address  127.0.0.1
Settings / Sound Card / [3] Speakers / headphones (Realtek) (This
enables JTAlertX to announce the wanted Countries, etc through the
stereo speaker system)

That's everything I can think of to describe my situation.
I had a previous WSJT situation which I won't go into now because adding
the SignaLink cured that problem. (as well as some others)

So the current status is that WSJT and JTAlert-X is working as it's own entity.
1.  JTAletrs-X won't send completed logs to HRD.
2.  I have no CAT control using WSJT.

These are probably related, I don't know, but I'm looking for help from wherever I can get it.

Thanks in advance,
Robert  AC2MM




locked Re: JTAlert-X won't send QSO's to HRD anymore

Robert <Robert@...>
 

de Laurie,
If you saw my latest post, the JTAlert-X/Logging issue is resolved.
The CAT issue remains the final problem I need help with.

Thanks,

Robert AC2MM

On 8/1/2018 9:03 PM, HamApps Support (VK3AMA) wrote:
Robert,

So much going on in your description.

Does the SignalLink support CAT control?
I suggest, you get WSJT-X HRD Cat Control working first, then move onto Getting JTAlert Logging working.

de Laurie VK3AMA

On 2/08/2018 10:03 AM, Robert wrote:
This is one of those issue where you don't know who to ask because there are several things in play here.

My understanding of JTAlert-X is that it is responsible for looking up the QSO info on QRZ.com, and installing the name and such to the completed QSO from WSJT, and sending it on it's way to the HRD Logbook, "My Logbook".
While I have been using this successfully for about a year now with no problems with my Kenwood TS-590S and HRD, I had to install a SignaLink sound card for other reasons.  I don't use the Kenwood internal soundcard anymore.

Rather than get Carpel Tunnel from retyping everything, let me paste my question I posted recently to the WSJT Users Group.
Please understand that the most important part of these two problems (for me) is to get JTAlert-X to send a completed QSO to the HRD Logbook.   That's why I'm here.

I'm having a problem setting up WSJT-X (1.9.1) / JTAlertX  to work with
HRD like it used to.
To simplify digital mode control, I eliminated using the Kenwood TS-590S
sound card, and reinstalled my SignaLink sound card instead. HRD helped
me with the setup and the DM-780 is working fine for all digital modes,
logging included.

WSJT / JTAlertX used to work perfectly with HRD before this point also,
logging all my contacts from WSJT/JTAlertX into HRD, changing the radio
frequency as I switched WSJT to different bands/modes, etc. Perfect.

Two problems:  (HRD running as normal)
1.  I have no CAT control.  I can't change bands, in fact the bands
window doesn't show you what band you are on.  Before using the
SignaLink, I would simply change to another band/frequency using the
dropdown box, then the radio would change to that band/frequency, as
well as the SteppIR antenna.
It transmits fine, receives fine, and the Power and Receive levels are
controlled via the SignaLink as they should be now.  Strangely enough,
if I change the band on the radio, WSJT will follow suit, but the
dropdown box will not work that shows you what frequency you should be on.

2.  It logs the QSO's into the WSJT ADIF file, but JTAlertX does not
transfer the completed QSO into HRD anymore.

Here is my setup as best i can describe it.

HRD for software.
Kenwood TS-590S
SignaLink sound card.
Win10 OS.

Kenwood TS-590S, Menu #63 Set to ACC2 port for Data Communication.
One cable from the Kenwood ACC2 Port into the SignaLink USB port, then
the outgoing SignaLink port (Radio) going to USB #5 Codec in the computer.
One cable from the Kenwood USB port direct to the USB #8 Codec in the
computer. (for HRD control)

WSJT Settings

Tab "Radio"
Rig:  Kenwood TS-590S
Left Pane:  COM 4   (USB #5 Codec), Eight, two, Hardware
Right Pane:   CAT, Rear Data, USB, None

Tab "Audio"
Audio:   Both Input & Output  (5-USB Audio Codec)

JTAlertX Settings

Enable HRD V5/VB6 Logging, Checked
Settings / HRD V5/V6 / PC IPv4 Address  127.0.0.1
Settings / Sound Card / [3] Speakers / headphones (Realtek) (This
enables JTAlertX to announce the wanted Countries, etc through the
stereo speaker system)

That's everything I can think of to describe my situation.
I had a previous WSJT situation which I won't go into now because adding
the SignaLink cured that problem. (as well as some others)

So the current status is that WSJT and JTAlert-X is working as it's own entity.
1.  JTAletrs-X won't send completed logs to HRD.
2.  I have no CAT control using WSJT.

These are probably related, I don't know, but I'm looking for help from wherever I can get it.

Thanks in advance,
Robert  AC2MM


locked Re: Main window clear

JTAlert Support (VK3AMA)
 

On 1/08/2018 12:04 PM, Ham Radio wrote:

Laurie:

Disabling the receipt of Text Messages fixes the clearing issue!


--
73, Bernie, VE3FWF
Bernie,

Thanks for reporting back (not all users are so accommodating when trying to resolve technical issues).

What virus/Malware protection are you using?

de Laurie VK3AMA


locked Re: OH/R2DHF

JTAlert Support (VK3AMA)
 

On 1/08/2018 11:50 PM, Björn Ekelund wrote:
was just identified as Åland by JTAlert. 

I wish it was true but it's unfortunately just vanilla Finland. 

73,

Björn SM7IUN
Bjorn,

Confirmed. This is a defect.

de Laurie VK3AMA


locked Re: JTAlert-X won't send QSO's to HRD anymore

JTAlert Support (VK3AMA)
 

Robert,

So much going on in your description.

Does the SignalLink support CAT control?
I suggest, you get WSJT-X HRD Cat Control working first, then move onto Getting JTAlert Logging working.

de Laurie VK3AMA

On 2/08/2018 10:03 AM, Robert wrote:
This is one of those issue where you don't know who to ask because there are several things in play here.

My understanding of JTAlert-X is that it is responsible for looking up the QSO info on QRZ.com, and installing the name and such to the completed QSO from WSJT, and sending it on it's way to the HRD Logbook, "My Logbook".
While I have been using this successfully for about a year now with no problems with my Kenwood TS-590S and HRD, I had to install a SignaLink sound card for other reasons.  I don't use the Kenwood internal soundcard anymore.

Rather than get Carpel Tunnel from retyping everything, let me paste my question I posted recently to the WSJT Users Group.
Please understand that the most important part of these two problems (for me) is to get JTAlert-X to send a completed QSO to the HRD Logbook.   That's why I'm here.

I'm having a problem setting up WSJT-X (1.9.1) / JTAlertX  to work with
HRD like it used to.
To simplify digital mode control, I eliminated using the Kenwood TS-590S
sound card, and reinstalled my SignaLink sound card instead.  HRD helped
me with the setup and the DM-780 is working fine for all digital modes,
logging included.

WSJT / JTAlertX used to work perfectly with HRD before this point also,
logging all my contacts from WSJT/JTAlertX into HRD, changing the radio
frequency as I switched WSJT to different bands/modes, etc. Perfect.

Two problems:  (HRD running as normal)
1.  I have no CAT control.  I can't change bands, in fact the bands
window doesn't show you what band you are on.  Before using the
SignaLink, I would simply change to another band/frequency using the
dropdown box, then the radio would change to that band/frequency, as
well as the SteppIR antenna.
It transmits fine, receives fine, and the Power and Receive levels are
controlled via the SignaLink as they should be now.  Strangely enough,
if I change the band on the radio, WSJT will follow suit, but the
dropdown box will not work that shows you what frequency you should be on.

2.  It logs the QSO's into the WSJT ADIF file, but JTAlertX does not
transfer the completed QSO into HRD anymore.

Here is my setup as best i can describe it.

HRD for software.
Kenwood TS-590S
SignaLink sound card.
Win10 OS.

Kenwood TS-590S, Menu #63 Set to ACC2 port for Data Communication.
One cable from the Kenwood ACC2 Port into the SignaLink USB port, then
the outgoing SignaLink port (Radio) going to USB #5 Codec in the computer.
One cable from the Kenwood USB port direct to the USB #8 Codec in the
computer. (for HRD control)

WSJT Settings

Tab "Radio"
Rig:  Kenwood TS-590S
Left Pane:  COM 4   (USB #5 Codec), Eight, two, Hardware
Right Pane:   CAT, Rear Data, USB, None

Tab "Audio"
Audio:   Both Input & Output  (5-USB Audio Codec)

JTAlertX Settings

Enable HRD V5/VB6 Logging, Checked
Settings / HRD V5/V6 / PC IPv4 Address  127.0.0.1
Settings / Sound Card / [3] Speakers / headphones (Realtek)  (This
enables JTAlertX to announce the wanted Countries, etc through the
stereo speaker system)

That's everything I can think of to describe my situation.
I had a previous WSJT situation which I won't go into now because adding
the SignaLink cured that problem. (as well as some others)

So the current status is that WSJT and JTAlert-X is working as it's own entity.
1.  JTAletrs-X won't send completed logs to HRD.
2.  I have no CAT control using WSJT.

These are probably related, I don't know, but I'm looking for help from wherever I can get it.

Thanks in advance,
Robert  AC2MM


locked JTAlert-X won't send QSO's to HRD anymore

Robert <Robert@...>
 

This is one of those issue where you don't know who to ask because there are several things in play here.

My understanding of JTAlert-X is that it is responsible for looking up the QSO info on QRZ.com, and installing the name and such to the completed QSO from WSJT, and sending it on it's way to the HRD Logbook, "My Logbook".
While I have been using this successfully for about a year now with no problems with my Kenwood TS-590S and HRD, I had to install a SignaLink sound card for other reasons.  I don't use the Kenwood internal soundcard anymore.

Rather than get Carpel Tunnel from retyping everything, let me paste my question I posted recently to the WSJT Users Group.
Please understand that the most important part of these two problems (for me) is to get JTAlert-X to send a completed QSO to the HRD Logbook.   That's why I'm here.

I'm having a problem setting up WSJT-X (1.9.1) / JTAlertX  to work with
HRD like it used to.
To simplify digital mode control, I eliminated using the Kenwood TS-590S
sound card, and reinstalled my SignaLink sound card instead.  HRD helped
me with the setup and the DM-780 is working fine for all digital modes,
logging included.

WSJT / JTAlertX used to work perfectly with HRD before this point also,
logging all my contacts from WSJT/JTAlertX into HRD, changing the radio
frequency as I switched WSJT to different bands/modes, etc.   Perfect.

Two problems:  (HRD running as normal)
1.  I have no CAT control.  I can't change bands, in fact the bands
window doesn't show you what band you are on.  Before using the
SignaLink, I would simply change to another band/frequency using the
dropdown box, then the radio would change to that band/frequency, as
well as the SteppIR antenna.
It transmits fine, receives fine, and the Power and Receive levels are
controlled via the SignaLink as they should be now.  Strangely enough,
if I change the band on the radio, WSJT will follow suit, but the
dropdown box will not work that shows you what frequency you should be on.

2.  It logs the QSO's into the WSJT ADIF file, but JTAlertX does not
transfer the completed QSO into HRD anymore.

Here is my setup as best i can describe it.

HRD for software.
Kenwood TS-590S
SignaLink sound card.
Win10 OS.

Kenwood TS-590S, Menu #63 Set to ACC2 port for Data Communication.
One cable from the Kenwood ACC2 Port into the SignaLink USB port, then
the outgoing SignaLink port (Radio) going to USB #5 Codec in the computer.
One cable from the Kenwood USB port direct to the USB #8 Codec in the
computer. (for HRD control)

WSJT Settings

Tab "Radio"
Rig:  Kenwood TS-590S
Left Pane:  COM 4   (USB #5 Codec), Eight, two, Hardware
Right Pane:   CAT, Rear Data, USB, None

Tab "Audio"
Audio:   Both Input & Output  (5-USB Audio Codec)

JTAlertX Settings

Enable HRD V5/VB6 Logging, Checked
Settings / HRD V5/V6 / PC IPv4 Address  127.0.0.1
Settings / Sound Card / [3] Speakers / headphones (Realtek)  (This
enables JTAlertX to announce the wanted Countries, etc through the
stereo speaker system)

That's everything I can think of to describe my situation.
I had a previous WSJT situation which I won't go into now because adding
the SignaLink cured that problem. (as well as some others)

So the current status is that WSJT and JTAlert-X is working as it's own entity.
1.  JTAletrs-X won't send completed logs to HRD.
2.  I have no CAT control using WSJT.

These are probably related, I don't know, but I'm looking for help from wherever I can get it.

Thanks in advance,
Robert  AC2MM


locked OH/R2DHF

Björn SM7IUN
 

was just identified as Åland by JTAlert. 

I wish it was true but it's unfortunately just vanilla Finland. 

73,

Björn SM7IUN


locked Re: Main window clear

 


Laurie:

Disabling the receipt of Text Messages fixes the clearing issue!


--
73, Bernie, VE3FWF


locked Re: Wanted alert for "CQ DX" fail

JTAlert Support (VK3AMA)
 

On 1/08/2018 9:57 AM, HamApps Support (VK3AMA) wrote:
On 31/07/2018 7:45 PM, Franco HB9oab wrote:
HI to all
I noticed a strange anomaly: when JTaertx must alarm a WANTED, as you can see well in the attached image, if there is a

1. CQ DX call the WANTED ALARM does not work
2. CQ NA call the WANTED ALARM works correctly
3. REPLY TO MYcall the WANTED ALARM works correctly
Franco,

Thanks for the report.

That looks like a defect, I will investigate.

de Laurie VK3AMA
Franco,

I can't find any fault. JTAlert ignores the "NA" and "DX" when determining the Alert type and that is what I am seeing in my tests. The same alerts are triggered regardless of the CQ type.
   

There might be something unusual with your config, Please use the "? -> Contact Support" menu, on the JTAlert title-bar, to send me your Configuration and Session files for analysis.

de Laurie VK3AMA


locked Re: Main window clear

JTAlert Support (VK3AMA)
 

On 30/07/2018 12:20 AM, Ham Radio wrote:
Laurie:

I upgraded to 2.12.3 and the clearing  problem is still there. I tried various combinations of row and columns for the decode slots to no avail.

Not a serious issue, in my view.

I can send you a video of the behaviour if that helps.  100% reproducible.

--
73, Bernie, VE3FWF
Bernie,

As a test, since it is 100% reproducible at your end, open the JTAlert Settings, Web Services section, and disable the receipt of Text Messages, then restart JTAlert.
   
Is the Callsign non-clearing still present? Please advise.

de Laurie VK3AMA


locked Re: Wanted alert for "CQ DX" fail

JTAlert Support (VK3AMA)
 

On 31/07/2018 7:45 PM, Franco HB9oab wrote:
HI to all
I noticed a strange anomaly: when JTaertx must alarm a WANTED, as you can see well in the attached image, if there is a

1. CQ DX call the WANTED ALARM does not work
2. CQ NA call the WANTED ALARM works correctly
3. REPLY TO MYcall the WANTED ALARM works correctly
Franco,

Thanks for the report.

That looks like a defect, I will investigate.

de Laurie VK3AMA


locked Re: Worked before problem.

JTAlert Support (VK3AMA)
 

On 1/08/2018 2:06 AM, afa1yy wrote:
I still have the B4 problem.  I've moved to Florida and am putting my station back together.  I put my LOG4OM log  in a new  location  and it works OK with myLog4OM. I have this new log location updated in JT Alert and it logs QSO's OK.  My b4 file is the same one I used before, but It is "greyed out "  I cannot change it.  I just did aScan log & rebuild.  It now shows that I now need everything.  My new QSOs are being sent to a new B4 location. 
What do you suggest

Art K0AY
Art,

The Worked B4 Database File is greyed out (disabled) because you using one of the supported Loggers (Log4OM). The B4 database is ONLY used when there is no logger enabled in JTAlert. All B4 checks are done against your Logger.

If the Scan Log is not finding confirmed entries suggests that your new Log4OM log either doesn't contain your old log entries or you have a QSL confirmation type set for the Scan that is not present in your new Log.

de Laurie VK3AMA


locked hamspots.net login

Michael Black
 

Laurie -- would you consider moving the login frame to the top of site instead of the bottom?
The password savers like Google Smart Lock get hidden when it's at the bottom.

de Mike W9MDB


18641 - 18660 of 39839