locked Re: JTAlert-X won't send QSO's to HRD anymore

Michael Black

Signalink is PTT only via VOX triggering from the PC side.  No CAT.

de Mike W9MDB

On Wednesday, August 1, 2018, 8:04:00 PM CDT, HamApps Support (VK3AMA) <vk3ama.ham.apps@...> wrote:


So much going on in your description.

Does the SignalLink support CAT control?
I suggest, you get WSJT-X HRD Cat Control working first, then move onto
Getting JTAlert Logging working.

de Laurie VK3AMA

On 2/08/2018 10:03 AM, Robert wrote:
> This is one of those issue where you don't know who to ask because
> there are several things in play here.
> My understanding of JTAlert-X is that it is responsible for looking up
> the QSO info on QRZ.com, and installing the name and such to the
> completed QSO from WSJT, and sending it on it's way to the HRD
> Logbook, "My Logbook".
> While I have been using this successfully for about a year now with no
> problems with my Kenwood TS-590S and HRD, I had to install a SignaLink
> sound card for other reasons.  I don't use the Kenwood internal
> soundcard anymore.
> Rather than get Carpel Tunnel from retyping everything, let me paste
> my question I posted recently to the WSJT Users Group.
> Please understand that the most important part of these two problems
> (for me) is to get JTAlert-X to send a completed QSO to the HRD
> Logbook.   That's why I'm here.
> I'm having a problem setting up WSJT-X (1.9.1) / JTAlertX  to work with
> HRD like it used to.
> To simplify digital mode control, I eliminated using the Kenwood TS-590S
> sound card, and reinstalled my SignaLink sound card instead.  HRD helped
> me with the setup and the DM-780 is working fine for all digital modes,
> logging included.
> WSJT / JTAlertX used to work perfectly with HRD before this point also,
> logging all my contacts from WSJT/JTAlertX into HRD, changing the radio
> frequency as I switched WSJT to different bands/modes, etc. Perfect.
> Two problems:  (HRD running as normal)
> 1.  I have no CAT control.  I can't change bands, in fact the bands
> window doesn't show you what band you are on.  Before using the
> SignaLink, I would simply change to another band/frequency using the
> dropdown box, then the radio would change to that band/frequency, as
> well as the SteppIR antenna.
> It transmits fine, receives fine, and the Power and Receive levels are
> controlled via the SignaLink as they should be now.  Strangely enough,
> if I change the band on the radio, WSJT will follow suit, but the
> dropdown box will not work that shows you what frequency you should be on.
> 2.  It logs the QSO's into the WSJT ADIF file, but JTAlertX does not
> transfer the completed QSO into HRD anymore.
> Here is my setup as best i can describe it.
> HRD for software.
> Kenwood TS-590S
> SignaLink sound card.
> Win10 OS.
> Kenwood TS-590S, Menu #63 Set to ACC2 port for Data Communication.
> One cable from the Kenwood ACC2 Port into the SignaLink USB port, then
> the outgoing SignaLink port (Radio) going to USB #5 Codec in the computer.
> One cable from the Kenwood USB port direct to the USB #8 Codec in the
> computer. (for HRD control)
> WSJT Settings
> Tab "Radio"
> Rig:  Kenwood TS-590S
> Left Pane:  COM 4   (USB #5 Codec), Eight, two, Hardware
> Right Pane:   CAT, Rear Data, USB, None
> Tab "Audio"
> Audio:   Both Input & Output  (5-USB Audio Codec)
> JTAlertX Settings
> Enable HRD V5/VB6 Logging, Checked
> Settings / HRD V5/V6 / PC IPv4 Address
> Settings / Sound Card / [3] Speakers / headphones (Realtek)  (This
> enables JTAlertX to announce the wanted Countries, etc through the
> stereo speaker system)
> That's everything I can think of to describe my situation.
> I had a previous WSJT situation which I won't go into now because adding
> the SignaLink cured that problem. (as well as some others)
> So the current status is that WSJT and JTAlert-X is working as it's
> own entity.
> 1.  JTAletrs-X won't send completed logs to HRD.
> 2.  I have no CAT control using WSJT.
> These are probably related, I don't know, but I'm looking for help
> from wherever I can get it.
> Thanks in advance,
> Robert  AC2MM

Join Support@HamApps.groups.io to automatically receive all group messages.