locked Re: Clowns ( LIDS )

Rudy Benner <rudy@...>

Either their clock or you clock is off. Check yours.

Sent: Wednesday, September 18, 2013 11:47 PM
Subject: [HamApps] Clowns ( LIDS )

Just getting a kick out of some of the clowns on JT65 on 40 meters with the fake calls.  None of them come up in the call book. :-)
Seeing Calls like XW9JTH purporting to be calling calls like V36VI.
4L6PQS calling X71CHT
XO4ZQQ calling W88  no suffix
6I5HEH working V35 no suffix
Other assorted gibberish.
No matter where you go the LIDS appear and ruin it for the rest of us.  OY!
Gee ........... maybe I'm missing the greatest band conditions of the century!  :-)

On Wed, Sep 18, 2013 at 7:29 PM, Jim - N4ST <newsgroup@...> wrote:


WSJT-X is not very forgiving on the CAT connection.
If the connection fails one time, there is no retry, it simply disables the
So, if you turn your rig off first or break the connection with HRD (and I'm
guessing DXLAB works the same), WSJT-X will turn its CAT interface.
I found this out the hard way by logging/spotting a couple dozen QSOs on the
wrong frequency.

Jim - N4ST

From: HamApps@... [mailto:HamApps@...] On
Behalf Of John Hudson
Sent: Wednesday, September 18, 2013 08:59
To: HamApps@...
Subject: [HamApps] changing bands

I have a couple of questions concerning changing bands and see if it’s my
setup or this is the ways it works
1.       I cannot keep ENABLE CAT checked.. Almost every time I load WSJT-X
1.1 r3496 I have to go into CONFIG and check ENABLE CAT (rig = 9998
Commander for DXLab) Is this normal or is it suppose to stay checked all
2.       When I do check ENABLE CAT, I can select bands from WSJT drop down
menu for bands and the rig changes fine and WSJT changes fine, all is ok.
BUT if I change bands using COMMANDER ( I have JT freqs saved in the memory
slots) the rig changes, WSJT-X changes the frequency readout but the drop
down menu showing band does not AND the freq readout is red until I select
the correct band from drop down menu
Now the only reasons I ask is first, it’s pain to remember to change and my
log has entered the wrong band a few times plus I got an email form someone
that need KY for contact and they seen me reporting spots on the wrong
So is this normal or is something need to be changed?
John Hudson


Join Support@HamApps.groups.io to automatically receive all group messages.