locked Re: WSJT-X 2.5.0-rc1 / JTAlert 2.50.1 blank display #FT8


Joe Subich, W4TV
 

On 2021-06-12 11:29 PM, Dave Garber wrote:
Should the operator remove 5.0.7 and teinstall 5.0.6. Was that the
issue as well
No, NET 5.0.7 vs. 5.0.6 only impacts audio.

73,

... Joe, W4TV


On 2021-06-12 11:29 PM, Dave Garber wrote:
Should the operator remove 5.0.7 and teinstall 5.0.6. Was that the issue
as well
On Sat., Jun. 12, 2021, 2:39 p.m. Joe Subich, W4TV, <lists@subich.com>
wrote:


Use Multicast (including a multicast address - not 127.0.0.1).
See the Help Topic "WSJTX UDP Setup" in JT Alert -> Help.

Also, make sure that WSJTX, JT-Alert and Log4OM are *ALL* running
at USER level *NOT* "Run as Administrator".

73,

... Joe, W4TV


On 2021-06-12 12:14 PM, ag5pc@outlook.com wrote:
I just upgraded both WSJT-X and JTAlert to the latest versions. WSJT-X
works fine but JTAlert is blank. See attached screen shot. I get the UDP
error message and I've been through the UDP setup in the help file to no
avail. Per instructions, here is the status:

JTAlert Instance : #1
JTAlert Start Params : /wsjtx
WSJT-X Window Title : WSJT-X v2.5.0-rc1 by K1JT, G4WJS, K9AN, and
IV3NWV
WSJT-X Command Line : "C:\WSJT\wsjtx\bin\wsjtx.exe"
WSJT-X --rig-name :
WSJT-X Config File : C:\Users\Al\AppData\Local\WSJT-X\WSJT-X.ini
WSJT-X Version :
WSJT-X Revision :
WSJT-X Spec Op Mode : None
WSJT-X UDP ID :
WSJT-X UDP Port : 2237
WSJT-X UDP Server : 127.0.0.1
WSJT-X UDP MCast on LB : True
WSJT-X UDP Max Schema :

==================================================
UDP Ports used
--------------------------------------------------
JTAlert.exe : 60764 53991
JTAlertV2.Manager.exe : 61646 61647 61648
JTAlertV2.Decodes.exe :

==================================================
Audio output devices
--------------------------------------------------
[1] Speakers (Realtek High Definition Audio)
[2] DAX RESERVED IQ RX 1 (FlexRadio Systems DAX IQ)
[3] DAX RESERVED AUDIO RX 2 (FlexRadio Systems DAX Audio)
[4] DAX RESERVED MIC AUDIO (FlexRadio Systems DAX MIC Audio)
[5] DAX RESERVED IQ RX 4 (FlexRadio Systems DAX IQ)
[6] DAX RESERVED AUDIO RX 1 (FlexRadio Systems DAX Audio)
[7] DAX RESERVED IQ RX 2 (FlexRadio Systems DAX IQ)
[8] DAX RESERVED AUDIO RX 8 (FlexRadio Systems DAX Audio)
[9] DAX RESERVED AUDIO RX 6 (FlexRadio Systems DAX Audio)
[10] DAX RESERVED IQ RX 3 (FlexRadio Systems DAX IQ)
[11] DAX Audio TX (FlexRadio Systems DAX TX)
[12] DAX RESERVED AUDIO RX 3 (FlexRadio Systems DAX Audio)
[13] DAX RESERVED AUDIO RX 4 (FlexRadio Systems DAX Audio)
[14] DAX RESERVED AUDIO RX 7 (FlexRadio Systems DAX Audio)
[15] DAX RESERVED AUDIO RX 5 (FlexRadio Systems DAX Audio)

==================================================
JTAlertV2.Manager (2.50.1.0) status
(2021-06-12 15:52:23 utc)
--------------------------------------------------
CLR Version : 5.0.7
NET Framework : .NET 5.0.7
Architecture : x64 64bit
--------------------------------------------------
UDP Router : Initialized : YES (WSJT-X)
Audio : Initialized : YES (15 output devices)
BandData : Initialized : YES (started : 58)
Text Msgs : Initialized : YES (started : 17)
HamSpots : Initialized : YES
QRZ Xml : Initialized : YES (AG5PC)
HamQth Xml : Initialized : YES
QRZ Log : Initialized : YES
HamQth Log : Initialized : YES
ClubLog Log : Initialized : YES
Eqsl Log : Initialized : YES
HrdLog Log : Initialized : YES
DXLab DDE : Initialized : YES
User Alert : Initialized : YES
Updates Check : Initialized : YES (started : 3600)
Environment : Initialized : YES (started : 3600)
Maintenance : Initialized : YES (started : 3600)
--------------------------------------------------






Join Support@HamApps.groups.io to automatically receive all group messages.