locked Re: Help


The original problem was fixed by turning the computer, radio, and SignaLink off the restarting the computer, When it was fully booted, I started the radio then the Signalink. That caused the card to be recognized pr4operfly. The second problem I had was caused by no logging program, and some configuration.

-----Original Message-----
From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf Of John
Sent: Thursday, June 20, 2019 8:28 AM
To: support
Subject: Re: [HamApps] Help

Hi Dave,

What fixed your problem?


---------- Original Message ----------
From: Dave Alexander <dave.alexander1947@gmail.com>
Date: June 20, 2019 at 5:30 AM

Got it fixed. By the way I have the version of Win 10 that does not require
that. It has the better clock in it.

From: Support@HamApps.groups.io [mailto:Support@HamApps.groups.io] On Behalf
Of HamApps Support (VK3AMA)
Sent: Wednesday, June 19, 2019 10:14 PM
To: Support@HamApps.groups.io
Subject: Re: [HamApps] Help

On 20/06/2019 2:08 am, Dave Alexander wrote:

I am running windows 10 with a SignaLink usb. All is fine with FLDig but I
am not receiving anything with WSJT-X.
I do have activity on the wsjt-x waterfall. I need some suggestions.
Thanks for the help.


If your seeing activity on the Waterfall, but not getting any Decodes, the
most likely cause in your PC clock not is not accurate.
What time sync software are you using and how often is it syncing your

de Laurie VK3AMA

Join Support@HamApps.groups.io to automatically receive all group messages.