Date   

locked Re: : WSTJ-X V 1.7.0

dh2id@...
 

Version 1.7.0 is in development. You must compile it from source code, which only
developers receive.


locked WSTJ-X V 1.7.0

pa7ra@...
 

Hi Happy New year.

I search  for WSTJ-X version 1.7.0 have some one the link for download this version?
I can only find the 1.6 version But after my pc crashed i will install it back on my pc!

tnx
RIen, PA7RA



locked Flag for "CQ DX"

K1DJE - Dave Corio
 

Laurie, I don't see anything in the archives about this, and perhaps I'm the only one having this problem, but here goes!

I have the word "DX" flagged in JTAlert to show with a specific color to help me avoid answering a CQ by an operator who calls "CQ DX" It works fine as long as the calling format is "CQ DX", however when an op uses the format "CQ AB1CDE DX", where the "DX" replaces the grid square, the "DX" is not flagged.

Is there currently a way, or would it be possible at some point to have the ability to flag a CQ that has "DX" standing alone - that is, where "DX" is not part of the call (KB3XDX) or part of the grid square (DX24)?

My reason for this is that in the few seconds available to reply to a CQ, it is very easy to start answering, only to realize that the caller wanted DX only.

Finally, does anyone on the forum know how I can start WSJTX with a higher task priority in Windows 10 by using the "Applications/Auto-Start/Parameters" function in JTAlert? I know how to change the priority by using Task Manager/Details, however that method does not persist between sessions.

Thanks, and Happy New Year to all!
KB3MOW


   



locked Re: JT alert on Linux

Ron / W4MMP
 

Hi Laurie,

I am running Debian Jessie on a RPi 2.  I will test also when the code is ready for beta.
73
Ron / W4MMP
On 1/1/2016 18:10, 'Laurie, VK3AMA' groups07@... [HamApps] wrote:

 

On 24/12/2015 4:30 PM, David djmunn@... [HamApps] wrote:
Hi Laurie.....you may remember i asked re JTAlert working on Linux with Wine
you said NO...someone saw the post and suggested i look at AlarmeJT.....
i found the software but found it is 64bit and i usually run 32bit for
compatability sake.......i have since found the 32bit version of
AlaremJT and with some work around got it to work...works quite well but
not as good a the JTAlert that you produce.....
--
73 David VK4BDJ
Hi David,

A "Heads Up". I am currently doing a ground-up rewrite of JTAlert using a new Language/Development enviornment (C# / Visual Studio), still under Windows. Part of this rewrite is the testing of all code modules and GUIs under Linux. That testing is being done under Ubuntu 14.04 LTS. Apart from some minor gui inconsistencies, I have not encounterd any JTAlert breaking features under Linux. I am reasonably confident that JTAlert will be available under Linux, possibly MacOS, some time in the first half of 2016.

de Laurie VK3AMA
   



locked Re: JT alert on Linux

BuDJie
 

Hi Again....Mono seems to work better than Wine....will load Mono ready for when you are..

David

On 02/01/16 09:29, 'Laurie, VK3AMA' groups07@... [HamApps] wrote:
 

On 2/01/2016 10:18 AM, David djmunn@... [HamApps] wrote:
Hi Laurie.....sounds great...if you need a Linux tester dont hesitate to ask..
im now running Linux Mint 17.3 (Ubuntu based) on 64 bit but can also run Ubuntu 15.10 also 64bit.....

73 David VK4BDJ
David,

As soon as I have code an end-user can test, I'll send it your way.
All my development and testing  (Windows and Linux) is 64bit.

I neglected to mention in my last message... for a native Windows .NET application to run under Linux & MacOS, Mono needs to be installed. I had no trouble installing Mono on my Ubuntu test environment and I don't regularly use Linux, so I'm sure you will have no issues ;) Think of Mono as just another prerequisite/dependency that needs to be installed as is typical when installing a new app to Linux :-)

de Laurie VK3AMA
   


--
73 David VK4BDJ


locked Re: New Country

Laurie, VK3AMA <groups07@...>
 

On 1/01/2016 11:46 AM, arthur@... [HamApps] wrote:
ON 60m.  I have worked several PA stations, when they show up, they get correctly labeled as B4.  However other PA stations flag the new country alarm.
The "wanted DXCC" correctly shows I have worked the Netherlands on JT65.
any suggestions?

Art
K0AY
Art,

Unless "PA" is marked as no longer needed, by either manually updating the "Wanted DXCC" settings or via a Scan Log, all new "PA" stations will still generate the Alert. JTAlert does not automatically remove a DXCC (or State, Grid, Zone, etc) once worked.

Most users only consider something as no longer needed after there has been a form of confirmation, Card, Lo
tw or eQSL, which happens long after the QSO (days, weeks, years perhaps). I chose to not allow JTAlert to automatically remove the Wanted Status by merely working a Station, but instead rely on a Scan Log or Manual update to change the status which is initiated by the user.

Also consider, if your tracking a Wanted DXCC by mode and have PA confirmed on JT65 and have updated the Wanted Lists to indicated PA is no longer needed, a decode of a PA station running JT9 will still generate the Alert.

If none of the above answers you question, please use the "? -> Contact Support" menu, on the JTAlert title-bar, to send me your Configuration and Session files for analysis. Include in that email the Callsign and Date/Time when you observed a Wanted Alert when there should have been no alert.
 

de Laurie VK3AMA
   


locked Re: JT alert on Linux

Laurie, VK3AMA <groups07@...>
 

On 2/01/2016 10:18 AM, David djmunn@... [HamApps] wrote:
Hi Laurie.....sounds great...if you need a Linux tester dont hesitate to ask..
im now running Linux Mint 17.3 (Ubuntu based) on 64 bit but can also run Ubuntu 15.10 also 64bit.....

73 David VK4BDJ
David,

As soon as I have code an end-user can test, I'll send it your way.
All my development and testing  (Windows and Linux) is 64bit.

I neglected to mention in my last message... for a native Windows .NET application to run under Linux & MacOS, Mono needs to be installed. I had no trouble installing Mono on my Ubuntu test environment and I don't regularly use Linux, so I'm sure you will have no issues ;) Think of Mono as just another prerequisite/dependency that needs to be installed as is typical when installing a new app to Linux :-)

de Laurie VK3AMA
   


locked Re: DXKeeper-JTAlert logging issue

Laurie, VK3AMA <groups07@...>
 

On 28/12/2015 12:17 PM, Dan Ziolkowski dan.ziolkowski@... [HamApps] wrote:
This problem happened again tonight, I tried to send to you via support option,  all seems to be progressing then get message- cant send email.

Numerous attempts, reboot of PC includied

Thanks Dan KC2STA

Dan,

I don't know why your support request is failing. There are no files stuck on the Server which happens when upload fails mid transmission. Perhaps your Firewall is blocking the attempt? The files are initially sent to the HamApps server via plain old FTP (to avoid user SMTP setup/authentication issues). Once on the Server, they are sent to me direct as emails.

Regarding the Date roll-over issue. I'll send you an updated JTAlert to test once I have identified the code defect.

I am away from my primary development PC until the second week of this month so cant get anything to yet until then.

de Laurie VK3AMA
   


locked Re: JT alert on Linux

BuDJie
 

Hi Laurie.....sounds great...if you need a Linux tester dont hesitate to ask..
im now running Linux Mint 17.3 (Ubuntu based) on 64 bit but can also run Ubuntu 15.10 also 64bit.....

73 David VK4BDJ


On 02/01/16 09:10, 'Laurie, VK3AMA' groups07@... [HamApps] wrote:
 

On 24/12/2015 4:30 PM, David djmunn@... [HamApps] wrote:
Hi Laurie.....you may remember i asked re JTAlert working on Linux with Wine
you said NO...someone saw the post and suggested i look at AlarmeJT.....
i found the software but found it is 64bit and i usually run 32bit for
compatability sake.......i have since found the 32bit version of
AlaremJT and with some work around got it to work...works quite well but
not as good a the JTAlert that you produce.....
--
73 David VK4BDJ
Hi David,

A "Heads Up". I am currently doing a ground-up rewrite of JTAlert using a new Language/Development enviornment (C# / Visual Studio), still under Windows. Part of this rewrite is the testing of all code modules and GUIs under Linux. That testing is being done under Ubuntu 14.04 LTS. Apart from some minor gui inconsistencies, I have not encounterd any JTAlert breaking features under Linux. I am reasonably confident that JTAlert will be available under Linux, possibly MacOS, some time in the first half of 2016.

de Laurie VK3AMA
   


--
73 David VK4BDJ


locked Re: JT alert on Linux

Laurie, VK3AMA <groups07@...>
 

On 24/12/2015 4:30 PM, David djmunn@... [HamApps] wrote:
Hi Laurie.....you may remember i asked re JTAlert working on Linux with Wine
you said NO...someone saw the post and suggested i look at AlarmeJT.....
i found the software but found it is 64bit and i usually run 32bit for
compatability sake.......i have since found the 32bit version of
AlaremJT and with some work around got it to work...works quite well but
not as good a the JTAlert that you produce.....
--
73 David VK4BDJ
Hi David,

A "Heads Up". I am currently doing a ground-up rewrite of JTAlert using a new Language/Development enviornment (C# / Visual Studio), still under Windows. Part of this rewrite is the testing of all code modules and GUIs under Linux. That testing is being done under Ubuntu 14.04 LTS. Apart from some minor gui inconsistencies, I have not encounterd any JTAlert breaking features under Linux. I am reasonably confident that JTAlert will be available under Linux, possibly MacOS, some time in the first half of 2016.

de Laurie VK3AMA
   


locked New Country

afa1yy
 

ON 60m.  I have worked several PA stations, when they show up, they get correctly labeled as B4.  However other PA stations flag the new country alarm.
The "wanted DXCC" correctly shows I have worked the Netherlands on JT65.
any suggestions?

Art
K0AY



locked Re: : Re: : Re: Comment in log field

boat.anchor@...
 


Well I did update to 2.6.27
Prev version wrkg with HRD5.0 Log would mark all Eqsl sent Eqsl Rcvd as "NO"
This version is not setting these anymore
Can I pls get some help finding the buttons for this
TVM
Barry


---In HamApps@..., <boat.anchor@...> wrote :

No worries
Time to update again.
Best of the NY es many tnx for outstanding program
Barry



---In HamApps@..., <groups07@...> wrote :


On 30/12/2015 1:47 PM, boat.anchor@... [HamApps] wrote:

Laurie

When I click on Settins/Logging in Ver 2.6.13 I don't see
anything like Restore Comments.
Am I confused again
best regards
Barry
Barry,

Sorry about that.
When I am referring to specific settings they are after checking my version of JTAlert which will always be the latest release.
The latest JTAlert is 2.6.27

de Laurie VK3AMA
   


locked Re: : Callsign change

Bob WB2NVR
 

TNX!  73 ES GUD DX, Bob WB2NVR


locked Re: : Callsign change

medfer@...
 

the change callsign program is and will be until i shut down forever ;-)
at:
Amateur Radio "Digital" Software

  73 HNY 2016

Ko, NL9222


locked Re: Callsign change

Laurie, VK3AMA <groups07@...>
 

On 30/12/2015 11:02 PM, wb2nvr@... [HamApps] wrote:

Hi Laurie - 


Sorry to bother you. I just tried to download the change callsign program, and got a 404 error. The link I tried was:


http://HamApps.HamSpots.net/dnl/ChangeStationCall.exe

The DropBox link was removed due to some recent reliability issues I had with DropBox.

de Laurie VK3AMA


locked Callsign change

Bob WB2NVR
 

Hi Laurie - 


Sorry to bother you. I just tried to download the change callsign program, and got a 404 error. The link I tried was:

Dropbox link to the file...
https://dl.dropboxusercontent.com/u/27804032/ChangeStationCall.exe

Is there a problem with Dropbox, or is there a new location for the file?

TNX for the great program and support. HNY!

73,

Bob WB2NVR



locked Re: : Re: : Re: Comment in log field

boat.anchor@...
 

No worries
Time to update again.
Best of the NY es many tnx for outstanding program
Barry



---In HamApps@..., <groups07@...> wrote :


On 30/12/2015 1:47 PM, boat.anchor@... [HamApps] wrote:

Laurie

When I click on Settins/Logging in Ver 2.6.13 I don't see
anything like Restore Comments.
Am I confused again
best regards
Barry
Barry,

Sorry about that.
When I am referring to specific settings they are after checking my version of JTAlert which will always be the latest release.
The latest JTAlert is 2.6.27

de Laurie VK3AMA
   


locked Re: : Re: Comment in log field

Laurie, VK3AMA <groups07@...>
 

On 30/12/2015 1:47 PM, boat.anchor@... [HamApps] wrote:

Laurie

When I click on Settins/Logging in Ver 2.6.13 I don't see
anything like Restore Comments.
Am I confused again
best regards
Barry
Barry,

Sorry about that.
When I am referring to specific settings they are after checking my version of JTAlert which will always be the latest release.
The latest JTAlert is 2.6.27

de Laurie VK3AMA
   


locked Re: : Re: Comment in log field

boat.anchor@...
 

Laurie
When I click on Settins/Logging in Ver 2.6.13 I don't see
anything like Restore Comments.
Am I confused again
best regards
Barry


Look under the "Logging" section of the JTAlert Settings and tick the "Restore Comments from last JTAlert session" checkbox. While still viewing that section click the Help button. Scroll down to the bottom of the resulting help topic and view all the "Comments and QSL Message Text Substitutions".

de Laurie VK3AMA
   



locked Re: Comment in log field

Dwaine Pipe
 

Hi Bill

 

Saw that – but if I was to put, say RST xx  and ticked the retain box, then that would keep the same xx for everyone, or at least that is my understanding?? Perhaps I’m wrong?

 

Cheers

David

 

From: HamApps@... [mailto:HamApps@...]
Sent: Wednesday, 30 December 2015 9:21 AM
To: HamApps@...
Subject: RE: [HamApps] Comment in log field

 

 

Hi David

 

Not sure about a JTAlert comment – but I use WSJT-X with JTAlert.  When I log a contact by hitting the “Log QSO” button in WSJT-X, a log window pops up.  That window has an entry for TX Power and one for Comments.  You can enter a comment in that field – and, if you wish, check a box to the right of the Comments box that says “retain.”  I have it retain TX Power because I rarely change power.

 

Not sure, but this may be what you remember.

 

73 & HNY,

Bill, W2KKJ

 

From: HamApps@... [mailto:HamApps@...]
Sent: Tuesday, December 29, 2015 4:57 PM
To: HamApps@...
Subject: [HamApps] Comment in log field

 

 

Morning All

 

I know I seen it but damned if I can remember where ........

 

How do I set a comment in the comment box when JTAlert logs a contact?   I know I can type it in each time but I’m sure I’ve seen somewhere you can set a default one (with special characters like in the macros)??  Or have I had too much egg-nog over Christmas.

 

Merry New Year to one and all ... looking for you on the waterfall J

 

Cheers

David

VK7YUM